Filter by
Tap and Drill Bit Sets
![]() | ![]() | ![]() |
Plastic Case | Metal Case | Plastic Pouch |
Drill and tap a variety of hole sizes. These taps and drill bits are for use on metal and plastic.
Uncoated Carbon Steel Tap—Uncoated carbon steel taps are for thread repair and occasional tapping.
Uncoated High-Speed Steel Tap—Uncoated high-speed steel taps have a longer tool life than carbon steel. They are strong enough for most jobs but don’t last as long as other high-speed steel taps. Use them for small-scale jobs.
Uncoated Cobalt Steel Tap—Uncoated cobalt steel taps have higher strength and wear resistance than carbon steel and high-speed steel taps.
Black-Oxide High-Speed Steel Tap—Black-oxide high-speed steel taps have a longer tool life than carbon steel. They cut with less friction than uncoated taps.
Titanium Nitride (TiN)-Coated High-Speed Steel Tap—Titanium nitride (TiN)-coated high-speed steel taps have a longer tool life than carbon steel. They resist heat and wear better than uncoated taps, letting them last up to twice as long.
Taper Chamfer—Taper-chamfer taps have 7-10 chamfered threads at the tip for cutting into the workpiece. They require less torque than other chamfer types, making them a good choice for starting threads and tapping through holes. However, a longer taper means that they cannot thread as close to the bottom of closed-end holes.
Plug Chamfer—Plug-chamfer taps are a versatile choice for most tapping applications. With 3-5 chamfered cutting threads, they require moderate torque and are often used for start-to-finish tapping of through holes and closed-end holes. However, they do not start threads as easily as taper chamfers. When using them to tap closed-end holes, be sure to leave sufficient space at the bottom for chips to accumulate.
Bottoming Chamfer—Bottoming-chamfer taps cut into the workpiece with just 1-2 chamfered threads. This short chamfer lets them thread holes closer to the bottom than other taps, but they require more torque to start threads.
Black-Oxide High-Speed Steel Drill Bit—Black-oxide high-speed steel drill bits have a longer tool life than carbon steel. They cut with less friction than uncoated drill bits.
Gold-Oxide High-Speed Steel Drill Bit—Gold-oxide high-speed steel drill bits have a longer tool life than carbon steel.
Titanium Nitride (TiN)-Coated High-Speed Steel Drill Bit—Titanium nitride (TiN)-coated high-speed steel drill bits have a longer tool life than carbon steel. They last longer and can drill at higher speeds than uncoated and oxide-coated drill bits.
Uncoated Cobalt Steel Drill Bit—Uncoated cobalt steel drill bits have higher strength and wear resistance than carbon steel and high-speed steel drill bits.
Uncoated High-Speed Steel Drill Bit—Uncoated high-speed steel drill bits have a longer tool life than carbon steel. They are strong enough for most jobs but don’t last as long as other high-speed steel drill bits. Use them for small-scale jobs.
No. of Pieces | Chamfer Type | Tap Sizes Included | Overall Lg. | Thread Type | No. of Flutes | Pitch Dia. Limit | Drill Bit Sizes Included | Drill Bit Material | Container Type | Includes | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Uncoated Carbon Steel Tap | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
13 | Plug | 1 each of sizes: 4-40 6-32 8-32 10-24 10-32 1/4"-20 | 2" 2 1/8" 2 9/32" 2 9/16" 2 39/64" | UNC, UNF | 3, 4 | H3 | 43 ga. 35 ga. 29 ga. 25 ga. 21 ga. 7 ga. | Black-Oxide High-Speed Steel | Plastic Case | Tap Wrench | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
