About Carbon Steel, Alloy Steel, Spring Steel, and Cast Iron
More
About Aluminum
More
Multipurpose 6061 Aluminum T-Bars
- Yield Strength: 35,000 psi
- Hardness: Brinell 80 (Soft)
- Temper: T6
- Fabrication: Extruded
- Specifications Met: ASTM B221
The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Outside | Corner Shape | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Heat Treatment | Temperature Range, °F | Outside | Inside | Leg Edge Shape | Straightness Tolerance | 2 ft. Lg. | 4 ft. Lg. | 8 ft. Lg. | |
0.05" Wall Thick. (-0.006" to 0.006" Tolerance) | |||||||||||||
| 1/2" | -0.014" to 0.014" | 5/8" | -0.024" to 0.024" | Hardened | -320° to 300° | Square | Square | Square | 0.013" per ft. | 0000000 | |||
| 1" | -0.014" to 0.014" | 1 1/2" | -0.024" to 0.024" | Hardened | -320° to 300° | Square | Square | Square | 0.013" per ft. | 0000000 | |||
0.062" Wall Thick. (-0.01" to 0.01" Tolerance) | |||||||||||||
| 3/4" | -0.014" to 0.014" | 1 1/4" | -0.024" to 0.024" | Hardened | -320° to 300° | Round | Round | Round | 0.013" per ft. | 0000000 | |||
| 1" | -0.014" to 0.014" | 1 1/4" | -0.024" to 0.024" | Hardened | -320° to 300° | Round | Round | Round | 0.013" per ft. | 0000000 | |||
| 2" | -0.014" to 0.014" | 1 1/4" | -0.024" to 0.024" | Hardened | -320° to 300° | Square | Square | Square | 0.013" per ft. | 0000000 | |||
1/8" Wall Thick. (-0.007" to 0.007" Tolerance) | |||||||||||||
| 1/4" | -0.014" to 0.014" | 1/2" | -0.024" to 0.024" | Hardened | -320° to 300° | Square | Square | Square | 0.013" per ft. | 0000000 | |||
| 1/2" | -0.014" to 0.014" | 1" | -0.024" to 0.024" | Hardened | -320° to 300° | Square | Square | Square | 0.013" per ft. | 0000000 | |||
| 3/4" | -0.014" to 0.014" | 3/4" | -0.024" to 0.024" | Hardened | -320° to 300° | Square | Square | Square | 0.013" per ft. | 0000000 | |||
| 3/4" | -0.014" to 0.014" | 1 1/2" | -0.024" to 0.024" | Hardened | -320° to 300° | Square | Square | Square | 0.013" per ft. | 0000000 | |||
| 7/8" | -0.014" to 0.014" | 1 1/2" | -0.024" to 0.024" | Hardened | -320° to 300° | Round | Round | Round | 0.013" per ft. | 0000000 | |||
| 1" | -0.014" to 0.014" | 1" | -0.024" to 0.024" | Hardened | -320° to 300° | Square | Square | Square | 0.013" per ft. | 0000000 | |||
| 1" | -0.014" to 0.014" | 2" | -0.024" to 0.024" | Hardened | -320° to 300° | Square | Square | Square | 0.013" per ft. | 0000000 | |||
| 1 1/4" | -0.014" to 0.014" | 2" | -0.024" to 0.024" | Hardened | -320° to 300° | Square | Square | Square | 0.013" per ft. | 0000000 | |||
| 1 1/2" | -0.014" to 0.014" | 1 1/2" | -0.024" to 0.024" | Hardened | -320° to 300° | Square | Square | Square | 0.013" per ft. | 0000000 | |||
| 1 1/2" | -0.014" to 0.014" | 2" | -0.024" to 0.024" | Hardened | -320° to 300° | Square | Square | Square | 0.013" per ft. | 0000000 | |||
| 1 1/2" | -0.014" to 0.014" | 3" | -0.024" to 0.024" | Hardened | -320° to 300° | Square | Square | Square | 0.013" per ft. | 0000000 | |||
0.188" Wall Thick. (-0.007" to 0.007" Tolerance) | |||||||||||||
| 1" | -0.014" to 0.014" | 1" | -0.024" to 0.024" | Hardened | -320° to 300° | Square | Square | Square | 0.013" per ft. | 0000000 | |||
