About Sealant Flexibility
More
Thread Sealants with PTFE
PTFE provides a slippery surface that keeps threads from binding. These sealants are anaerobic, so they don’t begin to harden until coated surfaces are threaded together, blocking exposure to air.
Sealants with low locking strength prevent threads from loosening due to vibration and can be adjusted without tools.
Container | Max. Pressure, psi | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | For Fluids | For Gases | Temp. Range, °F | For Max. Thread Dia. | Consistency | Specifications Met | Color | Each | |
Low Locking Strength | ||||||||||||
Sealants | ||||||||||||
| 1.7 | Tube | 2 hrs. | 24 hrs. | 10,000 | 10,000 | -55° to 375° | 3" | Paste | UL Listed | Off-White | 00000000 | 000000 |
| 8.4 | Tube | 2 hrs. | 24 hrs. | 10,000 | 10,000 | -55° to 375° | 3" | Paste | UL Listed | Off-White | 00000000 | 00000 |
Non-Hardening Thread Sealants with PTFE
PTFE provides a slippery surface that keeps threads from binding. These sealants never fully harden, remaining pliable enough to self-heal and stop leaks before they start, so they’re often used in high-vibration applications that could cause standard thread sealants to fail. Since they have low locking strength, these sealants can be adjusted without tools.
Gasoila sealants are designed specifically to resist gasoline and fuel oils, making them best for motors, nozzles, pump assemblies, and fuel lines.
Sealants that meet NSF/ANSI 61 adhere to safety standards for drinking water systems.
VOC-free sealants won’t harm the environment and comply with LEED Green Building standards. VOC stands for volatile organic compound.
VOC regulations restrict sales of sealants that cannot be sold to the listed jurisdictions/areas.
Container | Max. Pressure, psi | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | For Fluids | For Gases | Temp. Range, °F | For Max. Thread Dia. | Consistency | Specifications Met | Color | Cannot Be Sold To | Features | Each | |
Low Locking Strength | |||||||||||||
Loctite® Sealants | |||||||||||||
| 5113 | 16 | Brush-Top Can | Not Rated | Not Rated | -65° to 300° | 2" | Paste | __ | White | Los Angeles Area | __ | 0000000 | 000000 |
Gasoila Sealants | |||||||||||||
| GE04 | 4 | Brush-Top Can | 10,000 | 3,000 | -100° to 600° | 2" | Paste | UL Classified | Green | __ | __ | 00000000 | 00000 |
| GE08 | 8 | Brush-Top Can | 10,000 | 3,000 | -100° to 600° | 2" | Paste | UL Classified | Green | __ | __ | 00000000 | 00000 |
| GE16 | 16 | Brush-Top Can | 10,000 | 3,000 | -100° to 600° | 2" | Paste | UL Classified | Green | __ | __ | 00000000 | 00000 |
Vibra-Tite Sealants | |||||||||||||
| 480 | 4 | Brush-Top Can | 10,000 | 2,000 | -65° to 500° | 2" | Paste | __ | White | __ | __ | 00000000 | 00000 |
| 480 | 8 | Brush-Top Can | 10,000 | 2,000 | -65° to 500° | 2" | Paste | __ | White | __ | __ | 00000000 | 00000 |
| 480 | 16 | Brush-Top Can | 10,000 | 2,000 | -65° to 500° | 2" | Paste | __ | White | __ | __ | 00000000 | 00000 |
| 486 | 4 | Brush-Top Can | 150 | 100 | -55° to 300° | 2" | Paste | __ | White | CO, CT, DC, DE, IL, IN, MA, MD, ME, MI, NH, NJ, Northern VA, NY, OH, PA, RI, UT | __ | 00000000 | 00000 |
| 486 | 8 | Brush-Top Can | 150 | 100 | -55° to 300° | 2" | Paste | __ | White | CO, CT, DC, DE, IL, IN, MA, MD, ME, MI, NH, NJ, Northern VA, NY, OH, PA, RI, UT | __ | 00000000 | 00000 |