29 | Taper, Plug, Bottoming | 3 each of sizes: M3 × 0.50 mm M4 × 0.70 mm M5 × 0.80 mm M6 × 1.00 mm M8 × 1.25 mm M10 × 1.50 mm M12 × 1.75 mm | 1 39/64" 1 27/32" 2 1/64" 2 3/32" 2 13/64" 2 3/4" 2 61/64" | Metric | 3, 4 | H6 | 2.5 mm 3.3 mm 4.2 mm 5.0 mm 6.8 mm 8.5 mm 10.2 mm | Black-Oxide High-Speed Steel | Metal Case | Tap Wrench | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Uncoated High-Speed Steel Tap | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
10 | Plug | 1 each of sizes: 1/4"-20 5/16"-18 3/8"-16 7/16"-14 1/2"-13 | 2 1/2" 2 23/32" 2 15/16" 3 5/32" 3 3/8" | UNC | 4 | Not Rated | 27/64" 5/16" 7 ga. F U | Black-Oxide High-Speed Steel | Plastic Pouch | — | 00000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
16 | Plug | 1 each of sizes: M3 × 0.50 mm M3.5 × 0.60 mm M4 × 0.70 mm M5 × 0.80 mm M6 × 1.00 mm M8 × 1.25 mm M10 × 1.50 mm M12 × 1.75 mm | 1 15/16" 2" 2 1/8" 2 3/8" 2 1/2" 2 3/4" 2 15/16" 3 3/8" | Metric | 3, 4 | D3, D4, D5, D6 | 2.5 mm 2.9 mm 3.3 mm 4.2 mm 5.0 mm 6.75 mm 8.5 mm 10.25 mm | Black-Oxide High-Speed Steel | Plastic Pouch | — | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
18 | Plug | 1 each of sizes: 6-32 8-32 10-24 10-32 1/4-20 5/16-18 3/8-16 7/16-14 1/2-13 | 2" 2 1/8" 2 3/8" 2 1/2" 2 23/32" 2 15/16" 3 5/32" 3 3/8" | UNC, UNF | 3, 4 | H3 | 27/64" 5/16" 36 ga. 29 ga. 25 ga. 21 ga. 7 ga. F U | Uncoated High-Speed Steel | Metal Case | — | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
18 | Plug | 1 each of sizes: 6-40 8-36 10-24 10-32 1/4-28 5/16-24 3/8-24 7/16-20 1/2-20 | 2" 2 1/8" 2 3/8" 2 1/2" 2 23/32" 2 15/16" 3 5/32" 3 3/8" | UNC, UNF | 3, 4 | H2, H3 | 29/64" 25/64" 33 ga. 29 ga. 25 ga. 21 ga. 3 ga. I Q | Uncoated High-Speed Steel | Metal Case | — | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
18 | Plug | 1 each of sizes: M2.5 × 0.45 mm M3 × 0.50 mm M3.5 × 0.60 mm M4 × 0.70 mm M5 × 0.80 mm M6 × 1.00 mm M8 × 1.25 mm M10 × 1.50 mm M12 × 1.75 mm | 1 3/4" 1 15/16" 2" 2 1/8" 2 3/8" 2 1/2" 2 23/32" 2 15/16" 3 3/8" | Metric | 3, 4 | D3, D4, D5, D6 | 2.05 mm 2.5 mm 2.9 mm 3.3 mm 4.2 mm 5.0 mm 6.7 mm 8.5 mm 10.2 mm | Uncoated High-Speed Steel | Metal Case | — | 00000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
29 | Taper, Plug, Bottoming | 3 each of sizes: M3 × 0.50 mm M4 × 0.70 mm M5 × 0.80 mm M6 × 1.00 mm M8 × 1.25 mm M10 × 1.50 mm M12 × 1.75 mm | 1 39/64" 1 27/32" 2 1/64" 2 3/32" 2 13/64" 2 3/4" 2 61/64" | Metric | 3, 4 | H6 | 2.5 mm 3.3 mm 4.2 mm 5.0 mm 6.8 mm 8.5 mm 10.2 mm | Black-Oxide High-Speed Steel | Metal Case | Tap Wrench | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Uncoated Cobalt Steel Tap | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
18 | Plug | 1 each of sizes: 6-32 8-32 10-24 10-32 1/4-20 5/16-18 3/8-16 7/16-14 1/2-13 | 2" 2 1/8" 2 3/8" 2 1/2" 2 23/32" 2 15/16" 3 5/32" 3 3/8" | UNC, UNF | 2, 3 | H3 | 27/64" 5/16" 36 ga. 29 ga. 25 ga. 21 ga. 7 ga. F U | Uncoated Cobalt Steel | Metal Case | — | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Black-Oxide High-Speed Steel Tap | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
18 | Plug | 1 each of sizes: 6-32 8-32 10-24 10-32 1/4-20 5/16-18 3/8-16 7/16-14 1/2-13 | 2" 2 1/8" 2 3/8" 2 1/2" 2 23/32" 2 15/16" 3 5/32" 3 3/8" | UNC, UNF | 3, 4 | H3 | 27/64" 5/16" 36 ga. 29 ga. 25 ga. 21 ga. 7 ga. F U | Black-Oxide High-Speed Steel, Gold-Oxide High-Speed Steel | Metal Case | — | 00000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Titanium Nitride (TiN)-Coated High-Speed Steel Tap | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
