Filter by
Thread Size
Thread Direction
Thread Type
DFARS Compliance
Acme and Metric Trapezoidal Thread Taps
Form general purpose Acme threads. These high-speed steel taps are for use on most metal and plastic. With a square shank, they're compatible with tap holders for drill presses and milling machines. Also known as tandem taps, these have an extended chamfer with two sets of chamfered cutting threads. Because these sets of threads have different shapes, reversing the tap for removal may cause damage to the workpiece and is not recommended. Use these taps with a rigid setup to tap through holes only.
Metric trapezoidal threads are similar to Acme threads.
For technical drawings and 3-D models, click on a part number.
Acme
Thread | Drill Bit | |||||||
|---|---|---|---|---|---|---|---|---|
Size | Lg. | Overall Lg. | Size | Decimal Size Equivalent | No. of Flutes | Pitch Dia. Limit | Each | |
Right Hand | ||||||||
Uncoated High-Speed Steel | ||||||||
| 1/4"-16 | 1 3/4" | 3" | 10 ga. | 0.1935" | 4 | 2G | 00000000 | 0000000 |
| 3/8"-12 | 2 1/8" | 4 1/16" | 7.6 mm | 0.2992" | 4 | 2G | 00000000 | 000000 |
| 7/16"-12 | 2 9/16" | 5" | 23/64" | 0.3594" | 4 | 2G | 00000000 | 000000 |
| 1/2"-10 | 2 9/16" | 5" | 13/32" | 0.4063" | 4 | 2G | 00000000 | 000000 |
| 5/8"-8 | 3 3/16" | 6 1/4" | 13 mm | 0.5118" | 4 | 2G | 00000000 | 000000 |
| 5/8"-10 | 3 3/16" | 6 1/4" | 17/32" | 0.5313" | 4 | 2G | 00000000 | 000000 |
| 3/4"-5 | 4 5/16" | 7 15/16" | 14.5 mm | 0.5709" | 4 | 2G | 00000000 | 000000 |
| 3/4"-6 | 4 5/16" | 7 15/16" | 39/64" | 0.6094" | 4 | 2G | 00000000 | 000000 |
| 3/4"-8 | 4 5/16" | 7 15/16" | 41/64" | 0.6406" | 4 | 2G | 00000000 | 000000 |
| 3/4"-10 | 4 5/16" | 7 15/16" | 21/32" | 0.6563" | 4 | 2G | 00000000 | 000000 |
| 3/4"-16 | 4 5/16" | 7 15/16" | 11/16" | 0.6875" | 4 | 2G | 00000000 | 000000 |
| 7/8"-6 | 4 3/8" | 8 5/8" | 47/64" | 0.7344" | 4 | 2G | 00000000 | 000000 |
| 1"-4 | 5 1/4" | 10 1/8" | 49/64" | 0.7656" | 4 | 2G | 00000000 | 000000 |
| 1"-5 | 5 1/4" | 10 1/8" | 21 mm | 0.8268" | 4 | 2G | 00000000 | 000000 |
| 1"-6 | 5 1/4" | 10 1/8" | 53/64" | 0.833" | 4 | 2G | 00000000 | 000000 |
| 1"-8 | 5 1/4" | 10 1/8" | 7/8" | 0.875" | 4 | 2G | 00000000 | 000000 |
| 1"-10 | 5 1/4" | 10 1/8" | 29/32" | 0.9063" | 4 | 2G | 00000000 | 000000 |
| 1 1/8"-5 | 5 1/4" | 10 3/4" | 24 mm | 0.9449" | 4 | 2G | 00000000 | 000000 |
| 1 1/4"-4 | 5 1/4" | 11 1/8" | 1 1/64" | 1.0156" | 4 | 2G | 00000000 | 000000 |
| 1 1/4"-5 | 5 1/4" | 11 1/8" | 1 5/64" | 1.0781" | 4 | 2G | 00000000 | 000000 |
| 1 3/8"-4 | 5 7/8" | 12 1/4" | 1 9/64" | 1.1406" | 4 | 2G | 00000000 | 000000 |
| 1 1/2"-4 | 5 7/8" | 12 5/8" | 32 mm | 1.2598" | 4 | 2G | 00000000 | 000000 |
| 1 1/2"-5 | 5 7/8" | 12 5/8" | 1 19/64" | 1.3" | 4 | 2G | 00000000 | 000000 |
