T-Slotted Framing Slides, Tracks, and Rollers
Slide drawers, panels, and doors with these tracks and rollers.
For technical drawings and 3-D models, click on a part number.
Panel tracks snap into T-slotted rails, so you can slide panels smoothly along the track. They include a top and bottom track and don’t require fasteners.
For Rail Ht. | ||||||||
|---|---|---|---|---|---|---|---|---|
| Single | Double, Quad | Triple | Lg., ft. | For Max. No. of Panels | For Max. Panel Thick. | Material | Each | |
Silver | ||||||||
| 1", 25mm | 2", 50mm | 3" | 4 | 2 | 1/4" | Anodized Aluminum | 000000000 | 000000 |
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 4 | 3 | 1/4" | Anodized Aluminum | 00000000 | 00000 |
Black | ||||||||
| 1", 25mm | 2", 50mm | 3" | 4 | 2 | 1/4" | Anodized Aluminum | 000000000 | 00000 |
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 4 | 3 | 1/4" | Anodized Aluminum | 000000000 | 00000 |
Panel slides attach to panels and slide smoothly along T-slotted rails. They do not require access to the end of the rail to install.
Twist-on mount panel slides drop and twist into the T-slot. While they do not require access to the end of the rail to install, if the panel is already fastened to the slides, you’ll need to slide them in from the end of the rail.
Snap-in mount panel slides can hold one or two panels in one slot. When two panels are installed, one slide acts as a catch for the second slide, preventing that panel from sliding past the first.
Rail slides allow one rail to slide along another. Made from a single piece of plastic, they can be cut to size for a variety of applications. Adjust their positioning without fasteners. While simple to install, they are less secure than heavy duty rail slides.
Rail slides with a T-shaped side install on either the top or bottom rail. They slide into the end of the slot and won’t fall out, so you can use them to hang something.
Rail slides with a flat side attach to a component with fasteners. You can place heavy components on top without using fasteners.
Rail slides with a straight side drop into T-slotted rail to guide the sliding rail. They don’t require access to the end of the rail to install, but they can’t be used to hang something on their own because they will fall out of the slot.
Rail slides with a T-reducer allow you to transition between differently sized rails.
For Rail Ht. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double, Quad | Triple | Lg. | Wd. | Capacity, lbs. | Color | Material | Mounting Fasteners Included | Each | |
T × Flat | ||||||||||
| 1" | 2" | 3" | 1 7/8" | 13/16" | 8 | White | Plastic | No | 0000000 | 00000 |
| 1 1/2" | 3" | 4 1/2" | 2 13/16" | 1 1/4" | 35 | White | Plastic | No | 0000000 | 0000 |
| 25mm | 50mm | __ | 1 13/16" | 13/16" | 12 | White | Plastic | No | 0000000 | 0000 |
| 40mm | 80mm | 120mm | 2 15/16" | 1 1/4" | 25 | White | Plastic | No | 0000000 | 0000 |
| 45mm | 90mm | __ | 3 1/8" | 1 9/16" | Not Rated | White | Plastic | No | 0000000 | 0000 |
T × Straight | ||||||||||
| 45mm | 90mm | __ | 3 1/8" | 1 9/16" | Not Rated | White | Plastic | No | 0000000 | 0000 |
T × T | ||||||||||
| 30mm | 60mm | 120mm | 3 1/8" | 1" | Not Rated | White | Plastic | No | 0000000 | 0000 |
| 45mm | 90mm | __ | 3 1/8" | 1 9/16" | Not Rated | White | Plastic | No | 0000000 | 0000 |
T × T-Reducer | ||||||||||
| 30mm, 45mm | 60mm, 90mm | 120mm | 2 3/8" | 7/8" | Not Rated | White | Plastic | Yes | 0000000 | 0000 |
Heavy duty rail slides have a zinc body and plastic liners for durability while sliding one rail along another. They attach with the included fasteners.
Rail slides with locking handle make it easy to position and keep the slide in place. You’ll need to drill a hole in the rail to install the handle. Cam handles engage when you push down on them. Clamp handles rotate freely when the handle is lifted and engage when it's released.
For Rail Ht. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double, Quad | Triple | Lg. | Wd. | Capacity | Color | Carriage Material | Liner Material | Required Installation Hole Dia. | Mounting Fasteners Included | Each | |
Rail Slides | ||||||||||||
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 3 1/8" | 1 1/4" | Not Rated | Gray | Zinc | Plastic | __ | Yes | 00000000 | 000000 |
Rail Slides with Locking/Cam Handle | ||||||||||||
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 3 1/8" | 1 1/4" | Not Rated | Gray | Zinc | Plastic | 6mm | Yes | 00000000 | 00000 |
Rail Slides with Locking/Clamp Handle | ||||||||||||
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 3 1/8" | 1 1/4" | Not Rated | Gray | Zinc | Plastic | 6mm | Yes | 00000000 | 00000 |
Pivoting rail slides can rotate rails 360° even while sliding along the other T-slotted rail. They are often used to make an accordion or bifold door.
