McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    69 Products

    Tap Guides

    Image of Product. Front orientation. Tap Guides.
    Place on your workpiece to ensure straight, accurate threading without building a fixture.
    For Tap Size
    For Tap Type
    For Thread
    Type
    Lg.
    Wd.
    Ht.
    Material
    Each
    No. 0, No. 1, No. 2, No. 3, No. 4, No. 5, No. 6, No. 8, No. 10, 1/4", 5/16", 3/8", 7/16", 1/2", 5/8"Standard (UN)UN
    		4 5/8"1"7/8"Steel0000000000000
    No. 6, No. 8, No. 10, No. 12, 1/4", 5/16", 3/8", 7/16", 1/2", 9/16"HelicalUNC
    		4 3/4"1 1/8"7/8"Steel000000000000
    No. 8, No. 10, 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8"HelicalUNF
    		5"1 1/8"7/8"Steel000000000000
    M1.6, M2, M2.5, M3, M3.5, M4, M5, M6, M8, M10, M12, M14, M16MetricMetric
    		4 5/8"1"7/8"Steel000000000000

    T-Handle Tap Wrenches

    Use with a tap to thread holes by hand. These wrenches are more compact than straight-handle tap wrenches, so they can be used to tap in tighter spaces. However, they provide less leverage.
    Tap Wrenches
    Image of Product. Top orientation. Tap Wrenches. T-Handle Tap Wrenches.
    Sliding Ratcheting Handle—Sliding ratcheting handle moves from side to side and can lock in a fixed position. It adjusts for right- or left-hand ratcheting.
    Tap Wrenches
    Tap Wrench
    Jaws Sets
    For Tap Size
    For Tap Pipe
    Size
    For Square
    Shank Size
    Lg.
    Material
    Each
    Each
    Fixed Handle
    No. 0, No. 1, No. 2, No. 3, No. 4, No. 5, No. 6, No. 8, No. 10, No. 12, 3/16", 7/32", 1/4", M1.6, M1.8, M2, M2.2, M2.5, M3, M3.5, M4, M4.5, M5, M6, M6.3—0.11" to 0.191"3 1/2"Steel0000000000000———0
    No. 0, No. 1, No. 2, No. 3, No. 4, No. 5, No. 6, No. 8, No. 10, No. 12, 3/16", 7/32", 1/4", M1.6, M1.8, M2, M2.2, M2.5, M3, M3.5, M4, M4.5, M5, M6, M6.3—0.11" to 0.191"9"Steel000000000000———0
    1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", M6, M6.3, M7, M8, M9, M10, M11, M12, M12.51/16, 1/80.191" to 0.275"4"Steel000000000000———0
    1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", M6, M6.3, M7, M8, M9, M10, M11, M12, M12.51/16, 1/80.191" to 0.275"11"Steel000000000000———0
    1/2", 9/16", 5/8", 11/16", 3/4", M13, M14, M15, M16, M17, M18, M19, M20—0.275" to 0.442"4"Steel000000000000———0
     
    Sliding Handle
    No. 0, No. 1, No. 2, No. 3, No. 4, No. 5, No. 6, No. 8, No. 10, No. 12, 1/4", M1.6, M2, M2.5, M3, M3.5, M4, M4.5, M5, M6—0.11" to 0.191"3 1/2"Steel000000000000———0
    No. 0, No. 1, No. 2, No. 3, No. 4, No. 5, No. 6, No. 8, No. 10, No. 12, 1/4", M1.6, M2, M2.5, M3, M3.5, M4, M4.5, M5, M6—0.11" to 0.191"9"Steel000000000000———0
    1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", M6, M6.3, M7, M8, M9, M10, M11, M12, M12.51/16, 1/80.191" to 0.275"4"Steel000000000000———0
    1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", M6, M6.3, M7, M8, M9, M10, M11, M12, M12.51/16, 1/80.191" to 0.275"11"Steel000000000000———0
     
