These 18-8 stainless steel tee nut inserts have better corrosion resistance than zinc-plated steel tee nut inserts.

Fewer prongs than other tee nut inserts reduce the risk of splitting hardwood—these inserts have three short prongs.

A wide flange distributes the load over a large area. Hammer these inserts into a drilled hole.

Projections on the base concentrate the weld and create space for heat to dissipate, protecting the threads on these weld nuts from deforming. Made of 18-8 stainless steel, they withstand mild chemicals and can be used in wet and outdoor environments.

Projections on the base concentrate the weld and create space for heat to dissipate, protecting the threads on these steel weld nuts from deforming.

Install threads in channels and other tight spaces where round-base weld nuts won’t fit.

Slim at the base, these weld nuts fit in channels and other spaces too tight for round-base weld nuts. Weld them to stainless steel surfaces to add strong, permanent threads that resist corroding from chemicals.

An offset barrel allows you to position threads near edges and corners.

To protect their threads from deforming, these steel nuts have a projection that concentrates your weld and creates room for heat to dissipate. An offset barrel lets you position threads near the edges and corners of uncoated steel sheets.

Weld these nuts to stainless steel surfaces.

Add corrosion-resistant threads to stainless steel sheets, even in spaces with low clearance.

With three weld points, these hex weld nuts create a secure hold on steel surfaces.

Add strong threads to material that you can't drill or that's too thin to grip a threaded insert. These nuts are ideal for brittle plastics or tough composites, such as acrylic or carbon fiber.

Add corrosion-resistant threads to channels, corners, and other tight spaces without drilling a hole. Glue these nuts on to thin surfaces and materials too hard and brittle to drill, such as acrylic and carbon fiber.