About Push-to-Close Latches
More
T-Slotted Framing Structural Brackets
Connect T-slotted rails and reinforce joints for structural stability. Fasteners are included.
For technical drawings and 3-D models, click on a part number.
Corner brackets are also known as angle brackets.
Extended brackets have more connection points for stronger connections than standard-length brackets.
Gusset brackets are reinforced to limit sway for more structural stability than standard corner brackets. Closed gusset brackets include a cover for a finished appearance and better dust protection than open gusset brackets.
Corner brackets are also known as angle brackets.
Outside corner and three-way outside corner brackets connect the ends of rails for a finished look at your corner. To install, tap the existing hole in the end of each rail and screw the bracket in.
| For Rail Ht. | Lg. | Color | Material | Required Tap Thread Size  | Rail Machining | Mounting Fasteners Included | Each | |
Three-Way Outside Corner for Four Slot Single Rails | ||||||||
|---|---|---|---|---|---|---|---|---|
| 20mm | 25/32" | Black | Powder-Coated Zinc | M5 | Required | Yes | 0000000 | 000000 |
Use diagonal brace ends to make a brace of any length—a connecting rail (sold separately) between the brace ends is required. To install, use a tap (sold separately) to create a threaded hole, then fasten the brace end to a connecting rail using the included hardware.
| For Rail Ht. | Lg. | Color | Material | Required Tap Thread Size | Rail Machining | Mounting Fasteners Included | Pkg. Qty. | Pkg. | |
| 40mm | 2 1/16" | Silver | Zinc | M8 | Required | Yes | 2 | 00000000 | 000000 |
Concealed brackets mount internally and stay out of sight once installed.
Corner concealed brackets slide into the T-slots of your two intersecting rails, leaving the outside surface slots open for mounting other components.
Concealed brackets mount internally and stay out of sight once installed.
Anchor concealed brackets allow positioning anywhere along the mating rail’s T-slot. Drill an installation hole in the face of one rail to install. Since the fastener is machined into the rail profile, these brackets create stronger connections than other brackets that don’t require machining. You can also use these brackets with our rails with machined bore holes.
For Rail Ht. | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Triple | Material | No. of Installation Holes Required | Required Installation Hole Dia. | Rail Machining | Mounting Fasteners Included | Each | |
Silver | |||||||||
| 1 1/2" | 3" | 4 1/2" | Zinc | 1 | 13/16" | Required | Yes | 000000000 | 00000 |
| 1", 25mm | 2", 50mm | 3" | Zinc | 1 | 9/16" | Required | Yes | 000000000 | 0000 |
| 20mm | 40mm | __ | Zinc | 1 | 12mm | Required | Yes | 0000000 | 0000 |
| 30mm | 60mm | __ | Zinc | 1 | 20mm | Required | Yes | 00000000 | 0000 |
| 40mm | 80mm | __ | Zinc | 1 | 20mm | Required | Yes | 0000000 | 0000 |
| 45mm | 90mm | __ | Zinc | 1 | 20mm | Required | Yes | 00000000 | 0000 |
Black | |||||||||
| 1 1/2" | 3" | 4 1/2" | Zinc | 1 | 13/16" | Required | Yes | 00000000 | 0000 |
| 1", 25mm | 2", 50mm | 3" | Zinc | 1 | 9/16" | Required | Yes | 00000000 | 0000 |
Concealed brackets mount internally and stay out of sight once installed.
Double anchor concealed brackets allow positioning anywhere along the mating rail’s T-slot. Drill installation holes in two faces of one rail to install. Since the fasteners are machined into the rail profile, these brackets create stronger connections than other brackets that don’t require machining.
Concealed brackets mount internally and stay out of sight once installed.
Double anchor concealed brackets allow positioning anywhere along the mating rail’s T-slot. Drill installation holes in two faces of one rail to install. Since the fasteners are machined into the rail profile, these brackets create stronger connections than other brackets that don’t require machining.
Concealed brackets mount internally and stay out of sight once installed.
Butt anchor concealed brackets join rails end-to-end to create longer rails. Drill an installation hole in the face of each rail to install. Since the fasteners are machined into the rail profile, these brackets create stronger connections than other brackets that don’t require machining.