18 | Plug | 1 each of sizes: 6-32 8-32 10-24 10-32 1/4-20 5/16-18 3/8-16 7/16-14 1/2-13 | 2" 2 1/8" 2 3/8" 2 1/2" 2 23/32" 2 15/16" 3 5/32" 3 3/8" | UNC, UNF | 3, 4 | H3 | 27/64" 5/16" 36 ga. 29 ga. 25 ga. 21 ga. 7 ga. F U | Titanium Nitride (TiN)-Coated High-Speed Steel | Metal Case | — | 00000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Chip-Clearing Tap and Drill Bit Sets for Through Holes
![]() |
Also known as gun taps, the taps in these sets have spiral-point flutes that push chips ahead of the tap and out of through holes. Because they don't need to be reversed to prevent buildup, they produce threads more efficiently than standard taps and are suitable for production work. Taps have a square shank for compatibility with tap wrenches and tap holders for drill presses and milling machines. With a plug chamfer, they have 3-5 chamfered cutting threads, so they're suitable for start-to-finish tapping. All taps and drill bits are made of high-speed steel for use on most metal and plastic.
No. of Pieces | Chamfer Type | Tap Sizes Included | Overall Lg. | Thread Type | No. of Flutes | Pitch Dia. Limit | Drill Bit Sizes Included | Drill Bit Material | Container Type | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Uncoated High-Speed Steel Tap | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
18 | Plug | 6-32 8-32 10-24 10-32 1/4"-20 5/16"-18 3/8"-16 7/16"-14 1/2"-13 | 2" 2 1/8" 2 3/8" 2 1/2" 2 23/32" 2 15/16" 3 5/32" 3 3/8" | UNC, UNF | 2, 3 | H3 | 27/64" 5/16" 36 ga. 29 ga. 25 ga. 21 ga. 7 ga. F U | Black-Oxide High-Speed Steel | Metal Case | 00000000 | 0000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Gold-Oxide High-Speed Steel Tap | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
18 | Plug | 6-40 8-36 10-24 10-32 1/4"-28 5/16"-24 3/8"-24 7/16"-20 1/2"-20 | 2 1/16" 2 7/32" 2 15/32" 2 5/8" 2 7/8" 3 1/8" 3 5/32" 3 3/8" | UNF | 2, 3 | H2, H3 | 29/64" 25/64" 33 ga. 29 ga. 25 ga. 21 ga. 3 ga. I Q | Gold-Oxide High-Speed Steel | Metal Case | 00000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
18 | Plug | M2.5 × 0.45 mm M3 × 0.5 mm M3.5 × 0.6 mm M4 × 0.7 mm M5 × 0.8 mm M6 × 1.00 mm M8 × 1.25 mm M10 × 1.5 mm M12 × 1.75 mm | 1 13/16" 1 15/16" 2" 2 1/8" 2 3/8" 2 1/2" 2 23/32" 2 15/16" 3 3/8" | Metric | 2, 3 | D3, D4, D5, D6 | 2.05 mm 2.5 mm 2.9 mm 3.3 mm 4.2 mm 5 mm 6.7 mm 8.5 mm 10.2 mm | Gold-Oxide High-Speed Steel | Metal Case | 00000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Hex-Shank Tap and Drill Bit Sets
![]() |
Drill and tap a variety of hole sizes. These taps and drill bits are for use on metal and plastic.
Uncoated High-Speed Steel Tap—Uncoated high-speed steel taps have a longer tool life than carbon steel. They are strong enough for most jobs but don’t last as long as other high-speed steel taps. Use them for small-scale jobs.
Plug Chamfer—Plug-chamfer taps are a versatile choice for most tapping applications. With 3-5 chamfered cutting threads, they require moderate torque and are often used for start-to-finish tapping of through holes and closed-end holes. However, they do not start threads as easily as taper chamfers. When using them to tap closed-end holes, be sure to leave sufficient space at the bottom for chips to accumulate.
