We will reply to your message within an hour.
Use with DIN 3 rail. Add as many circuits as you need with these terminal blocks and accessories.
No need to tighten or loosen any screws—these terminals lock your wiring in place with spring clamps.
Visually confirm your circuits are working as expected. These terminal blocks have integrated LEDs that indicate if your circuits are powered or not, helping you troubleshoot issues.
One of the connections on these terminal blocks is a socket instead of a traditional terminal, making it easy to swap out equipment or change your wiring even in small enclosures. Instead of having to attach wire inside the tight space of your enclosure, you can wire a connector wherever it’s easiest and then plug it into the socket.
Quickly troubleshoot or change wiring without any tools. These terminal blocks have a lever clamp that you flip up to insert wiring and flip down to lock it in place.
Use with DIN 2 rail. Add as many circuits as you need with these terminal blocks and accessories.
Mount blocks to a panel or the surface of a machine. Also known as barrier terminal strips.
Customize these blocks’ wiring as your application changes. They come with jumpers that connect terminals on the same block, either across or next to one another.
Solder the pins on these blocks directly to your circuit board and connect the screw terminals to stripped wires, ring terminals, or spade terminals.
Secure wires to your circuit board without worrying about them vibrating loose or getting pulled out. Also known as Eurostyle terminal blocks, these blocks use screw-clamp terminals to clamp your wire in place.
Quickly disconnect these terminal blocks without having to remove any wires.
With the help of distribution blocks, you can take a high-current wire from your power source and connect it to one or more electrical devices.
Save preparation time—these cords are ready-to-use with ring terminals on each end of a single-conductor wire.
Ready to install in panel boxes, switches, outlets, and other devices, these cords come with a spade terminal already attached to one end.