These lights have a longer reach and hold their position better than gooseneck-arm lights, especially around vibration. Attach them to your workspace for additional lighting. All are furnished with LEDs that last longer, are more efficient, and generate less heat than other light technologies.

Lights with a neutral light appearance cast a white light that is consistent with those often found in workspaces. Lights with a cool or daylight appearance highlight white/blue tones, which is good for inspecting.

Faster and easier to reposition than articulating-arm lights, these gooseneck-arm lights attach to your workspace for additional lighting. They're more rugged than office desk lamps. All are furnished with LEDs that last longer, are more efficient, and generate less heat than other light technologies. They produce a warm light appearance that casts a yellow tone similar to incandescent lights.

Gooseneck arms can be repositioned faster and more easily than articulating arms. Mount these lights directly inside machines—they have a heat- and chemical-resistant glass lens that's sealed to keep out fluids, chips, and shavings. They’re rated IP67 to withstand temporary submersion in a maximum of one meter of water for up to 30 minutes, so they are built tougher than needed for machine environments. These lights have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. They produce a cool light appearance that highlights white/blue tones, which is good for inspecting.

Power supplies, also known as transformers, are for use on the hardwire lights to convert your facility's 120 or 240 AC voltage into 24 DC voltage. They cannot be sold to California or Vermont due to local energy efficiency requirements.

The articulating arm on these lights holds its position better than gooseneck-arm lights, especially around vibration. Mount these lights directly inside machines—they have a heat- and chemical-resistant glass lens that's sealed to keep out fluids, chips, and shavings. They’re rated IP67 to withstand temporary submersion in a maximum of one meter of water for up to 30 minutes, so they are built tougher than needed for machine environments. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. They produce a cool light appearance that highlights white/blue tones, which is good for inspecting.

Shine light on machinery and through the sight glass on tanks to inspect food, brewery, chemical, pharmaceutical, and bio-tech processing lines. Made of stainless steel, these lights withstand frequent washdowns with harsh cleaners and sanitizers. With a sealed lens, rounded edges, and polished surfaces, there aren’t any pits and crevices where bacteria and water can get trapped, so you can leave them mounted to machinery during cleaning. The lens will also stand up to bumps without cracking. Rated IP65 and NEMA 4X, these lights are protected against dust, dirt, corrosion, and light rinses.

Using built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. Their cool light appearance is good for inspecting, and the 25° beam angle casts a narrow beam of light to maximize brightness on the inspection area. Use the articulating arm to aim light where it’s needed. Compared to gooseneck-arm lights, these lights hold their position better, especially around vibration.

These lights have a mechanical switch that when pushed once, will turn the light on for two minutes. When pushed twice, the light will turn on for 30 minutes. When the switch is pushed and held, the light will turn on until the switch is released.

Pivot the head to cast a narrow beam of light to exactly where it's needed. Mount these lights directly inside machines—they have a heat- and chemical-resistant glass lens that’s sealed to keep out fluids, chips, and shavings. They’re rated IP67 to withstand temporary submersion in a maximum of one meter of water for up to 30 minutes, so they are built tougher than needed for machine environments. These lights have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. They produce a cool light appearance that highlights white/blue tones, which is good for inspecting.

Power supplies, also known as transformers, convert your facility's 120 or 240 AC voltage into 24 DC voltage. They cannot be sold to California or Vermont due to local energy efficiency requirements.

These lights cast a narrower beam than other gooseneck-arm machine lights. Reposition them faster and more easily than articulating-arm lights. They have a durable glass lens that's sealed to keep out fluids, chips, and shavings, so they can be mounted directly inside machines. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. They produce a cool or daylight appearance that highlights white/blue tones, which is good for inspecting.

IP65 lights are dust tight and protect against low-pressure washdowns, such as water from a garden hose. IP67 lights withstand temporary submersion in a maximum of one meter of water for up to 30 minutes, so they are built tougher than needed for machine environments.

Bases allow you to convert Style A lights with a 24" arm reach and Style C lights from a fastener mount to a clamp-on or magnetic mount.

Power supplies, also known as transformers, convert your facility's 120 or 240 AC voltage into 24V DC voltage.

Because these lights have a reflector, they distribute light more evenly than other portable lights. A mounting clip at the base lets you attach them to nearby surfaces.

Style A and B are compatible with medium-base, screw-in CFL (compact fluorescent), halogen, incandescent, and LED bulbs (sold separately).

Style C are compatible with medium-base, screw-in CFL (compact fluorescent), halogen, incandescent, infrared, and LED bulbs (sold separately).