| 486 | 16 | Brush-Top Can | 150 | 100 | -55° to 300° | 2" | Paste | __ | White | CO, CT, DC, DE, IL, IN, MA, MD, ME, MI, NH, NJ, Northern VA, NY, OH, PA, RI, UT | __ | 00000000 | 00000 |
Sealants | |||||||||||||
| __ | 2 | Tube | 10,000 | 3,000 | -100° to 600° | 3" | Paste | CSA Certified, CSA-US Certified, UL Classified | Blue | __ | __ | 0000000 | 0000 |
| __ | 4 | Brush-Top Can | 10,000 | 3,000 | -100° to 600° | 3" | Paste | CSA Certified, CSA-US Certified, UL Classified | Blue | __ | __ | 0000000 | 00000 |
| __ | 4 | Brush-Top Can | 10,000 | 3,000 | -50° to 500° | 2" | Paste | C-UL Classified, NSF/ANSI 61, UL Classified | Off-White | __ | VOC Free | 00000000 | 00000 |
| __ | 8 | Brush-Top Can | 10,000 | 3,000 | -100° to 600° | 3" | Paste | CSA Certified, CSA-US Certified, UL Classified | Blue | __ | __ | 0000000 | 00000 |
| __ | 8 | Brush-Top Can | 10,000 | 3,000 | -50° to 500° | 2" | Paste | C-UL Classified, NSF/ANSI 61, UL Classified | Off-White | __ | VOC Free | 00000000 | 00000 |
| __ | 16 | Brush-Top Can | 10,000 | 3,000 | -50° to 500° | 2" | Paste | C-UL Classified, NSF/ANSI 61, UL Classified | Off-White | __ | VOC Free | 00000000 | 00000 |
| __ | 32 | Brush-Top Can | 10,000 | 3,000 | -50° to 500° | 2" | Paste | C-UL Classified, NSF/ANSI 61, UL Classified | Off-White | __ | VOC Free | 00000000 | 00000 |
Drip-Free Non-Hardening Thread Sealants with PTFE
Apply these thread sealant sticks without a mess. They contain PTFE, which provides a slippery surface that keeps threads from binding. These sealants never fully harden, remaining pliable enough to self-heal and stop leaks before they start, so they’re often used in high-vibration applications that could cause standard thread sealants to fail. Since they have low locking strength, these sealants can be adjusted without tools. They meet NSF/ANSI 61 for use with drinking water.
Container | Max. Pressure, psi | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Net Weight, oz. | Type | For Fluids | For Gases | Temp. Range, °F | For Max. Thread Dia. | Consistency | Specifications Met | Environment | Color | Each | |
Low Locking Strength | |||||||||||
Slic-Tite Sealants | |||||||||||
| 1.2 | Stick | 5,000 | 500 | -50° to 350° | 2" | Semi-Solid | NSF/ANSI 61 | Food Industry | White | 0000000 | 000000 |
Sealants | |||||||||||
| 1.3 | Stick | 2,000 | 350 | -50° to 350° | 2" | Semi-Solid | NSF/ANSI 61, UL Listed | Food Industry | Off-White | 0000000 | 0000 |
| 4 | Stick | 2,000 | 350 | -50° to 350° | 2" | Semi-Solid | NSF/ANSI 61, UL Listed | Food Industry | Off-White | 0000000 | 0000 |
Non-Hardening Thread Sealants
Often used in high-vibration applications that could cause standard thread sealants to fail, these never fully harden and remain pliable enough to self-heal and stop leaks before they start. Formulated without PTFE, these sealants are less slippery and less likely to result in overtightenting than sealants that have PTFE, making them good for plastic pipe where overtightening could lead to cracks and breaks. They have low locking strength, so they can be adjusted without tools.
To adhere to safety standards for drinking water systems, use sealants that meet NSF/ANSI 61.
Sealants that cannot be sold to the listed regions are restricted due to local VOC (Volatile Organic Compounds) regulations.