| 1" | -0.014" to 0.014" | 2" | -0.024" to 0.024" | Hardened | -320° to 300° | Square | Square | Square | 0.013" per ft. | 0000000 | |||
| 1 1/2" | -0.014" to 0.014" | 1 1/2" | -0.024" to 0.024" | Hardened | -320° to 300° | Square | Square | Square | 0.013" per ft. | 0000000 | |||
| 1 1/2" | -0.014" to 0.014" | 3" | -0.024" to 0.024" | Hardened | -320° to 300° | Square | Square | Square | 0.013" per ft. | 0000000 | |||
1/4" Wall Thick. (-0.01" to 0.01" Tolerance) | |||||||||||||
| 1 1/2" | -0.014" to 0.014" | 1 1/2" | -0.024" to 0.024" | Hardened | -320° to 300° | Square | Square | Square | 0.013" per ft. | 0000000 | |||
High-Strength 2024 Aluminum T-Bars
- Yield Strength: 42,000 psi
- Hardness: Brinell 120 (Medium)
- Temper: T3511
- Fabrication: Extruded
- Specifications Met: ASTM B221, SAE AMS-QQ-A-200/3
While 2024 aluminum was initially designed for structural components in aircraft, it's now widely used when a high strength-to-weight ratio is needed. It offers similar performance to 7075 aluminum, but it’s not as strong.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Outside | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Heat Treatment | Temperature Range, °F | Straightness Tolerance | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
1/16" Wall Thick. (-0.007" to 0.007" Tolerance) | ||||||||||
| 3/4" | -0.024" to 0.024" | 1 1/2" | -0.014" to 0.014" | Hardened | -320° to 300° | 0.050" per ft. | 0000000 | |||
| 1" | -0.024" to 0.024" | 1 3/8" | -0.014" to 0.014" | Hardened | -320° to 300° | 0.050" per ft. | 0000000 | |||
1/8" Wall Thick. (-0.007" to 0.007" Tolerance) | ||||||||||
| 1" | -0.024" to 0.024" | 2" | -0.024" to 0.024" | Hardened | -320° to 300° | 0.050" per ft. | 0000000 | |||
| 1 1/2" | -0.024" to 0.024" | 3" | -0.024" to 0.024" | Hardened | -320° to 300° | 0.050" per ft. | 0000000 | |||
| 2" | -0.024" to 0.024" | 2 1/2" | -0.024" to 0.024" | Hardened | -320° to 300° | 0.050" per ft. | 0000000 | |||
| 2 1/2" | -0.024" to 0.024" | 3" | -0.024" to 0.024" | Hardened | -320° to 300° | 0.050" per ft. | 0000000 | |||
3/16" Wall Thick. (-0.007" to 0.007" Tolerance) | ||||||||||
| 2" | -0.024" to 0.024" | 2 1/2" | -0.024" to 0.024" | Hardened | -320° to 300° | 0.050" per ft. | 0000000 | |||
| 2" | -0.024" to 0.024" | 3" | -0.024" to 0.024" | Hardened | -320° to 300° | 0.050" per ft. | 0000000 | |||
| 2 1/2" | -0.024" to 0.024" | 3" | -0.024" to 0.024" | Hardened | -320° to 300° | 0.050" per ft. | 0000000 | |||
Multipurpose 304 Stainless Steel
From cookware to chemical-processing equipment, 304 stainless steel is a good all-around choice for a wide range of applications. It maintains its corrosion resistance in temperatures up to 1500° F.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: 30,000 psi
- Hardness: Rockwell B90 (Medium)
- Heat Treatment: Annealed (Softened)
- Heat Treatable: No
- Specifications Met: See Table
Outside | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Inside Ht. | Specifications Met | Inside Corner Shape | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
1/8" Wall Thick. | ||||||||||
| 1" | -0.078" to 0.078" | 1" | -0.078" to 0.078" | 7/8" | ASTM A1069 | Square | 0000000 | |||
3/16" Wall Thick. | ||||||||||