To install perpendicular slides, tap a hole in the end of the rail and screw in the slide.
Rail slides with a straight side drop into T-slotted rail to guide the sliding rail. They don’t require access to the end of the rail to install, but they can’t be used to hang something on their own because they will fall out of the slot.
Rail slides with a T-shaped side install on either the top or bottom rail. They slide into the end of the slot and won’t fall out, so you can use them to hang something.
Rail Slides | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Rail Ht. | Taps | ||||||||||||
| Single | Double, Quad | Triple | Lg. | Wd. | Capacity, lbs. | Color | Material | Mounting Fasteners Included | Required Tap Thread Size  | Each | Each | ||
Perpendicular Pivot | |||||||||||||
Straight | |||||||||||||
| 1" | 2" | 3" | 1" | 13/16" | 6 | White | Plastic | Yes | 1/4"-20 | 0000000 | 00000 | 00000000 | 00000 |
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 1 1/2" | 1 1/4" | 13 | White | Plastic | Yes | 5/16"-18 | 00000000 | 0000 | 00000000 | 0000 |
| 25mm | 50mm | __ | 1" | 13/16" | 7 | Black | Plastic | Yes | M6 | 0000000 | 0000 | 0000000 | 0000 |
| 40mm | 80mm | 120mm | 1 1/2" | 1 1/4" | 20 | Black | Plastic | Yes | M8 | 00000000 | 0000 | 0000000 | 0000 |
T | |||||||||||||
| 1", 25mm | 2", 50mm | 3" | 1" | 1" | 6 | White | Plastic | Yes | 1/4"-20 | 0000000 | 00000 | 00000000 | 0000 |
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 1 1/2" | 1 1/2" | 13 | White | Plastic | Yes | 5/16"-18 | 0000000 | 00000 | 00000000 | 0000 |
Inline Pivot | |||||||||||||
Straight | |||||||||||||
| 20mm | 40mm | __ | 13/16" | 11/16" | 6 | Black | Plastic | Yes | __ | 0000000 | 0000 | 000000 | 00 |
| 30mm | 60mm | __ | 1 3/16" | 1 1/16" | 8 | Black | Plastic | Yes | __ | 0000000 | 0000 | 000000 | 00 |
| 40mm | 80mm | 120mm | 1 9/16" | 1 9/16" | 13 | Black | Plastic | Yes | __ | 0000000 | 0000 | 000000 | 00 |
Telescoping rail slides are useful for building drawers and pullout trays because they allow sliding rails to extend and retract along each other.
For Rail Ht. | Bearing | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double, Quad | Triple | Closed Lg. | Travel Lg. | Wd. | Capacity per Pair, lbs. | Color | Material | Type | Material | Mounting Fasteners Included | Pair | |
| 1" | 2" | 3" | 15 3/4" | 15 3/4" | 1 3/4" | 80 | Silver | 304 Stainless Steel | Ball | 304 Stainless Steel | No | 0000000 | 000000 |
| 1" | 2" | 3" | 17 11/16" | 17 11/16" | 1 3/4" | 75 | Silver | 304 Stainless Steel | Ball | 304 Stainless Steel | No | 0000000 | 00000 |
| 1" | 2" | 3" | 21 5/8" | 21 5/8" | 1 3/4" | 75 | Silver | 304 Stainless Steel | Ball | 304 Stainless Steel | No | 0000000 | 00000 |
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 15 3/4" | 15 3/4" | 1 3/4" | 80 | Silver | 304 Stainless Steel | Ball | 304 Stainless Steel | No | 0000000 | 00000 |
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 17 11/16" | 17 11/16" | 1 3/4" | 75 | Silver | 304 Stainless Steel | Ball | 304 Stainless Steel | No | 0000000 | 00000 |
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 21 5/8" | 21 5/8" | 1 3/4" | 75 | Silver | 304 Stainless Steel | Ball | 304 Stainless Steel | No | 0000000 | 00000 |
Roller wheels move frames, panels, and other components along the length of the T-slot.
Standard wheels roll along the slot and can be installed on a panel or rail. Use the included fasteners or install them on the end of the rail by tapping a hole.
Reducer wheels allow a smaller sized rail to roll along the slot of a larger sized rail.
Bracket-mount wheels join two rails together at a 90° angle and then roll along the length of a T-slot. To install, thread the included self-tapping screw into the end of each rail.
Captive wheels mount within a T-slot, preventing the wheel from pulling out of the slot. They require access to the end of the rail to install. Slide one side into the slot of the moving component and fasten the other side to the stationary rail.