For Rail Ht. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Triple | Color | Material | No. of Installation Holes Required | Required Installation Hole Dia. | Rail Machining | Mounting Fasteners Included | Each | |
| 1" | 2" | 3" | Silver | Zinc | 2 | 9/16" | Required | Yes | 000000000 | 000000 |
| 1 1/2" | 3" | 4 1/2" | Silver | Zinc | 2 | 13/16" | Required | Yes | 00000000 | 00000 |
| 20mm | 40mm | __ | Silver | Zinc | 2 | 12mm | Required | Yes | 00000000 | 0000 |
| 30mm | 60mm | __ | Silver | Zinc | 2 | 20mm | Required | Yes | 00000000 | 0000 |
| 40mm | 80mm | __ | Silver | Zinc | 2 | 20mm | Required | Yes | 00000000 | 0000 |
| 45mm | 90mm | __ | Silver | Zinc | 2 | 20mm | Required | Yes | 00000000 | 0000 |
Concealed brackets mount internally and stay out of sight once installed.
Easy-install tabbed concealed brackets come with a self-tapping screw, so you won't need to tap the end of your rail or drill an acess hole to make 90° and corner connections. Position them anywhere along the length of your rail. Their connections are stronger than corner concealed brackets and tabbed concealed brackets but not quite as strong as anchor brackets.
T-Slotted Framing Mounting Brackets
Attach sensors, tubes, and other components to T-slotted framing rails and structures.
For technical drawings and 3-D models, click on a part number.
End cap mounting plates have a threaded hole to accept attachments such as mounting feet and stem casters. Tap holes in the end of each rail and screw the bracket in to install.
Silver | Black | ||||||
|---|---|---|---|---|---|---|---|
| For Rail Ht. | For Stem Thread Size | Material | Mounting Fasteners Included | Each | Each | ||
For Single Rails | |||||||
| 40mm | M8 × 1.25 mm | Painted Zinc | Yes | 000000 | 00 | 00000000 | 000000 |
| 40mm | M10 × 1.25 mm | Painted Zinc | Yes | 000000 | 00 | 00000000 | 00000 |
For Double Rails | |||||||
| 2" | 1/4"-20 | Powder-Coated Zinc | Yes | 000000 | 00 | 000000000 | 00000 |
| 2" | 3/8"-16 | Powder-Coated Zinc | Yes | 00000000 | 000000 | 000000 | 00 |
| 3" | 3/8"-16 | Powder-Coated Zinc | Yes | 00000000 | 00000 | 000000000 | 00000 |
| 3" | 1/2"-13 | Powder-Coated Zinc | Yes | 00000000 | 00000 | 000000 | 00 |
| 40mm | M6 × 1 mm | Powder-Coated Zinc | Yes | 000000 | 00 | 00000000 | 00000 |
| 60mm | M8 × 1.25 mm | Powder-Coated Zinc | Yes | 000000 | 00 | 00000000 | 00000 |
| 80mm | M8 × 1.25 mm | Powder-Coated Zinc | Yes | 000000 | 00 | 00000000 | 00000 |
| 90mm | M12 × 1.75 mm | Powder-Coated Zinc | Yes | 000000 | 00 | 00000000 | 00000 |
For Quad Rails | |||||||
| 2" | 1/4"-20 | Powder-Coated Zinc | Yes | 000000 | 00 | 000000000 | 00000 |
| 2" | 3/8"-16 | Powder-Coated Zinc | Yes | 00000000 | 00000 | 000000 | 00 |
| 3" | 3/8"-16 | Powder-Coated Zinc | Yes | 000000 | 00 | 000000000 | 00000 |
| 3" | 1/2"-13 | Powder-Coated Zinc | Yes | 00000000 | 00000 | 000000 | 00 |
| 60mm | M8 × 1.25 mm | Powder-Coated Zinc | Yes | 000000 | 00 | 00000000 | 00000 |
| 80mm | M8 × 1.25 mm | Powder-Coated Zinc | Yes | 000000 | 00 | 00000000 | 00000 |
| 90mm | M12 × 1.75 mm | Powder-Coated Zinc | Yes | 000000 | 00 | 00000000 | 00000 |
T-Slotted Framing Panels and Doors
Add panels to T-slotted framing to create machine guards and strip doors.
For technical drawings and 3-D models, click on a part number.