    Sliding Ratcheting Handle
    No. 0, No. 1, No. 2, No. 3, No. 4, No. 5, No. 6, No. 8, No. 10, No. 12, 3/16", 7/32", 1/4", M1.6, M1.8, M2, M2.2, M2.5, M3, M3.5, M4, M4.5, M5, M6, M6.3—0.078" to 0.203"3 1/2"Steel0000000000000000000000000
    No. 0, No. 1, No. 2, No. 3, No. 4, No. 5, No. 6, No. 8, No. 10, No. 12, 3/16", 7/32", 1/4", M1.6, M1.8, M2, M2.2, M2.5, M3, M3.5, M4, M4.5, M5, M6, M6.3—0.078" to 0.203"10"Steel000000000000000000000000
    1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", M6, M6.3, M7, M8, M9, M10, M11, M12, M12.5—0.188" to 0.313"12"Steel000000000000000000000
    1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", M6, M6.3, M7, M8, M9, M10, M11, M12, M12.51/16, 1/80.188" to 0.313"4 1/4"Steel000000000000000000000
    1/2", 9/16", 5/8", 11/16", 3/4", M13, M14, M15, M16, M17, M18, M19, M20—0.344" to 0.5"4 1/2"Steel00000000000000000000000
     
    Tap Wrenches with Aligner
    Image of Product. Front orientation. Contains Annotated. Tap Wrenches with Aligner. T-Handle Tap Wrenches.
    Wrenches with aligner square your tap to your work surface for proper alignment and reduced tap breakage. A V-groove at the base provides stability on round surfaces.
    Tap Wrenches
    Tap Wrench
    Jaws Sets
    For Tap Size
    For Square
    Shank Size
    Lg.
    Includes
    Material
    Each
    Each
    Sliding Handle
    No. 0, No. 1, No. 2, No. 3, No. 4, No. 5, No. 6, No. 8, No. 10, No. 12, 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", M1.6, M1.8, M2, M2.2, M2.5, M3, M3.5, M4, M4.5, M5, M6, M6.3, M7, M8, M9, M10, M11, M12, M12.50.11" to 0.275"4 1/4"AlignerSteel00000000000000000000000000
     
    Machine-Mount Tap Wrenches
    Image of Product. Front orientation. Contains Annotated. Machine-Mount Tap Wrenches. T-Handle Tap Wrenches.
    Machine-mount wrenches have a guide shank that fits into the chuck on your drill press and holds the tap steady. Use them after drilling to thread holes manually without moving the workpiece.
    Sliding Handle—Sliding handle moves from side to side to allow tapping in spaces where fixed handles don't have room to turn.
    For Tap Size
    For Tap Pipe
    Size
    For Square
    Shank Size
    Lg.
    Includes
    Material
    Each
    Sliding Handle
    No. 0, No. 1, No. 2, No. 3, No. 4, No. 5, No. 6, No. 8, No. 10, No. 12, 1/4", M1.6, M2, M2.5, M3, M3.5, M4, M4.5, M5, M6—0.11" to 0.191"4 1/2"Guide with 1/2" dia. shankSteel0000000000000
    1/4", 5/16", 3/8", 7/16", 1/2", M6, M7, M8, M10, M121/16, 1/80.191" to 0.275"5 1/8"Guide with 1/2" dia. shankSteel000000000000
    1/2", 9/16", 5/8", 11/16", 3/4", M12, M12.5, M14, M15, M16, M18, M191/16, 1/80.275" to 0.442"5 1/4"Guide with 5/8" dia. shankSteel000000000000
    3/4", 13/16", 7/8", 15/16", 1", M19, M20, M22, M22.5, M24, M251/4
    		0.442" to 0.6"5 1/2"Guide with 3/4" dia. shankSteel0000000000000
     

    Starrett T-Handle Tap Wrenches

    Image of Product. Front orientation. Tap Wrenches. Starrett T-Handle Tap Wrenches.
    With a T-handle design, these wrenches are more compact than straight-handle tap wrenches but provide less leverage. The handle slides from side to side to allow tapping in spaces where fixed handles don't have room to turn.
    Mfr. Model
    No.
    For Tap Size
    For Tap Pipe
    Size
    For Square
    Shank Size
    Lg.
    Material
    Each
    Sliding Handle
    93A1/16", 1/8", 3/16", M1.6, M1.8, M2, M2.2, M2.5, M3, M3.5, M4, M4.5—0.063" to 0.156"2"Steel000000000000000
    93B7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", M5.5, M6, M6.3, M7, M8, M9, M10, M11—0.156" to 0.25"2 1/2"Steel00000000000000
    93C1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", M6, M6.3, M7, M8, M9, M10, M11, M12, M12.51/16, 1/80.188" to 0.313"3 1/2"Steel00000000000000
     