Container | Max. Pressure, psi | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size | Type | For Fluids | For Gases | Minimum Temp., °F | Maximum Temp., °F | For Max. Thread Dia. | Consistency | Specifications Met | Color | Cannot Be Sold To | Each | |
Low Locking Strength | |||||||||||||
Vibra-Tite Sealants | |||||||||||||
| 481 | 2.4 fl. oz. | Tube | 150 | 100 | -65° | 500° | 2" | Paste | __ | Off-White | CO, CT, DC, DE, IL, IN, MA, MD, ME, MI, NH, NJ, NY, OH, PA, RI, UT, Northern VA | 00000000 | 000000 |
Sealants | |||||||||||||
| __ | 2 fl. oz. | Brush-Top Bottle | 10,000 | 300 | -65° | 450° | 2" | Paste | MIL-S-15204, UL Recognized Component | Gray | __ | 0000000 | 00000 |
| __ | 4 fl. oz. | Brush-Top Can | 5,000 | 2,600 | Not Rated | 400° | 6" | Paste | __ | Gray | CO, CT, DC, DE, IL, IN, MA, MD, ME, MI, NH, NJ, NY, OH, PA, RI, UT, Northern VA | 00000000 | 00000 |
| __ | 4 fl. oz. | Brush-Top Can | 6,000 | 3,000 | -100° | 600° | 2" | Paste | NSF/ANSI 61 | Blue | __ | 00000000 | 00000 |
| __ | 8 fl. oz. | Brush-Top Can | 6,000 | 3,000 | -100° | 600° | 2" | Paste | NSF/ANSI 61 | Blue | __ | 000000 | 00000 |
| __ | 8 fl. oz. | Brush-Top Can | 10,000 | 300 | -65° | 450° | 2" | Paste | MIL-S-15204, UL Recognized Component | Gray | __ | 0000000 | 00000 |
| __ | 16 fl. oz. | Brush-Top Can | 6,000 | 3,000 | -100° | 600° | 2" | Paste | NSF/ANSI 61 | Blue | __ | 00000000 | 00000 |
| __ | 32 fl. oz. | Brush-Top Can | 6,000 | 3,000 | -100° | 600° | 2" | Paste | NSF/ANSI 61 | Blue | __ | 00000000 | 00000 |
Reusable Non-Hardening Thread Sealants for Coarse Threads
Much thicker than sealants for fine threads, these sealants bridge the gaps between coarse threads. Threads coated with these sealants can be installed multiple times without recoating. They have low locking strength, so they prevent threads from loosening due to vibration and can be adjusted without tools. They meet NSF/ANSI 61 for use with drinking water.
Reusable Non-Hardening Thread Sealants for Fine Threads
Formulated to flow into small spaces, use these sealants between fine threads. Threads coated with these sealants can be installed multiple times without recoating. They have low locking strength, so they prevent threads from loosening due to vibration and can be adjusted without tools. They meet NSF/ANSI 61 for use with drinking water.
Drip-Free Non-Hardening Thread Sealants
Apply this thread sealant stick without a mess. Often used in high-vibration applications that could cause standard thread sealants to fail, this sealant never fully hardens and remains pliable enough to self-heal and stop leaks before they start. It has low locking strength, so it can be adjusted without tools.
Container | Max. Pressure, psi | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Net Weight, oz. | Type | For Fluids | For Gases | Temp. Range, °F | For Max. Thread Dia. | Consistency | Color | Each | |
Low Locking Strength | |||||||||
| 1.3 | Stick | 500 | 300 | -50° to 250° | 2" | Semi-Solid | Off-White | 0000000 | 00000 |
Thread Sealants
These thread sealants are anaerobic, so they don’t begin to harden until coated surfaces are threaded together, blocking exposure to air.
Sealants with low locking strength prevent threads from loosening due to vibration and can be adjusted without tools. Those that are VOC-free won’t harm the environment and comply with LEED Green Building standards. VOC stands for volatile organic compound.
Sealants with medium locking strength prevent threads from loosening due to vibration and shock. They require a hand tool to unthread.