For Rail Ht. | Wheel | Bearing | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double, Quad | Triple | Capacity, lbs. | Dia. | Material | Type | Material | Color | Material | Mounting Fasteners Included | For Tap Thread Size | Each | |
Standard | |||||||||||||
| 1" | 2" | 3" | Not Rated | 1 1/2" | Plastic | Sleeve | Bronze | Black | Plastic | Yes | 1/4"-20 | 000000000 | 000000 |
| 1 1/2" | 3" | 4 1/2" | Not Rated | 2" | Plastic | Ball | Steel | Black | Plastic | Yes | 5/16"-18 | 00000000 | 00000 |
| 20mm | 40mm | __ | 20 | 3/4" | Plastic | Sleeve | Steel | Black | Plastic | Yes | M5 | 00000000 | 00000 |
| 25mm | 50mm | __ | Not Rated | 1 1/2" | Plastic | Sleeve | Bronze | Blue | Plastic | Yes | M6 | 00000000 | 00000 |
| 30mm, 40mm | 60mm, 80mm | 120mm | 30 | 1 1/2" | Plastic | Ball | Steel | Black | Plastic | Yes | M6 | 00000000 | 00000 |
| 45mm | 90mm | __ | 175 | 2 1/4" | Plastic | Ball | Steel | Black | Plastic | Yes | M8 | 00000000 | 00000 |
Reducer | |||||||||||||
| 1", 1 1/2" | 2", 3" | 3", 4 1/2" | Not Rated | 1 1/2" | Plastic | Sleeve | Bronze | Black | Plastic | Yes | 1/4"-20 | 000000000 | 00000 |
| 25mm, 40mm | 50mm, 80mm | 120mm | Not Rated | 1 1/2" | Plastic | Sleeve | Bronze | Blue | Plastic | Yes | M6 | 00000000 | 00000 |
Bracket-Mount | |||||||||||||
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 30 | 1 1/2" | Plastic | Ball | Steel | Silver | Aluminum | Yes | __ | 00000000 | 00000 |
| 45mm | 90mm | __ | 40 | 1 1/2" | Plastic | Ball | Steel | Silver | Aluminum | Yes | __ | 00000000 | 00000 |
Captive | |||||||||||||
| 40mm | 80mm | 120mm | 11 | 5/8" | Plastic | Sleeve | Steel | Black | Plastic | Yes | __ | 00000000 | 00000 |
T-Slotted Framing Linear Bearings and Track Rollers
For technical drawings and 3-D models, click on a part number.
Track rollers are for applications that don't require high precision, such as sliding door frames, glides, and track systems. Multiple track rollers can be used on a rail. Because they’re side mount, they allow you to attach and roll components along the side of the rail.
Sleeve bearings don’t need to be lubricated, but they aren’t as long-lasting and don’t roll as smoothly as ball bearings. Ball bearings last longer and roll more smoothly than sleeve bearings but need to be lubricated.
Roller | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rail Ht. | Capacity, lbs. | (A) | (B) | (C) | Dia. | Color | Material | Carriage Material | Includes | Mounting Fasteners Included | Each | |
Silver Carriage | ||||||||||||
Side-Mount for Single Rails | ||||||||||||
Sleeve Bearing—Bronze | ||||||||||||
| 1" | 25 | 1 5/16" | 3 5/8" | 3 1/8" | 1 1/2" | Black | Nylon Plastic | Anodized Aluminum | One Carriage with Two Rollers | Yes | 000000000 | 000000 |
| 1 1/2" | 25 | 1 7/8" | 5 1/8" | 4 5/8" | 2" | Black | Nylon Plastic | Anodized Aluminum | One Carriage with Two Rollers | Yes | 000000000 | 00000 |
| 25mm | 25 | 33mm | 90mm | 78mm | 38mm | Blue | Nylon Plastic | Anodized Aluminum | One Carriage with Two Rollers | Yes | 0000000 | 00000 |
| 40mm | 25 | 49mm | 137mm | 123mm | 54mm | Blue | Nylon Plastic | Anodized Aluminum | One Carriage with Two Rollers | Yes | 00000000 | 00000 |
Ball Bearing—Steel | ||||||||||||
| 1 1/2" | 25 | 1 7/8" | 5 1/8" | 4 5/8" | 2" | Black | Nylon Plastic | Anodized Aluminum | One Carriage with Two Rollers | Yes | 0000000 | 000000 |
| 40mm | 25 | 49mm | 137mm | 123mm | 54mm | Blue | Nylon Plastic | Anodized Aluminum | One Carriage with Two Rollers | Yes | 0000000 | 000000 |
Side-Mount for Double Rails | ||||||||||||
Sleeve Bearing—Bronze | ||||||||||||