    Economy T-Handle Tap Wrenches

    Image of Product. Front orientation. Tap Wrenches. Economy T-Handle Tap Wrenches.
    Connect a tap to these wrenches for occasional or light-duty hand tapping. All have a T-handle design, so they're more compact than straight-handle tap wrenches but provide less leverage. The handle slides from side to side to allow tapping in spaces where fixed handles don't have room to turn.
    For Tap Size
    For Square
    Shank Size
    Lg.
    Includes
    Material
    Each
    Sliding Handle
    No. 0, No. 1, No. 2, No. 3, No. 4, No. 5, No. 6, No. 8, No. 10, No. 12, 3/16", 7/32", 1/4", M3, M3.5, M4, M4.5, M5, M6, M6.30.11" to 0.191"2 3/8"—Steel0000000000000
    1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", M6, M6.3, M7, M8, M9, M10, M11, M12, M12.50.191" to 0.275"3 1/2"—Steel0000000000000
    1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", M6, M6.3, M7, M8, M9, M10, M11, M12, M12.50.191" to 0.275"3 1/2"3/8" Square-Drive SocketSteel0000000000000
     

    Straight-Handle Tap Wrenches

    Image of Product. Front orientation. Tap Wrenches. Straight-Handle Tap Wrenches.
    Use with a tap to thread holes by hand. These tools have long handles to provide more leverage than T-handle wrenches, but they require more space for tapping.
    For Tap Size
    For Tap Pipe Size
    For Square
    Shank Size
    Lg.
    Material
    Each
    Fixed Handle
    No. 0, No. 1, No. 2, No. 3, No. 4, No. 5, No. 6, No. 8, No. 10, No. 12, 1/8", 3/16", 7/32", 1/4", M1.6, M1.8, M2, M2.2, M2.5, M3, M3.5, M4, M4.5, M5, M6, M6.3—0.11" to 0.191"7"Steel0000000000000
    No. 0, No. 1, No. 2, No. 3, No. 4, No. 5, No. 6, No. 8, No. 10, No. 12, 1/8", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", M1.6, M1.8, M2, M2.2, M2.5, M3, M3.5, M4, M4.5, M5, M6, M6.3, M7, M8, M9, M10—0.11" to 0.286"9"Steel000000000000
    No. 8, No. 10, No. 12, 1/8", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", M4, M4.5, M5, M6, M6.3, M7, M8, M9, M10, M11, M12, M12.51/16, 1/80.131" to 0.275"11"Steel0000000000000
    No. 8, No. 10, No. 12, 1/8", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", 9/16", 5/8", 11/16", 3/4", M4, M4.5, M5, M6, M6.3, M7, M8, M9, M10, M11, M12, M12.5, M14, M15, M16, M18, M191/8, 1/40.131" to 0.442"15"Steel0000000000000
    1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1 1/16", 1 1/8", M6, M6.3, M7, M8, M9, M10, M11, M12, M12.5, M14, M15, M16, M18, M20, M22, M22.5, M24, M26, M27, M281/8, 1/4, 3/8, 1/2, 3/40.191" to 0.672"19"Steel0000000000000
    3/4", 13/16", 7/8", 15/16", 1", 1 1/16", 1 1/8", 1 3/16", 1 1/4", 1 5/16", 1 3/8", 1 1/2", 1 5/8", M19, M20, M22, M22.5, M24, M26, M27, M30, M33, M35, M36, M37, M403/8, 1/2, 3/4, 1, 1 1/40.442" to 0.979"40"Steel0000000000000
    1", 1 1/16", 1 1/8", 1 3/16", 1 1/4", 1 5/16", 1 3/8", 1 1/2", 1 5/8", 1 3/4", 1 7/8", 2", 2 1/4", 2 1/2", M25, M26, M27, M30, M33, M35, M36, M37, M40, M42, M47, M563/4, 1, 1 1/4, 1 1/2, 20.6" to 1.575"54"Steel0000000000000
     