To adhere to safety standards for drinking water systems, use sealants that meet NSF/ANSI 61.
Container | Max. Pressure, psi | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | For Fluids | For Gases | Temp. Range, °F | For Max. Thread Dia. | Consistency | Specifications Met | Features | Color | Each | |
Low Locking Strength | |||||||||||||
Sealants | |||||||||||||
| 8 | Brush-Top Can | 1 sec. | 1 sec. | 500 | 350 | -50° to 350° | 6" | Paste | __ | VOC Free | Gray | 000000000 | 000000 |
Medium Locking Strength | |||||||||||||
Sealants | |||||||||||||
| 1.7 | Tube | 10 min. | 24 hrs. | 10,000 | 300 | -65° to 400° | 2" | Paste | MIL-S-15204, NSF/ANSI 61, UL Listed | __ | White | 00000000 | 00000 |
| 8.4 | Tube | 10 min. | 24 hrs. | 10,000 | 300 | -65° to 400° | 2" | Paste | MIL-S-15204, NSF/ANSI 61, UL Listed | __ | White | 00000000 | 00000 |
Thread Sealants for Hydraulic and Compressed Air Systems
Formulated for high lubricity, these sealants allow easy assembly of finely threaded hydraulic and compressed air system components. They're also free of fillers that could contaminate system media. These sealants are anaerobic, so they don’t begin to harden until coated surfaces are threaded together, blocking exposure to air. VOC (Volatile Organic Compounds) regulations restrict sales to the listed jurisdictions/areas.
These sealants have medium locking strength, which prevents threads from loosening due to vibration and shock. They require a hand tool to unthread.
Container | Max. Pressure, psi | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | For Fluids | For Gases | Temp. Range, °F | For Max. Thread Dia. | Consistency | Specifications Met | Color | Cannot Be Sold To | Each | |
Vibra-Tite Sealants | ||||||||||||||
| 440 | 0.3 | Bottle | 4 hrs. | 24 hrs. | 10,000 | 10,000 | -65° to 300° | 2" | Thick Liquid | __ | Purple | __ | 000000000 | 00000 |
| 440 | 1.7 | Bottle | 4 hrs. | 24 hrs. | 10,000 | 10,000 | -65° to 300° | 2" | Thick Liquid | __ | Purple | __ | 000000000 | 00000 |
| 440 | 8.4 | Bottle | 4 hrs. | 24 hrs. | 10,000 | 10,000 | -65° to 300° | 2" | Thick Liquid | __ | Purple | __ | 000000000 | 00000 |
| 442 | 1.7 | Tube | 60 min. | 24 hrs. | 10,000 | 10,000 | -65° to 300° | 2" | Thick Liquid | __ | Purple | __ | 000000000 | 00000 |
| 442 | 8.4 | Tube | 60 min. | 24 hrs. | 10,000 | 10,000 | -65° to 300° | 2" | Thick Liquid | __ | Purple | __ | 000000000 | 00000 |
| 444 | 0.3 | Bottle | 60 min. | 24 hrs. | 10,000 | 10,000 | -65° to 300° | 2" | Thin Liquid | __ | Brown | __ | 000000000 | 0000 |
| 444 | 1.7 | Bottle | 60 min. | 24 hrs. | 10,000 | 10,000 | -65° to 300° | 2" | Thin Liquid | __ | Brown | __ | 000000000 | 00000 |
| 444 | 8.4 | Bottle | 60 min. | 24 hrs. | 10,000 | 10,000 | -65° to 300° | 2" | Thin Liquid | __ | Brown | __ | 000000000 | 00000 |
Sealants | ||||||||||||||
| __ | 1.7 | Bottle | 6 hrs. | 24 hrs. | 10,000 | 300 | -65° to 300° | 2" | Thin Liquid | ASTM D5363, MIL-S-22473 Grade JV | Yellow | CO, CT, DC, DE, IL, IN, MA, MD, ME, MI, NH, NJ, Northern VA, NY, OH, PA, RI, UT | 00000000 | 00000 |
| __ | 1.7 | Tube | 60 min. | 24 hrs. | 10,000 | 300 | -65° to 400° | 2" | Paste | MIL-S-15204, UL Listed | White | __ | 00000000 | 00000 |
| __ | 8.4 | Tube | 60 min. | 24 hrs. | 10,000 | 300 | -65° to 400° | 2" | Paste | MIL-S-15204, UL Listed | White | __ | 00000000 | 00000 |
High-Temperature Thread Sealants
These sealants have high locking strength, so they work in demanding applications, such as securing mounting studs in motor housings. They also withstand applications with large temperature swings.