Left Hand | ||||||||
Uncoated High-Speed Steel | ||||||||
| 1/4"-16 | 1 3/4" | 3" | 10 ga. | 0.1935" | 4 | 2G | 00000000 | 000000 |
| 3/8"-12 | 2 1/8" | 4 1/16" | 7.6 mm | 0.2992" | 4 | 2G | 00000000 | 000000 |
| 7/16"-12 | 2 9/16" | 5" | 23/64" | 0.3594" | 4 | 2G | 00000000 | 000000 |
| 1/2"-10 | 2 9/16" | 5" | 13/32" | 0.4063" | 4 | 2G | 00000000 | 000000 |
| 5/8"-8 | 3 3/16" | 6 1/4" | 13 mm | 0.5118" | 4 | 2G | 00000000 | 000000 |
| 5/8"-10 | 3 3/16" | 6 1/4" | 17/32" | 0.5313" | 4 | 2G | 00000000 | 000000 |
| 3/4"-5 | 4 5/16" | 7 15/16" | 14.5 mm | 0.5709" | 4 | 2G | 00000000 | 000000 |
| 3/4"-6 | 4 5/16" | 7 15/16" | 39/64" | 0.6094" | 4 | 2G | 00000000 | 000000 |
| 3/4"-8 | 4 5/16" | 7 15/16" | 41/64" | 0.6406" | 4 | 2G | 00000000 | 000000 |
| 3/4"-10 | 4 5/16" | 7 15/16" | 21/32" | 0.6563" | 4 | 2G | 00000000 | 000000 |
| 3/4"-16 | 4 5/16" | 7 15/16" | 11/16" | 0.6875" | 4 | 2G | 00000000 | 000000 |
| 7/8"-6 | 4 3/8" | 8 5/8" | 47/64" | 0.7344" | 4 | 2G | 00000000 | 000000 |
| 1"-4 | 5 1/4" | 10 1/8" | 49/64" | 0.7656" | 4 | 2G | 00000000 | 000000 |
| 1"-5 | 5 1/4" | 10 1/8" | 21 mm | 0.8268" | 4 | 2G | 00000000 | 000000 |
| 1"-6 | 5 1/4" | 10 1/8" | 53/64" | 0.833" | 4 | 2G | 00000000 | 000000 |
| 1"-8 | 5 1/4" | 10 1/8" | 7/8" | 0.875" | 4 | 2G | 00000000 | 000000 |
| 1"-10 | 5 1/4" | 10 1/8" | 29/32" | 0.9063" | 4 | 2G | 00000000 | 000000 |
| 1 1/8"-5 | 5 1/4" | 10 3/4" | 24 mm | 0.9449" | 4 | 2G | 00000000 | 000000 |
| 1 1/4"-4 | 5 1/4" | 11 1/8" | 1 1/64" | 1.0156" | 4 | 2G | 00000000 | 000000 |
| 1 1/4"-5 | 5 1/4" | 11 1/8" | 1 5/64" | 1.0781" | 4 | 2G | 00000000 | 000000 |
| 1 3/8"-4 | 5 7/8" | 12 1/4" | 1 9/64" | 1.1406" | 4 | 2G | 00000000 | 000000 |
| 1 1/2"-4 | 5 7/8" | 12 5/8" | 32 mm | 1.2598" | 4 | 2G | 00000000 | 000000 |
| 1 1/2"-5 | 5 7/8" | 12 5/8" | 1 19/64" | 1.3" | 4 | 2G | 00000000 | 000000 |
Metric Trapezoidal
Thread | Drill Bit | Right Hand | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Lg. | Overall Lg. | Size | Decimal Size Equivalent | No. of Flutes | Pitch Dia. Limit | Each | |
Uncoated High-Speed Steel | |||||||||
| M10 | 2 | 2.56" | 5 1/8" | 8 mm | 0.315" | 3 | H7 | 0000000 | 0000000 |
| M12 | 3 | 2.56" | 5 1/8" | 9 mm | 0.3543" | 3 | H7 | 0000000 | 000000 |
| M14 | 3 | 3.15" | 6 5/16" | 11 mm | 0.4331" | 4 | H7 | 0000000 | 000000 |
| M16 | 4 | 3.15" | 6 5/16" | 12 mm | 0.4724" | 4 | H7 | 0000000 | 000000 |
| M18 | 4 | 4.33" | 7 7/8" | 14 mm | 0.5512" | 4 | H7 | 0000000 | 000000 |
| M20 | 4 | 4.33" | 8 3/4" | 16 mm | 0.6299" | 4 | H7 | 0000000 | 000000 |
| M22 | 5 | 4.33" | 8 3/4" | 17 mm | 0.6693" | 4 | H7 | 0000000 | 000000 |
| M24 | 5 | 5.31" | 10 1/4" | 19 mm | 0.748" | 4 | H7 | 0000000 | 000000 |
| M26 | 5 | 5.31" | 10 1/4" | 21 mm | 0.8268" | 4 | H7 | 0000000 | 000000 |