Screw-on panel hangers mount to framing with the included fasteners.
Hangers for glass panels have rubber pads that clamp around the panel. They don’t require machining.
For Rail Ht. | For Solid Panels | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Single | Double, Quad | Triple | Lg. | Wd. | Color | Material | Mounting Fasteners Included | Each | |
Hangers for Glass Panels | |||||||||
Standard | |||||||||
| 1" | 2" | 3" | 1 11/16" | 1" | Silver | Powder-Coated Zinc | Yes | 0000000 | 000000 |
| 1 1/2" | 3" | 4 1/2" | 1 13/16" | 1" | Silver | Powder-Coated Zinc | Yes | 0000000 | 00000 |
| 25mm | 50mm | __ | 1 13/16" | 1" | Silver | Powder-Coated Zinc | Yes | 0000000 | 00000 |
| 40mm | 80mm | 120mm | 1 13/16" | 1" | Silver | Powder-Coated Zinc | Yes | 0000000 | 00000 |
Screw-on panel hangers mount to framing with the included fasteners.
Hangers for perpendicular panels can be used to create a shelf.
For Rail Ht. | For Solid Panels | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Single | Double, Quad | Triple | Lg. | Wd. | Color | Material | Mounting Fasteners Included | Each | |
Hangers for Perpendicular Panels | |||||||||
Standard | |||||||||
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 2 1/4" | 1 3/16" | Silver | Aluminum Coated Zinc | Yes | 0000000 | 000000 |
Lift-off panel hangers can be easily removed for access. To mount a panel, choose fasteners (not included) based on the thickness of your panel.
For Rail Ht. | For Solid Panels | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Single | Double, Quad | Triple | Lg. | Wd. | Color | Material | Mounting Fasteners Included | Each | |
| 1 1/2" | 3" | 4 1/2" | 1 9/16" | 15/16" | Black | Powder-Coated Zinc | Yes | 00000000 | 000000 |
| 1", 30mm | 2", 60mm | 3" | 1 9/16" | 15/16" | Black | Powder-Coated Zinc | Yes | 00000000 | 00000 |
| 40mm, 45mm | 80mm, 90mm | 120mm | 1 9/16" | 15/16" | Black | Powder-Coated Zinc | Yes | 00000000 | 00000 |
T-Slotted Framing Caps, Covers, and Seals
Seal T-slots, rail ends, and gaps between rails to keep out dust, debris, and other contaminants.
For technical drawings and 3-D models, click on a part number.
End caps protect the ends of rails from damage and keep out dust and grime.
Screw-on end caps securely fasten to the end of your rail, so they won’t fall off. Made of metal, these caps are sturdier and more durable than plastic end caps.
End caps protect the ends of rails from damage and keep out dust and grime.
Screw-on end caps securely fasten to the end of your rail, so they won’t fall off. Made of metal, these caps are sturdier and more durable than plastic end caps.
End caps protect the ends of rails from damage and keep out dust and grime.
Screw-on end caps securely fasten to the end of your rail, so they won’t fall off. Made of metal, these caps are sturdier and more durable than plastic end caps.
T-Slotted Framing Pivots
Pivots provide smooth motion at the junction between two T-slotted rails.
Heavy duty pivots have bearings for a longer life than standard pivots. Those with ball bearings are load rated.
Inline/perpendicular pivots provide versatile mounting options. For perpendicular mounting, snap the tabs of the bottom of the pivot with a slotted screwdriver. To install on the end of the rail, tap the end of the rail and align the tabs on the bottom of the pivot with the slot on the rail. Locking inline/perpendicular pivots have a handle that locks in place to position parts or hold doors and lids open.
360° rotation pivots move at any angle adjacent to the rail they are connected to.
