The barrel is longer than other lugs, so you can compress it twice for an extra-tight grip in high-vibration applications.

With a thicker tab and OD, these lugs are more durable and dissipate more heat from high electrical loads than standard compression lugs. They have a long barrel, so you can compress them twice for an extra-tight grip in high-vibration applications.

Solid pins make it easy to insert stranded wire into screw-clamp connections. The plastic cover on the barrel of these lugs provides electrical insulation to prevent short-circuiting with nearby wire.

Save space on your mounting surface by installing wire vertically.

To prevent short-circuiting with nearby wire, a plastic cover insulates the barrel on these lugs. Tighten the set screw for a secure connection without crimping.

Often used in tight spaces, these lugs allow wire to enter at several angles.

Mount these terminals on a threaded screw or stud for a more secure connection than spade and hook terminals. They are noninsulated, so you can easily inspect the wire connection.

A plastic cover on the barrel provides electrical insulation to prevent short-circuiting from nearby wire. These terminals have an elongated ring that can be mounted with a range of screw sizes.

Made of heat-resistant materials, these terminals are designed for installation in high-temperature applications such as motors, ovens, and furnaces. They are noninsulated, so you can easily inspect the wire connection.

With a thicker ring and a plastic cover on the barrel, these terminals are more durable than standard ring terminals and insulated to prevent short circuiting with nearby wire.

When heat is applied, the enclosed solder melts, creating the most secure and electrically conductive connection we offer. The plastic insulation also shrinks when heated, forming a seal to keep out water and contaminants.

The elongated ring can be mounted with a range of screw sizes.

A serrated edge on the inside of the ring grips the mounting screw for a secure hold.

Loosen your mounting screw to install—the open end eliminates the need to completely remove it. They are noninsulated, so you can easily inspect the wire connection.

Ready to install in panel boxes, switches, outlets, and other devices, these cords come with a spade terminal already attached to one end.

Keep on hand the set screw lugs, nuts, and bolts needed to install single- or three-phase dry-type transformers.

Keep on hand a variety of different sized terminals and splices with the most secure, sealed connection we offer.

For use where water and contaminants are a concern, the terminals and splices in these assortments have insulation that shrinks and creates a tight seal when heated.