Heat cure sealant requires heat of at least 212° F to harden. Above 300° F, the sealant hardens in about 15 minutes. For temperatures below 300° F, it may take up to 4 hours to harden. It requires both heat and a hand tool to unthread.
1500° F max. temp. sealants are for use on cement-lined pipe joints prior to welding. The heat from the welding torch helps them begin to harden.
Sealants that cannot be sold to the listed regions are restricted due to VOC (Volatile Organic Compounds) regulations.
Container | Max. Pressure, psi | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | For Fluids | For Gases | Temp. Range, °F | For Max. Thread Dia. | Consistency | Specifications Met | For Use On | Color | Each | |
Medium Locking Strength | ||||||||||||||
Heat Cure Loctite® Sealants | ||||||||||||||
| 5540 | 16 | Can | 10 sec. | 12 hrs. | 2,900 | 2,900 | -40° to 1300° | 4" | Thin Liquid | MIL-S-15204 | Aluminum, Brass, Bronze, Iron, Stainless Steel, Steel, Titanium, Cast Iron, Galvanized Iron, Galvanized Steel, Metal, Tin, Pipe, Concrete | Brown | 00000000 | 0000000 |
| 5550 | 32 | Can | 10 sec. | 2 hrs. | 5,000 | 5,000 | -40° to 1500° | 6" | Paste | MIL-S-15204 | Aluminum, Brass, Bronze, Iron, Stainless Steel, Steel, Titanium, Cast Iron, Galvanized Iron, Galvanized Steel, Metal, Tin, Concrete | Brown | 00000000 | 000000 |
Non-Hardening High-Temperature Thread Sealants
Often used in high-vibration applications that could cause standard thread sealants to fail, these never fully harden and remain pliable enough to self-heal and stop leaks before they start. They have low locking strength, so they can be adjusted without tools.
Container | Max. Pressue, psi | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Size, fl. oz. | Net Weight, lbs. | Type | For Fluids | For Gases | Temp. Range, °F | For Max. Thread Dia. | Consistency | Color | Each | |
Low Locking Strength | ||||||||||
Key Graphite Sealants | ||||||||||
| __ | 0.625 | Brush-Top Can | 15,000 | 15,000 | -30° to 750° | 4" | Paste | Black | 000000 | 000000 |
| __ | 1 | Can | 15,000 | 15,000 | -30° to 750° | 4" | Paste | Black | 000000 | 00000 |
| __ | 2.75 | Can | 15,000 | 15,000 | -30° to 750° | 4" | Paste | Black | 000000 | 00000 |
| __ | 10 | Can | 15,000 | 15,000 | -30° to 750° | 4" | Paste | Black | 000000 | 000000 |
Sealants | ||||||||||
| 4.4 | __ | Tube | 2,300 | 2,300 | Not Rated to 1100° | 2" | Paste | Black | 000000 | 00000 |
Thread Sealants for Oxygen Systems
Completely free of oil and chemically inert, these sealants are safe to use with wet and dry oxygen systems. They contain PTFE, which provides a slippery surface that keeps threads from binding. These sealants are non-hardening, remaining pliable enough to self-heal and stop leaks before they start, so they’re often used in high-vibration applications that could cause standard thread sealants to fail. Since they have low locking strength, these sealants can be adjusted without tools.
The sealant in a tube is a good alternative to thread sealant tape—like tape, it forms PTFE strings between tightened threads, but excess material liquefies, so it won’t clog system components downstream.