Black-Oxide High-Speed Steel Drill Bit—Black-oxide high-speed steel drill bits have a longer tool life than carbon steel. They cut with less friction than uncoated drill bits.
No. of Pieces | Chamfer Type | Tap Sizes Included | Overall Lg. | Thread Type | No. of Flutes | Pitch Dia. Limit | Drill Bit Sizes Included | Drill Bit Material | Container Type | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Uncoated High-Speed Steel Tap | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
36 | Plug | 1 each of sizes: 6-32 6-40 8-32 8-36 10-24 10-32 12-24 12-28 1/4"-20 1/4"-28 5/16"-18 5/16"-24 3/8"-24 3/8"-16 7/16"-14 7/16"-20 1/2"-13 1/2"-20 | 2" 2 1/8" 2 5/32" 2 11/64" 2 3/8" 2 1/2" 2 15/16" 3 5/32" 3 7/32" | UNC, UNF | 3, 4 | H2, H3 | 1 each of sizes: 25/64" 27/64" 29/64" 5/16" 36 ga. 33 ga. 25 ga. 21 ga. 16 ga. 15 ga. 7 ga. 3 ga. F I Q U 2 each of sizes: 29 ga. | Black-Oxide High-Speed Steel | Metal Case | 0000000 | 0000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Hex-Shank Tap and Drill Bit Sets for Drills and Powered Screwdrivers
![]() |
All taps and drill bits have a hex shank for direct connection to tools such as drills and power screwdrivers. They're made of high-speed steel and are for use on most metal and plastic. Taps have a plug chamfer with 3-5 chamfered cutting threads, so they're suitable for start-to-finish tapping, but they’ll need space at the bottom of closed-end holes for chips to accumulate.
No. of Pieces | Chamfer Type | Tap Sizes Included | Overall Lg. | Thread Type | No. of Flutes | Drill Bit Sizes Included | Drill Bit Material | Container Type | Includes | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Uncoated High-Speed Steel Tap | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
13 | Plug | M3 × 0.5 mm M4 × 0.7 mm M5 × 0.8 mm M6 × 1.0 mm M8 × 1.25 mm M10 × 1.5 mm | 1 19/64" 1 27/64" 1 35/64" 1 37/64" | Metric | 3, 4 | 2.5 mm 3.3 mm 4.2 mm 5.0 mm 6.8 mm 8.5 mm | Uncoated High-Speed Steel | Plastic Case | Chuck | 0000000 | 0000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Tap, Die, and Drill Bit Sets
![]() |
Cut and repair threads and drill holes in many different sizes. Tap and die wrenches are included. The dies are hex shaped for use with conventional wrenches. The taps are made of carbon steel and are recommended for thread repair and occasional tapping.
Taper Chamfer—Taper chamfer taps have 7-10 chamfered threads at the tip for cutting into the workpiece. They require less torque than other chamfer types, making them a good choice for starting threads and tapping through holes. However, a longer taper means that they cannot thread as close to the bottom of closed-end holes.
Plug Chamfer—Plug chamfer taps are a versatile choice for most tapping applications. With 3-5 chamfered cutting threads, they require moderate torque and are often used for start-to-finish tapping of through holes and closed-end holes. However, they do not start threads as easily as taper chamfers. When using them to tap closed-end holes, be sure to leave sufficient space at the bottom for chips to accumulate.
No. of Pieces | Tap Sizes Included | Die Sizes Included | Drill Bit Sizes Included | Container Type | Includes | Tap Chamfer Type | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Carbon Steel | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Right-Hand Thread | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
117 | 4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/8"-28, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm | 4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/8"-28, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm | 5/64", 7/64", 5/32", 1/4", 19/64", 5/16", 21/64", 3/8", 25/64", 13/32", 27/64", 29/64", 43 ga., 39 ga., 36 ga., 30 ga., 29 ga., 25 ga., 21 ga., 20 ga., 16 ga., 9 ga., 7 ga., 3 ga., B, F, H, I, J, O, Q, R, S, U, Z | Plastic Case | Die Wrench (2), Extractor (5), Tap Wrench (3), Thread Gauge (2) | Taper, Plug | 00000000 | 0000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||