| 2" | 25 | 1 5/16" | 4 5/8" | 4 1/8" | 1 1/2" | Black | Nylon Plastic | Anodized Aluminum | One Carriage with Two Rollers | Yes | 000000000 | 00000 |
| 3" | 25 | 1 7/8" | 6 5/8" | 6 1/8" | 2" | Black | Nylon Plastic | Anodized Aluminum | One Carriage with Two Rollers | Yes | 000000000 | 00000 |
| 50mm | 25 | 33mm | 115mm | 103mm | 38mm | Blue | Nylon Plastic | Anodized Aluminum | One Carriage with Two Rollers | Yes | 0000000 | 00000 |
| 80mm | 25 | 49mm | 177mm | 163mm | 54mm | Blue | Nylon Plastic | Anodized Aluminum | One Carriage with Two Rollers | Yes | 00000000 | 00000 |
Ball Bearing—Steel | ||||||||||||
| 3" | 25 | 1 7/8" | 6 5/8" | 6 1/8" | 2" | Black | Nylon Plastic | Anodized Aluminum | One Carriage with Two Rollers | Yes | 0000000 | 000000 |
| 80mm | 25 | 49mm | 177mm | 163mm | 54mm | Blue | Nylon Plastic | Anodized Aluminum | One Carriage with Two Rollers | Yes | 0000000 | 000000 |
Black Carriage | ||||||||||||
Side-Mount for Single Rails | ||||||||||||
Sleeve Bearing—Bronze | ||||||||||||
| 1" | 25 | 1 5/16" | 3 5/8" | 3 1/8" | 1 1/2" | Black | Nylon Plastic | Anodized Aluminum | One Carriage with Two Rollers | Yes | 0000000 | 00000 |
| 1 1/2" | 25 | 1 7/8" | 5 1/8" | 4 5/8" | 2" | Black | Nylon Plastic | Anodized Aluminum | One Carriage with Two Rollers | Yes | 0000000 | 000000 |
| 40mm | 25 | 49mm | 137mm | 123mm | 54mm | Blue | Nylon Plastic | Anodized Aluminum | One Carriage with Two Rollers | Yes | 0000000 | 000000 |
Side-Mount for Double Rails | ||||||||||||
Sleeve Bearing—Bronze | ||||||||||||
| 2" | 25 | 1 5/16" | 4 5/8" | 4 1/8" | 1 1/2" | Black | Nylon Plastic | Anodized Aluminum | One Carriage with Two Rollers | Yes | 0000000 | 00000 |
| 3" | 25 | 1 7/8" | 6 5/8" | 6 1/8" | 2" | Black | Nylon Plastic | Anodized Aluminum | One Carriage with Two Rollers | Yes | 0000000 | 000000 |
| 80mm | 25 | 49mm | 177mm | 163mm | 54mm | Blue | Nylon Plastic | Anodized Aluminum | One Carriage with Two Rollers | Yes | 0000000 | 000000 |
High-capacity track rollers are best for moving heavy items that don’t require high precision, such as sliding doors. They travel inside channel tracks (sold separately). Attach your sliding component to the other side of the track roller. Included locking end stops bring a sliding component to a stop and hold it in place.
Note: Sliding doors must be guided above and below to keep the door moving straight and prevent it from swinging.
Roller | Silver Carriage | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rail Ht., mm | Capacity, lbs. | (A), mm | (B), mm | (C), mm | Dia., mm | Color | Material | Carriage Material | Includes | Mounting Fasteners Included | Each | |
Bottom/Top-Mount for Single Rails | ||||||||||||
Ball Bearing—Steel | ||||||||||||
| 40 | 65 | 25 | 110 | 31 | 21 | White | Polyurethane Rubber | Aluminum | Two Carriages, Two Locking End Stops, Two Slides with Four Rollers | Yes | 0000000 | 000000 |
T-Slotted Framing Conveyors
Add rollers to T-slotted framing to create flow rails, ball transfer tables, and other manual conveyors.
Use roller mounts in pairs to support conveyor rollers in T-slotted framing.
For technical drawings and 3-D models, click on a part number.
For Rail Ht. | For Axle | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Triple | Shape | Dia. | Lg. | Color | Material | Mounting Fasteners Included | Each | |
Roller Mounting Bracket | ||||||||||
| 1 1/2", 40mm, 45mm | 3", 80mm, 90mm | 4 1/2" | Hex | 7/16" | 2" | Black | Plastic | No | 00000000 | 00000 |
| 1 1/2", 40mm, 45mm | 3", 80mm, 90mm | 4 1/2" | Round | 1/4" | 2" | Black | Plastic | No | 00000000 | 0000 |
| 1 1/2", 40mm, 45mm | 3", 80mm, 90mm | 4 1/2" | Round | 5/16", 8mm | 2" | Black | Fiberglass-Reinforced Nylon Plastic | No | 0000000 | 0000 |