High-Density Thread Sealant Tape
This tape has a higher density than standard tape for a better seal between threads. Made of PTFE, it has a slippery surface that keeps threads from binding to make parts easy to assemble.
Max. Pressure, psi | Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Lg., yd. | Density, g/cm3 | For Fluids | For Gases | Temp. Range, °F | For Max. Thread Dia. | Specifications Met | Color | 1-11 | 12-Up | |
PTFE | |||||||||||
0.0032" Thick. | |||||||||||
| 1/4" | 14 | 1.2 | 10,000 | 10,000 | -450° to 550° | 1/2" | MIL-T-27730 FDA Compliant 21 CFR 177.1550 UL Listed C-UL Listed MIL-A-A-58092 Type II | White | 0000000 | 00000 | 00000 |
| 3/8" | 14 | 1.2 | 10,000 | 10,000 | -450° to 550° | 3/4" | MIL-T-27730 FDA Compliant 21 CFR 177.1550 UL Listed C-UL Listed MIL-A-A-58092 Type II | White | 0000000 | 0000 | 0000 |
| 1/2" | 14 | 1.2 | 10,000 | 10,000 | -450° to 550° | 1" | MIL-T-27730 FDA Compliant 21 CFR 177.1550 UL Listed C-UL Listed MIL-A-A-58092 Type II | White | 0000000 | 0000 | 0000 |
| 3/4" | 14 | 1.2 | 10,000 | 10,000 | -450° to 550° | 1 1/2" | MIL-T-27730 FDA Compliant 21 CFR 177.1550 UL Listed C-UL Listed MIL-A-A-58092 Type II | White | 0000000 | 0000 | 0000 |
| 1" | 14 | 1.2 | 10,000 | 10,000 | -450° to 550° | 2" | MIL-T-27730 FDA Compliant 21 CFR 177.1550 UL Listed C-UL Listed MIL-A-A-58092 Type II | White | 0000000 | 00000 | 0000 |
| 1 1/2" | 14 | 1.2 | 10,000 | 10,000 | -450° to 550° | 3" | MIL-T-27730 FDA Compliant 21 CFR 177.1550 UL Listed C-UL Listed MIL-A-A-58092 Type II | White | 0000000 | 00000 | 00000 |
| 2" | 14 | 1.2 | 10,000 | 10,000 | -450° to 550° | 4" | MIL-T-27730 FDA Compliant 21 CFR 177.1550 UL Listed C-UL Listed MIL-A-A-58092 Type II | White | 0000000 | 00000 | 00000 |
0.0035" Thick. | |||||||||||
| 1/4" | 14 | 1.9 | 10,000 | 10,800 | -450° to 550° | 6" | MIL-T-27730 FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 UL Listed MIL-A-A-58092 Type II | White | 0000000 | 00000 | 0000 |
| 3/8" | 14 | 1.9 | 10,000 | 10,800 | -450° to 550° | 6" | MIL-T-27730 FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 UL Listed MIL-A-A-58092 Type II | White | 0000000 | 00000 | 00000 |
| 1/2" | 14 | 1.9 | 10,000 | 10,800 | -450° to 550° | 6" | MIL-T-27730 FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 UL Listed MIL-A-A-58092 Type II | White | 0000000 | 00000 | 00000 |
| 3/4" | 14 | 1.9 | 10,000 | 10,800 | -450° to 550° | 6" | MIL-T-27730 FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 UL Listed MIL-A-A-58092 Type II | White | 0000000 | 00000 | 00000 |
| 1" | 14 | 1.9 | 10,000 | 10,800 | -450° to 550° | 6" | MIL-T-27730 FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 UL Listed MIL-A-A-58092 Type II | White | 0000000 | 00000 | 00000 |
| 1 1/2" | 14 | 1.9 | 10,000 | 10,800 | -450° to 550° | 6" | MIL-T-27730 FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 UL Listed MIL-A-A-58092 Type II | White | 0000000 | 00000 | 00000 |
