Brightness is measured in lumens; the higher the lumens, the brighter the bulb. Color rendering index (CRI) is a measurement on a scale of 0-100 of how accurately the light from a bulb represents an object's true colors; the higher the number, the more natural the colors appear. Any CRI value over 80 will show colors true to life. Bulbs with a warm light appearance have yellow tones. Bulbs with a neutral light appearance are often used in workspaces. Bulbs with a cool or daylight appearance have white/blue tones and are good for inspecting. A bulb’s estimated yearly cost is based on 3 hours of usage per day at $0.11 per kWh.

LED bulbs last longer and are more efficient than fluorescent bulbs. They generate little heat and withstand vibration. Socket-ready bulbs work with most instant-start electronic ballasts, but not all. For a full list of compatible ballasts select a part number and view product detail. Ballast bypass bulbs eliminate the need for a ballast so the socket must be wired directly to the power source.

Fluorescent bulbs are energy efficient, but they contain small amounts of mercury (for disposal information, visit www.epa.gov/cfl). Plastic-coated glass bulbs are shatter resistant; the coating retains glass shards if they break.

Bulbs that cannot be sold to the regions listed exceed local regulatory limits on mercury and/or do not meet local efficiency standards.

For technical drawings and 3-D models, click on a part number.

Brightness is measured in lumens; the higher the lumens, the brighter the bulb. Color rendering index (CRI) is a measurement on a scale of 0-100 of how accurately the light from a bulb represents an object's true colors; the higher the number, the more natural the colors appear. Any CRI value over 80 will show colors true to life. Bulbs with a warm light appearance have yellow tones. Bulbs with a neutral light appearance are often used in workspaces. Bulbs with a cool or daylight appearance have white/blue tones and are good for inspecting. A bulb’s estimated yearly cost is based on 3 hours of usage per day at $0.11 per kWh. They cannot be sold to Canada because they do not meet local efficiency standards and exceed local regulatory limits on mercury (for disposal information, visit www.epa.gov/cfl).

Brightness is measured in lumens; the higher the lumens, the brighter the bulb.

2-way bulbs operate at two brightness levels, as in high- and low-beam headlights.

Disinfect and sterilize air, water, and surfaces with short wave ultraviolet radiation. Ultraviolet radiation is harmful to skin and eyes; only install bulbs in fixtures that provide adequate protection. A bulb’s estimated yearly cost is based on 3 hours of usage per day at $0.11 per kWh.

Bulbs cannot be sold to Canada due to import regulations.