| 1 1/2" | -0.078" to 0.078" | 1 1/2" | -0.078" to 0.078" | 1 5/16" | ASTM A1069 | Square | 0000000 | |||
1/4" Wall Thick. | ||||||||||
| 2" | -0.094" to 0.094" | 2" | -0.094" to 0.094" | 1 3/4" | ASTM A276 | Square | 0000000 | |||
| 3" | -0.141" to 0.141" | 3" | -0.141" to 0.141" | 2 3/4" | ASTM A1069 | Square | 0000000 | |||
3/8" Wall Thick. | ||||||||||
| 4" | -1/8" to 1/8" | 4" | -1/8" to 1/8" | 3 5/8" | ASTM A1069 | Square | 0000000 | |||
Low-Carbon Steel T-Bars
- Yield Strength: 36,000 psi
- Hardness: Not Rated (Medium)
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: Not Rated
- Specifications Met: ASTM A36
Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength, such as fixture clamps, mounting plates, and spacers. This material can be surface hardened with heat treating.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Ceiling Tile Frames
Use these components to design your own frame to support ceiling tiles.
Steel frames are approved for use in UL fire-rated ceiling assemblies. Some also comply with ICC-ES standards for use in seismic-rated assemblies.
Aluminum frames are corrosion resistant and withstand higher humidity than steel.
Fiberglass-reinforced plastic frames are safe to use in food and dairy plants. Nonmagnetic, they’re also good to install in hospitals and labs that use MRI technology. These frames won’t conduct heat and electricity, unlike metal frames, reducing the risk of injury from electric hazards. All are approved for use in UL fire-rated ceiling assemblies. They also meet ICC-ES seismic standards. You can clean these frames with mild detergents—they won’t corrode.
For technical drawings and 3-D models, click on a part number.
Frames | PVC Plastic Cross Clips | PVC Plastic Cross Lock Clips | PVC Plastic Straight Clips | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | Wd. | Color | Each | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||||
| 2 | 1 3/8" | White | 0000000 | 000000 | 1 | 0000000 | 00000 | __ | 000000 | 00 | __ | 000000 | 00 |
| 4 | 1 3/8" | White | 0000000 | 00000 | 1 | 0000000 | 0000 | __ | 000000 | 00 | __ | 000000 | 00 |
| 12 | 1 3/8" | White | 0000000 | 00000 | 1 | 0000000 | 0000 | 1 | 0000000 | 00000 | 1 | 0000000 | 00000 |
Ceiling Tile Clips
Secure ceiling tiles or join ceiling tile frame components.
Clips for ceiling tiles keep ceiling tiles in place. Those for 1/16"-5/8" ceiling tiles are best for entryways and other drafty areas.
Clips for ceiling tile frames join ceiling tile frames and molding. Cross clips connect cross tees to main beams. For those with a 1” notch depth, use cross-lock clips to secure them in place. Both clips help you comply with ICC-ES seismic requirements when fastened with pop rivets. Use cross clips with a 1 9/32” notch depth to install lights or vents to beams where there isn’t a notch. Straight clips attach two main beams. When installed with pop rivets, these clips help you meet ICC-ES seismic standards. Tee clips join molding to main beams and cross tees. Those for 9/16”-15/16” ceiling tile frames help you comply with ICC-ES seismic requirements when properly installed.
PVC plastic clips must be used with fiberglass-reinforced plastic ceiling tile frames and molding.