For technical drawings and 3-D models, click on a part number.
| For Rail Ht. | Color | Material | Handle Material | Mounting Fasteners Included | Each | |
Inline/Perpendicular Pivots with Straight Arms | ||||||
|---|---|---|---|---|---|---|
L Handles | ||||||
| 1" | Silver | Anodized Zinc | Plastic | Yes | 000000000 | 000000 |
| 1 1/2" | Silver | Anodized Zinc | Plastic | Yes | 000000000 | 00000 |
| 30mm | Silver | Anodized Zinc | Plastic | Yes | 00000000 | 00000 |
| 40mm | Silver | Anodized Zinc | Plastic | Yes | 0000000 | 00000 |
| 45mm | Silver | Anodized Zinc | Plastic | Yes | 00000000 | 00000 |
| For Rail Ht. | Range of Motion | Capacity, lbs. | Color | Material | Bearing Material | Mounting Fasteners Included | Each | |
Inline Pivot with Straight Arms | ||||||||
|---|---|---|---|---|---|---|---|---|
| 40mm | 180° | 165 | Silver | Aluminum Coated Zinc | Steel | Yes | 00000000 | 000000 |
T-Slotted Framing Mounting Feet and Casters
Add mounting feet and casters to T-slotted framing structures to level equipment, anchor legs to the floor, or add mobility.
For technical drawings and 3-D models, click on a part number.
Adjustable-height mounting feet mount to the rail with the included fasteners. Turn the adjustment screw to raise or lower the rail.
Black | Silver | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Rail Ht. | Lg. | Ht. Added | Mounting Fasteners Included | Material | Each | Material | Each | ||
| 1" | 4 3/4" | 0"-1 3/4" | Yes | Powder-Coated Zinc | 000000000 | 000000 | Anodized Zinc | 000000000 | 000000 |
| 1 1/2" | 4 3/4" | 0"-1 3/4" | Yes | Powder-Coated Zinc | 000000000 | 00000 | Anodized Zinc | 000000000 | 00000 |
| 30mm | 4 3/4" | 0"-1 3/4" | Yes | Powder-Coated Zinc | 00000000 | 00000 | Anodized Zinc | 000000000 | 00000 |
| 40mm | 6 1/4" | 0"-1 3/4" | Yes | Powder-Coated Zinc | 00000000 | 00000 | Anodized Zinc | 000000000 | 00000 |
| 45mm | 6 1/4" | 0"-1 3/4" | Yes | Powder-Coated Zinc | 00000000 | 00000 | Anodized Zinc | 000000000 | 00000 |
T-Slotted Framing Locks and Latches
Secure doors and windows made of T-slotted framing to protect valuables or restrict access for safety.
For technical drawings and 3-D models, click on a part number.
T-Slotted Framing Hinges
Use hinges to add doors, lids, and machine guards to T-slotted framing.
Rail-to-rail hinges provide smooth motion at the junction between two rails.
For technical drawings and 3-D models, click on a part number.
Reducer hinges join rails of different heights.
Hinges with a nonremovable pin are reversible and work on left- and right-side doors.
| For Rail Ht. | Color | Material | Lg. | Ht. | Mounting Fasteners Included | Each | |
Nonremovable Pin—Reversible | |||||||
|---|---|---|---|---|---|---|---|
| 45 mm × 30 mm | Black | Powder-Coated Zinc | 2 1/2" | 1" | Yes | 00000000 | 000000 |
Slotted-hole hinges give you some wiggle room when mounting these hinges to your rails, allowing you to customize the position of your rails.
Hinges with a nonremovable pin are reversible and work on left- and right-side doors.
Push-to-Close Latches with Edge-Pull Handle for Sliding Doors
Quickly push to secure sliding doors. An edge-pull handle fits where traditional handles don’t and makes these latches easy to open. Often used on T-slotted framing, they have a two-piece design.
For technical drawings and 3-D models, click on a part number.
Strike Plate | Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Latching Distance | Lg. | Wd. | Projection | Latch Bolt Projection | Wd. | Ht. | Mounting Hole Ctr.-to-Ctr. | Fasteners Included | Screw Size | Hole Ctr.-to-Ctr. | Each | |
Black Powder-Coated Zinc | ||||||||||||
| 1/16" | 2 15/16" | 2 5/8" | 1 3/16" | 1/4" | 15/16" | 2 15/16" | 2 3/16" | No | M6 | 2 3/16" | 0000000 | 000000 |
Push-to-Close Latches with Edge-Pull Handle
An edge-pull handle fits where traditional handles don’t and makes these latches easy to open. Often used on T-slotted framing, these latches have a two-piece design. Quickly push them closed to secure doors. A convenient alternative to cam and draw latches, they don’t require you to turn a cam or pull a latch to close.
For technical drawings and 3-D models, click on a part number.