    Economy Straight-Handle Tap Wrenches

    Image of Product. Front orientation. Tap Wrenches. Economy Straight-Handle Tap Wrenches.
    For occasional or light-duty hand tapping, connect a tap to these wrenches. They have long handles to provide more leverage than T-handle wrenches, but they require more space for tapping.
    For Tap Size
    For Tap Pipe
    Size
    For Square
    Shank Size
    Lg.
    Material
    Each
    Fixed Handle
    No. 0, No. 1, No. 2, No. 3, No. 4, No. 5, No. 6, No. 8, No. 10, No. 12, 1/8", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", M1.6, M1.8, M2, M2.2, M2.5, M3, M3.5, M4, M4.5, M5, M6, M6.3, M7, M8, M9, M10, M11, M12, M12.5—0.11" to 0.275"9"Steel00000000000000
    1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", M3, M3.5, M4, M4.5, M5, M6, M6.3, M7, M8, M9, M10, M11, M12, M12.51/8, 1/40.191" to 0.6"18"Steel0000000000000
     

    Air-Powered Tap Wrenches

    Image of Product. Front orientation. Tap Wrenches. Air-Powered Tap Wrenches.
    Powered by compressed air, these tap wrenches thread holes faster and with less effort than manual tap wrenches. They’re often used in place of manual tap wrenches when threading many holes and hard materials. Compared to drill presses and CNC machines, which are stationary, these wrenches are portable so you can take them to the part that needs to be threaded. To remove chips from your hole, press the reverse button to rotate the tap counterclockwise. Switch different taps in and out of the chuck when your tap is worn down or you need a new size. Use with machine tool taps and tapping lubricants for best results.
    Air Inlet
    For Tap Size
    For Square
    Shank Size
    Max. Torque,
    in·lbf
    No. of
    Speeds
    Max. No-Load Rotational
    Speed, rpm
    Recommended Operating
    Air Pressure, psi
    Average Air Consumption
    @ Pressure
    Pipe
    Size
    Thread
    Type
    Gender
    For Air
    Hose ID
    Exhaust
    Location
    Lg.
    Wt.,
    lb.
    Each
    No. 10, No. 12, 1/4", 5/16", M5, M6, M7, M80.191" to 0.313"40013009030 ft³/min @ 90 psi1/4
    		NPT
    		Female3/8"Handle7 1/4"2.900000000000000
    1/4", 5/16", 3/8", 7/16", 1/2", M6, M7, M8, M9, M10, M11, M12, M130.25" to 0.5"40013009030 ft³/min @ 90 psi1/4
    		NPT
    		Female3/8"Handle7 1/4"2.90000000000000
     

    Mounted Tap Wrenches

    Image of Product. Front orientation. Contains Annotated. Tap Wrenches. Mounted Tap Wrenches, 8 1/2" Long Base.
    Image of Product. Front orientation. Contains Annotated. Tap Wrenches. Mounted Tap Wrenches, 13" Long Base.

    8 1/2" Long Base

    13" Long Base

    Also known as hand tappers, these wrenches mount to a flat surface for stability and guide the tap straight into the hole for accurate threading.
    Base
    For Tap Size
    Lg.
    Wd.
    Throat
    Dp.
    Clearance
    Over Base
    Overall
    Ht.
    Includes
    Material
    Each
    No. 0, No. 1, No. 2, No. 3, No. 4, No. 5, No. 6, No. 8, No. 10, No. 12, 1/4", 5/16"8 1/2"6"4 1/2"3 3/4"9"Seven Holders, Spindle Wrench, Tap Guide, Work TableSteel00000000000000
    No. 8, No. 10, 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4"13"8"7 1/2"7"14"Nine Holders, Removable Spindle Wrench, Tap Guide, Work TableSteel0000000000000
     

