Screw an insert onto these tools and drive them a quarter to half-turn below the material's surface. They're compatible with helical inserts that have a prong.

Place the tip of these tools into installed inserts and push down to trigger the spring-loaded punch to break off the prong.

Thread these tools into an insert and turn counterclockwise to extract.

Install key-locking inserts, including Keensert®-style inserts.

Use these installation bits with power drills and drill presses as an alternative to a screwdriver for fast installation.

Attach these installation tips to a soldering iron. The tips transfer heat from the soldering iron to the insert, softening the surrounding plastic. When the plastic cools, it solidifies around the insert to keep it secure.

Strike these tools with a hammer or mallet to press threaded inserts into composites.

Set swage-locking inserts into place.

Assortments include various sizes of inserts, a soldering iron, a ceramic insulation tube, and installation tips.

Assortments include various sizes of helical inserts and a tap, a drill bit, and an installation tool for each thread size.

These kits have short-, normal-, and long-reach inserts, an installation tool, and a tap.

These inserts come with an installation tool. Drive the keys into the surrounding material for a more secure hold than thread-locking inserts.