Strike Plate | Mounting | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Projection | Mounting Hole Ctr.-to-Ctr. | Lg. | Wd. | Mounting Hole Ctr.-to-Ctr. | Fasteners Included | Screw Size | Each | |
Side Handle | ||||||||||
Zinc—Dull | ||||||||||
| 1 3/4" | 2 13/16" | 1 5/16" | 2 3/16" | 1 9/16" | 2 13/16" | 2 3/16" | No | M6 | 0000000 | 000000 |
Black Powder-Coated Zinc | ||||||||||
| 1 3/4" | 2 13/16" | 1 5/16" | 2 3/16" | 1 9/16" | 2 13/16" | 2 3/16" | No | M6 | 0000000 | 00000 |
Center Handle | ||||||||||
Black Painted Zinc | ||||||||||
| 2 3/16" | 2 3/8" | 1 1/8" | 1 5/8" | 15/16" | 2 3/8" | 1 5/8" | No | M6 | 0000000 | 00000 |
Keyed Push-to-Close Locks with Edge-Pull Handle
Pull the edge of the lock to open your door—the low-profile grip fits in tight spaces. Mount one piece of the lock to the face of the door and the other piece to the door opening. These locks are a convenient alternative to cam and draw locks since they don’t require you to turn a cam or pull a latch. They are typically found on t-slotted framing but can be used on any hinged door. Choose them if you need several locks that open with the same key.
For technical drawings and 3-D models, click on a part number.
Strike Plate | Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Latching Distance | Lg. | Wd. | Projection | Material | Lg. | Wd. | Mounting Hole Ctr.-to-Ctr. | Fasteners Included | Screw Size | Hole Ctr.-to-Ctr. | Key No. | No. of Keys Included | Each | |
Side Handle | ||||||||||||||
Black Powder-Coated Zinc | ||||||||||||||
| 1/32" | 4 1/8" | 2 7/8" | 1 5/16" | Zinc | 1 9/16" | 2 7/8" | 2 1/4" | No | M6 | 2 1/4" | 9333 | 2 | 0000000 | 000000 |
Gray Powder-Coated Zinc | ||||||||||||||
| 1/32" | 4 1/8" | 2 7/8" | 1 5/16" | Zinc | 1 9/16" | 2 7/8" | 2 1/4" | No | M6 | 2 1/4" | 9333 | 2 | 0000000 | 00000 |
Center Handle | ||||||||||||||
Black Powder-Coated Zinc | ||||||||||||||
| 1/8" | 3 1/4" | 2 3/8" | 1 1/8" | Zinc | 15/16" | 2 3/8" | 1 11/16" | No | M6 | 1 11/16" | 1333 | 2 | 0000000 | 00000 |
Keyed Push-to-Close Locks with Edge-Pull Handle for Sliding Doors
For use on on sliding doors—including those on T-slotted framing systems—these locks have a two-piece design that locks when pushed closed. An edge-pull handle makes these locks easy to open and fits where traditional handles don’t. Compared to cam and draw locks, these locks are more convenient because they easily latch with a single push.
Choose keyed alike locks when you need several locks that open with the same key. Choose keyed differently locks when you need locks that each open with a different key.
For technical drawings and 3-D models, click on a part number.
Strike Plate | Mounting | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Latching Distance | Lg. | Wd. | Projection | Latch Bolt Projection | Ht. | Wd. | Mounting Hole Ctr.-to-Ctr. | Fasteners Included | Screw Size | Hole Ctr.-to-Ctr. | Key No. | No. of Keys Included | For Use On | Each | |
Keyed Alike | |||||||||||||||
Black Powder-Coated Zinc | |||||||||||||||
| 5/16" | 2 15/16" | 2 5/8" | 1 3/16" | 1/4" | 2 15/16" | 15/16" | 2 3/16" | No | M6 | 2 3/16" | 1333 | 2 | Metal, Wood | 0000000 | 000000 |
Keyed Differently | |||||||||||||||
Black Powder-Coated Zinc | |||||||||||||||
| 5/16" | 2 15/16" | 2 5/8" | 1 3/16" | 1/4" | 2 15/16" | 15/16" | 2 3/16" | No | M6 | 2 3/16" | __ | 2 | Metal, Wood | 0000000 | 00000 |