    Drill Bit Guides

    Image of Product. Front orientation. Drill Bit Guides.
    Place on your workpiece to drill precise holes without building a fixture.
    For Drill Bit Size
    For Drill Bit Size Decimal Equiv.
    Lg.
    Wd.
    Ht.
    Material
    Each
    3/64", 1/16", 5/64", 3/32", 7/64", 1/8", 10 Ga., 21 Ga., 25 Ga., 29 Ga., 30 Ga., 33 Ga., 36 Ga., 37 Ga., 38 Ga., 40 Ga., 43 Ga., 45 Ga., 47 Ga., 50 Ga., 53 Ga.0.0469", 0.0595", 0.0625", 0.07", 0.0781", 0.0785", 0.082", 0.089", 0.0938", 0.098", 0.1015", 0.104", 0.1065", 0.1094", 0.113", 0.125", 0.128", 0.136", 0.1495", 0.159", 0.1935"3 5/8"5/8"1/2"Steel0000000000000
    1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", 17/64", 9/32", 19/64", 5/16", 21/64", 11/32", 23/64", 3/8"0.125", 0.1406", 0.1563", 0.1719", 0.1875", 0.2031", 0.2188", 0.2344", 0.25", 0.2656", 0.2813", 0.2969", 0.3125", 0.3281", 0.3438", 0.3594", 0.375"5 1/2"3/4"7/8"Steel000000000000
    3/8", 25/64", 13/32", 7/16", 29/64", 15/32", 31/64", 1/2", 37/64"0.375", 0.3906", 0.4063", 0.4219", 0.4375", 0.4531", 0.4688", 0.4844", 0.5"5 1/4"1"7/8"Steel000000000000
    3 mm, 3.3 mm, 3.5 mm, 4 mm, 4.2 mm, 4.5 mm, 5 mm, 5.5 mm, 6 mm, 6.5 mm, 6.8 mm, 7 mm, 7.5 mm, 8 mm, 8.5 mm, 9 mm, 9.5 mm0.1181", 0.1299", 0.1378", 0.1575", 0.1654", 0.1772", 0.1968", 0.2165", 0.2362", 0.2559", 0.2677", 0.2756", 0.2953", 0.315", 0.3346", 0.3543", 0.374"5 1/2"3/4"7/8"Steel000000000000
    10 mm, 10.5 mm, 11 mm, 11.5 mm, 12 mm, 12.5 mm, 13 mm, 13.5 mm, 14 mm0.3937", 0.4134", 0.4331", 0.4528", 0.4724", 0.4921", 0.5118", 0.5315", 0.5512"5 1/4"1"1 5/8"Steel000000000000

    Clamp-On Drill Bit Guides

    Image of Product. Front orientation. Drill Bit Guides. Clamp-On Drill Bit Guides.
    Drill precise holes without building a fixture. Clamp the jig onto your material and lift and turn the turret to select the hole size you need. Use the graduations to set the jig to the centerline of your workpiece.
    For Drill Bit Size
    For Drill Bit Size Decimal Equiv.
    Max. Opening
    Wd.
    Lg.
    Wd.
    Ht.
    Material
    Each
    3/16", 1/4", 5/16", 3/8", 7/16", 1/2"0.1875", 0.25", 0.3125", 0.375", 0.4375", 0.5"4"7 1/8"3 1/2"2 1/8"Steel, Nylon0000000000000

    Handheld Guides for Flexible-Shaft Drill Bits

    Image of ProductInUse. Hand Guide with Drill Bit. Front orientation. Drill Bit Guides. Handheld Guides for Flexible-Shaft Drill Bits.
    Image of Product. Hand Guide. Front orientation. Drill Bit Guides. Handheld Guides for Flexible-Shaft Drill Bits.

    Hand Guide with Drill Bit

    Hand Guide

    Use this guide to position flexible-shaft drill bits.
    For
    Drill Bit
    Shank
    Type
    Shaft Size
    Lg.
    Material
    Each
    Round3/16", 1/4"10"Steel000000000000

    Ball Guides for Flexible-Shaft Drill Bits

    Image of ProductInUse. Ball Guide with Drill Bit. Front orientation. Drill Bit Guides. Ball Guides for Flexible-Shaft Drill Bits.
    Image of Product. Ball Guides. Front orientation. Drill Bit Guides. Ball Guides for Flexible-Shaft Drill Bits.

    Ball

    Guide

    with

    Drill Bit

    Ball Guides

    Keep flexible-shaft drill bits centered between studs and drywall.
    For
    Drill Bit
    Shank
    Type
    Shank
    Size
    Shaft
    Size
    Material
    Dia.
    No. of
    Guides
    Each
    Round3/16"3/16"Plastic1 1/2", 2"2000000000000
    back to top