Send temperature readings from tanks, containers, and pipes to devices such as remote displays and programmable logic controllers (PLCs) without the need for a separate thermocouple transmitter. Made of either stainless steel or nickel, the probe resists corroding in liquids and gases.

As the probe on these transmitters measures temperature, the included thermowell shields it from vibration, impacts, and shock. These transmitters convert readings to analog signals and send them to remote displays, programmable logic controllers (PLCs), and other devices.

For easy installation in thermowells, tanks, pipes, and other closed vessels, these probes have a male NPT fitting.

To prevent damage from vibration, impact, and shock, these probes come with a thermowell. It acts as a shield, allowing the probe to measure the temperature of liquids and gases without touching them.

To prevent wear and corrosion, an armored stainless steel cable protects the wiring that connects these probes to your temperature-monitoring device. The probes themselves are also made of stainless steel, so you don't have to worry about corrosion when you're measuring the temperature of liquids and gases.

Get the fast response times of a small-diameter probe without sacrificing durability. The thin tip reacts quickly to temperature changes while the rest of the probe is thick for strength.

An economical alternative to insulated thermocouple probes, these probes measure the temperature of liquids and gases.

Designed to measure temperature in dairy and food-processing applications, these probes are built to maintain sanitary standards.

Wrap these probes around pipe, hose, or other tubular shapes to measure surface temperature.

Take temperature readings in high-vibration environments.

Often used with thermocouple thermometers, these probes have a handle for a comfortable grip.

Keep an eye on the surface temperature of your equipment—these probes thread directly into a tapped hole for continuous monitoring.

Measure air and surface temperatures in corrosive environments—an armored stainless steel cable shields the wiring on these probes from wear, abrasion, and corrosion.

With a clip on the end, these probes are quick to install and easy to remove. They're often used on vents, circuit boards, and other irregular surfaces.

To shield the wiring from corrosion and wear in harsh environments, these probes have an armored stainless steel cable. Use their narrow tip to pierce pliable plastic, rubber, and other soft solids to check the internal temperature.

Take your tank’s internal temperature with these sensors that sit on the outside walls.