Ladder and cage come unassembled for mounting flexibility and lower freight costs. Cages start between 7 and 8 feet from the ground and extend beyond the top rung by 42" with a walk-through exit. OSHA requires a cage when the distance from the floor to the top rung is more than 20 feet.

Optional security cover prevents unauthorized access. It covers five rungs and is secured by two hooks at the top and a U-clamp at the bottom.

Note: Ladders meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.

A cage is welded to these ladders for quick installation. Ladders come in sections no longer than 7 feet for easy handling—bolt sections together end-to-end (fasteners included). Cages start 7 feet above the bottom of the ladder and extend beyond the top rung by 42".

Optional security cover prevents unauthorized access. It can be welded or bolted on (holes must be drilled) to open from the right side.

Note: Ladders meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.

Posts at the top of these ladders give you something to grab when you climb up and descend. Mount ladders to the wall for access to mezzanines, roofs, and other elevated areas.

Steel ladders are durable to handle most work environments.

Serrated steps provide maximum slip resistance.

Fiberglass ladders are corrosion resistant, lightweight, and nonconductive. Steps are grit coated for good slip resistance.

304 stainless steel ladders resist corrosion and have a welded construction to minimize the collection of dust and debris, making them suitable for sanitary environments. Steps are serrated for maximum slip resistance.

Note: Ladders meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.

For technical drawings and 3-D models, click on a part number.

When ladder heights are greater than 20 feet from the floor to the top rung, a ladder cage can help prevent falls. Each section is fully welded and mounts to the side rails of stationary ladders (not to walls or other cages) that have an overall width of 16" to 20".

Bottom sections flare out for entry and exit.

Middle/top sections extend the length of the cage or can act as a top section for hatch opening use.

Walk-through sections are required for walk-through applications and should extend 42" above the top rung.

Note: At least one middle/top section and one bottom section are required for a complete assembly.

Note: Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.

Hooks along the top hold these ladders in place.

Steel ladders are durable to handle most work environments.

Aluminum ladders are lighter than steel, making them easier to move between work areas. Hooks fold inward for storage.

Swivel safety shoes (sold separately) are recommended when using ladders on floors.

For technical drawings and 3-D models, click on a part number.

Attach one of these ladders to a fixed object and drop it into a tank, manhole, pit, or temporary work area. They’re lightweight so you can easily carry them anywhere.

Note: Users are responsible for checking local, state, and federal codes, including OSHA, for safe operating practices.