| 2" | 14 | 1.9 | 10,000 | 10,800 | -450° to 550° | 6" | MIL-T-27730 FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 UL Listed MIL-A-A-58092 Type II | White | 0000000 | 00000 | 00000 |
Max. Pressure, psi | Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Lg., yd. | Density, g/cm3 | For Fluids | For Gases | Temp. Range, °F | For Max. Thread Dia. | Specifications Met | Color | 1-11 | 12-Up | |
PTFE with Nickel Filler | |||||||||||
0.004" Thick. | |||||||||||
| 1/4" | 14 | 1.9 | 10,500 | 11,500 | -450° to 550° | 6" | FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 UL Listed | White | 0000000 | 000000 | 000000 |
| 3/8" | 14 | 1.9 | 10,500 | 11,500 | -450° to 550° | 6" | FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 UL Listed | White | 0000000 | 00000 | 00000 |
| 1/2" | 14 | 1.9 | 10,500 | 11,500 | -450° to 550° | 6" | FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 UL Listed | White | 0000000 | 00000 | 00000 |
| 3/4" | 14 | 1.9 | 10,500 | 11,500 | -450° to 550° | 6" | FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 UL Listed | White | 0000000 | 00000 | 00000 |
| 1" | 14 | 1.9 | 10,500 | 11,500 | -450° to 550° | 6" | FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 UL Listed | White | 0000000 | 00000 | 00000 |
| 2" | 14 | 1.9 | 10,500 | 11,500 | -450° to 550° | 6" | FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 UL Listed | White | 0000000 | 00000 | 00000 |
Thread Sealant Tape
Made of PTFE, this tape has a slippery surface that keeps threads from binding to make parts easy to assemble.
PTFE tape with graphite creates a better seal between threads than plain PTFE tape, which helps prevent fluid and gas leaks. The graphite attaches to the PTFE, so this tape does not emit harmful VOCs.
Max. Pressure, psi | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Wd. | Lg., yd. | For Fluids | For Gases | Temp. Range, °F | For Max. Thread Dia. | Color | Each | |
3M PTFE | |||||||||
0.003" Thick. | |||||||||
| 547 | 3/8" | 36 | Not Rated | Not Rated | -40° to 170° | 6" | White | 0000000 | 000000 |
Max. Pressure, psi | Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Lg., yd. | Density, g/cm3 | For Fluids | For Gases | Temp. Range, °F | For Max. Thread Dia. | Specifications Met | Color | 1-11 | 12-Up | |
PTFE | |||||||||||
0.0032" Thick. | |||||||||||
| 1/4" | 14 | 0.7 | 10,000 | 10,000 | -450° to 550° | 1/2" | FDA Compliant 21 CFR 177.1550, MIL-T-27730, UL Listed | White | 0000000 | 00000 | 00000 |
| 3/8" | 14 | 0.7 | 10,000 | 10,000 | -450° to 550° | 3/4" | FDA Compliant 21 CFR 177.1550, MIL-T-27730, UL Listed | White | 0000000 | 0000 | 0000 |
| 1/2" | 14 | 0.7 | 10,000 | 10,000 | -450° to 550° | 1" | FDA Compliant 21 CFR 177.1550, MIL-T-27730, UL Listed | White | 0000000 | 0000 | 0000 |
| 3/4" | 14 | 0.7 | 10,000 | 10,000 | -450° to 550° | 1 1/2" | FDA Compliant 21 CFR 177.1550, MIL-T-27730, UL Listed | White | 0000000 | 0000 | 0000 |
| 1" | 14 | 0.7 | 10,000 | 10,000 | -450° to 550° | 2" | FDA Compliant 21 CFR 177.1550, MIL-T-27730, UL Listed | White | 0000000 | 0000 | 0000 |