| Material | For Ceiling Tile Frame Thick. | Notch Depth | Pkg. Qty. | Pkg. | |
Cross Clip | |||||
|---|---|---|---|---|---|
| PVC Plastic | 3/32" | 1" | 1 | 0000000 | 00000 |
| PVC Plastic | 3/32" | 1 9/32" | 1 | 0000000 | 0000 |
Cross Lock Clip | |||||
| PVC Plastic | 3/32" | __ | 1 | 0000000 | 0000 |
Straight Clip | |||||
| PVC Plastic | 3/32" | __ | 1 | 0000000 | 0000 |
Tee Clip | |||||
| Galvanized Steel | 9/16"-15/16" | __ | 1 | 00000000 | 0000 |
Aluminum | 15/16" | __ | 1 | 00000000 | 0000 |
| PVC Plastic | 3/32" | __ | 1 | 0000000 | 0000 |
Ceiling Tile Framing Covers
Instead of painting or replacing ceiling tile frames when they’re rusted and discolored, put these flexible PVC covers onto them for a clean appearance. They’re sized to fit most framing systems. If you’re using them with ceiling tiles with recessed edges, make sure the width of the covers will fit the recess.
Rated ASTM E84 Class A, their ability to limit the spread of flames and generation of smoke conforms to the highest classification. They also meet UL 94 V-0, which means they’ll self-extinguish within 10 seconds and won’t spread fire by dripping.
To cover your framing’s perimeter, use wall covers. They slide onto framing where the ceiling and wall meet.
To cover your framing’s interior grid, you may need both standard and tee covers. Standard covers have a notch in the middle that covers the seams where two tee covers meet. They’re compatible with both 2' × 2' and 2' × 4' ceiling tiles. When used with 2' × 4' tiles, install them on the 2' side. Tee covers run perpendicular to standard covers to create a tee.
For a proper fit, choose covers for 1" wd. framing if your current 15/16" wd. framing already has a thick coating of paint.
For technical drawings and 3-D models, click on a part number.
| For Length, ft. | For Width | Length | Width | Thickness | Material | Color | Specifications Met | Pkg. Qty. | Pkg. | |
Snap On | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Wall | ||||||||||
| 4 | 15/16", 1" | 48" | 1" | 1/8" | PVC Plastic | White | NFPA 101 Class A, UL 94 V-0 | 25 | 000000000 | 000000 |
Standard | ||||||||||
| 4 | 15/16" | 48" | 1" | 1/8" | PVC Plastic | White | NFPA 101 Class A, UL 94 V-0 | 25 | 000000000 | 00000 |
| 4 | 1" | 48" | 1 1/8" | 1/8" | PVC Plastic | White | NFPA 101 Class A, UL 94 V-0 | 25 | 000000000 | 00000 |
Tee | ||||||||||
| 2 | 15/16" | 23" | 1" | 1/8" | PVC Plastic | White | NFPA 101 Class A, UL 94 V-0 | 25 | 000000000 | 00000 |
| 2 | 1" | 23" | 1 1/8" | 1/8" | PVC Plastic | White | NFPA 101 Class A, UL 94 V-0 | 25 | 000000000 | 00000 |
| 4 | 15/16" | 47" | 1" | 1/8" | PVC Plastic | White | NFPA 101 Class A, UL 94 V-0 | 25 | 000000000 | 00000 |
| 4 | 1" | 47" | 1 1/8" | 1/8" | PVC Plastic | White | NFPA 101 Class A, UL 94 V-0 | 25 | 000000000 | 00000 |
Ceiling Tile Wall Molding
Secure tile frames to the wall.
Aluminum molding is corrosion resistant and withstands higher humidity than steel.
Use fiberglass-reinforced plastic molding in food and dairy plants—paint free, it won’t blister or peel onto your product. Because it’s nonmagnetic, it’s also safe to install in hospitals and labs with MRI technology. Unlike metal molding, this molding won’t conduct heat and electricity, so it reduces the risk of injury from electric hazards. It complies with ICC-ES seismic standards when installed with pop rivets. It’s also approved for use in UL fire-rated ceiling assemblies. You can clean this molding with mild detergents and it won’t corrode.
For technical drawings and 3-D models, click on a part number.
| Material | For Ceiling Tile Thickness | For Use With | Pkg. Qty. | Pkg. | |
| Galvanized Steel | 1/16"-5/8" | Ceiling Tiles | 10 | 00000000 | 000000 |
| Material | Length | Pkg. Qty. | Steel Wire Gauge | Pkg. | |
| Steel | 12 ft. | 10 | 12.0 ga. | 00000000 | 000000 |