Thanks to the nickel-plated brass base on these needles, they can be cleaned, washed, boiled, or sterilized. Attach them to syringes with luer lock or luer slip connection types to dispense liquids.

Needles with a flat tip are the most commonly used and suitable for most applications. They dispense a flat, even bead of liquid.

Often used with septa lids, needles with a beveled tip can be inserted without the needle clogging or leaving a hole. 15° angled needles are good for hard-to-reach areas.

For technical drawings and 3-D models, click on a part number.

Curve these plastic needles to reach into tight spots. They can be cut to the length you need. Unlike metal needles, they’re less likely to clog from instant-bonding adhesives and other sticky liquids. They also won’t scratch your surface when dispensing. Attach them to syringes with luer lock connections.

PTFE needles resist chemicals better than polypropylene needles.

For technical drawings and 3-D models, click on a part number.

To protect sensitive equipment, these needles drain electrostatic discharge (ESD) from the materials they dispense. That means they’re great for applying adhesives to electronics. For a complete static-control syringe, you’ll need one with a static-control barrel. Twist them onto a syringe with a luer lock or luer slip connection. With a flat tip, they’re good for most applications and dispense a flat, even bead of material.

For technical drawings and 3-D models, click on a part number.

Connect these needles to adhesive cartridges, grease guns, and other dispensers with a threaded connection. They can be cleaned, washed, boiled, or sterilized.

Often used with septa lids, sharp beveled needles can be inserted without the needle clogging or leaving a hole. Not for animal or human use.

45° and 90° angled needles are good for hard-to-reach areas.

For technical drawings and 3-D models, click on a part number.