| 1 1/2" | 14 | 0.7 | 10,000 | 10,000 | -450° to 550° | 3" | FDA Compliant 21 CFR 177.1550, MIL-T-27730, UL Listed | White | 0000000 | 0000 | 0000 |
| 2" | 14 | 0.7 | 10,000 | 10,000 | -450° to 550° | 4" | FDA Compliant 21 CFR 177.1550, MIL-T-27730, UL Listed | White | 0000000 | 00000 | 00000 |
0.0035" Thick. | |||||||||||
| 1/2" | 39 | 0.8 | 10,000 | 10,000 | -450° to 500° | 2" | UL Listed, C-UL Listed | Blue | 0000000 | 0000 | 00 |
| 3/4" | 39 | 0.8 | 10,000 | 10,000 | -450° to 500° | 2" | UL Listed, C-UL Listed | Blue | 0000000 | 0000 | 00 |
| 1" | 39 | 0.8 | 10,000 | 10,000 | -450° to 500° | 2" | UL Listed, C-UL Listed | Blue | 0000000 | 00000 | 00 |
| 2" | 39 | 0.8 | 10,000 | 10,000 | -450° to 500° | 2" | UL Listed, C-UL Listed | Blue | 0000000 | 00000 | 00 |
Max. Pressure, psi | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Wd. | Lg., yd. | Density, g/cm3 | For Fluids | For Gases | Temp. Range, °F | For Max. Thread Dia. | Color | Each | |
ePTFE with Graphite | |||||||||
0.002" Thick. | |||||||||
| 5/8" | 27 | 0.8 | 2,900 | 2,900 | -400° to 500° | 1 1/4" | Gray | 0000000 | 000000 |
Thread Sealant Tape for Stainless Steel Threads
This tape is thicker to prevent seizing and galling associated with stainless steel threaded connections. It’s also good for use with other metals. This tape has a higher density than standard tape for a better seal between threads. Made of PTFE, it has a slippery surface that keeps threads from binding to make parts easy to assemble.
Max. Pressure, psi | Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Lg., ft. | Density, g/cm3 | For Fluids | For Gases | Temp. Range, °F | For Max. Thread Dia. | Specifications Met | Color | 1-11 | 12-Up | |
PTFE | |||||||||||
0.0043" Thick. | |||||||||||
| 1/4" | 43 | 1.05 | 10,000 | 2,000 | -450° to 550° | 1 1/2" | MIL-T-27730 UL Listed | Gray | 0000000 | 00000 | 00000 |
| 3/8" | 43 | 1.05 | 10,000 | 2,000 | -450° to 550° | 1 1/2" | MIL-T-27730 UL Listed | Gray | 0000000 | 0000 | 0000 |
| 1/2" | 21 | 1.05 | 10,000 | 2,000 | -450° to 550° | 1 1/2" | MIL-T-27730 UL Listed | Gray | 0000000 | 0000 | 0000 |
| 1/2" | 50 | 1.05 | 10,000 | 2,000 | -450° to 550° | 1 1/2" | MIL-T-27730 UL Listed | Gray | 0000000 | 00000 | 00000 |
| 3/4" | 21 | 1.05 | 10,000 | 2,000 | -450° to 550° | 1 1/2" | MIL-T-27730 UL Listed | Gray | 0000000 | 0000 | 0000 |
| 1" | 21 | 1.05 | 10,000 | 2,000 | -450° to 550° | 1 1/2" | MIL-T-27730 UL Listed | Gray | 0000000 | 0000 | 0000 |
| 1" | 43 | 1.05 | 10,000 | 2,000 | -450° to 550° | 1 1/2" | MIL-T-27730 UL Listed | Gray | 0000000 | 00000 | 00000 |
| 1 1/2" | 43 | 1.05 | 10,000 | 2,000 | -450° to 550° | 1 1/2" | MIL-T-27730 UL Listed | Gray | 0000000 | 00000 | 00000 |
Thread Sealant Tape for Copper, Brass, and Bronze Threads
With 10% copper flake content, this tape matches the color of copper, brass, and bronze threads for a seamless finish. It’s made of PTFE, so it has a slippery surface to keep threads from binding. This tape has a higher density than standard tape for a better seal between threads.