How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
About Hose
More
Swivel On/Off Valves with Garden Hose Threads
Extend the life of your garden hose. This fitting swivels 360° to prevent the hose from kinking.
For technical drawings and 3-D models, click on a part number.
Max. Pressure | Temp. Range | Includes | Each | |
Brass | ||||
---|---|---|---|---|
Not Rated | Not Rated | Washers | 00000000 | 00000 |
Threaded Hose Fittings for Hydraulic Fluid
Fittings are threaded on both ends so you can connect them directly to a threaded hose or to pumps, cylinders, and other equipment in your hydraulic system.
Zinc-plated steel fittings are stronger and more durable than stainless steel fittings. They have fair corrosion resistance. 316 stainless steel fittings have excellent corrosion resistance.
Fittings that swivel until tightened rotate for easy installation.
NPTF (Dryseal) threads are compatible with NPT threads. NPSM (National Pipe Straight Mechanical) female threads are compatible with male NPT and NPTF threads.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: See table
- Temperature Range:
Zinc-Plated Steel: Not Rated
316 Stainless Steel: -425° to 1200° F
Pipe Size | Dash Size | Max. Pressure | Each | |
Zinc-Plated Steel | ||||
---|---|---|---|---|
1/8 | 02 | 5,000 psi @ 72° F | 0000000 | 00000 |
1/4 | 04 | 3,000 psi @ 72° F | 000000 | 0000 |
3/8 | 06 | 3,000 psi @ 72° F | 0000000 | 0000 |
1/2 | 08 | 2,000 psi @ 72° F | 0000000 | 0000 |
3/4 | 12 | 2,000 psi @ 72° F | 0000000 | 00000 |
1 | 16 | 2,000 psi @ 72° F | 00000000 | 00000 |
316 Stainless Steel | ||||
1/4 | 04 | 5,000 psi @ 72° F | 0000000 | 00000 |
3/8 | 06 | 4,000 psi @ 72° F | 0000000 | 00000 |
1/2 | 08 | 3,500 psi @ 72° F | 0000000 | 00000 |
3/4 | 12 | 2,000 psi @ 72° F | 0000000 | 000000 |
1 | 16 | 2,000 psi @ 72° F | 0000000 | 000000 |
Push-On Barbed Hose Fittings for Hydraulic Fluid
These fittings have sharp barbs to grip rubber push-on hose with no clamps or ferrules required. The more you pull on the fittings, the tighter the hose will grip. Use them in low-pressure hydraulic applications up to 350 psi. Also known as hose nipples, they adapt a barbed end to a threaded end, so you can connect to pumps, cylinders, and other equipment in your hydraulic system. Fittings are zinc-plated steel, which has excellent strength and durability. Fittings have fair corrosion resistance.
Fittings that swivel until tightened rotate 360° for easy installation.
Fittings with a 37° flared end are also known as JIC (Joint Industrial Council) fittings.
Note: To ensure proper connection, the barbed end has to be pushed in all the way, with the hose end concealed by the ring.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: See table
- Maximum Vacuum: See Table
- Temperature Range: -40° to 255° F
- For Hose Manufacturer Series: Parker 801
Fittings | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Ring Stop | 10-ft. Hose | |||||||||||
For Hose ID | For Tube OD | Thread Size | Dash Size | Material | Color | Max. Pressure | Max. Vacuum | Manufacturer Series | Each | Each | ||
Zinc-Plated Steel | ||||||||||||
1/4" | 1/4" | 7/16"-20 | 04 | Plastic | Yellow | 350 psi @ 72° F | 28 in. of Hg @ 72° F | Parker 82 | 0000000 | 000000 | 0000000 | 000000 |
3/8" | 3/8" | 9/16"-18 | 06 | Plastic | Yellow | 350 psi @ 72° F | 28 in. of Hg @ 72° F | Parker 82 | 0000000 | 00000 | 0000000 | 00000 |
1/2" | 1/2" | 3/4"-16 | 08 | Plastic | Yellow | 300 psi @ 72° F | 28 in. of Hg @ 72° F | Parker 82 | 0000000 | 00000 | 0000000 | 00000 |
5/8" | 5/8" | 7/8"-14 | 10 | Plastic | Yellow | 300 psi @ 72° F | 15 in. of Hg @ 72° F | Parker 82 | 0000000 | 00000 | 00000000 | 00000 |
Universal-Thread Push-to-Connect Tube Fittings for Air and Water
Threads
with Gasket
- Temperature Range: 0° to 175° F
- Tubing: Use with firm (Durometer 85A-100A) nylon plastic or polyurethane rubber
- Specifications Met: ISO 14743
Make lightweight connections without the hassle of matching the exact thread type—these fittings connect to NPT, NPTF, BSPP, BSPT, and other universal threads. With a nylon body and nickel-plated brass threads, these fittings are lighter than most metal fittings, and withstand corrosion better than plain brass threads. They also have a reusable gasket to guard against leaks. Connect the tube ends to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. To disconnect them, push the release ring and pull the tubing out of the fitting. These fittings are sometimes known as instant fittings. All meet ISO 14743, which is an international standard for push-to-connect fittings for plastic tubing.
For technical drawings and 3-D models, click on a part number.
Threads
with Gasket
Release Ring | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For Tube OD | Pipe Size | Tube Connection Material | Pipe Connection Material | Gasket Material | Color | Material | Color | Maximum Pressure | Each | |
BSPP, BSPT, NPT, NPTF, Universal Threads | ||||||||||
5/32" | 1/8 | Nylon Plastic | Nickel-Plated Brass | Buna-N Rubber | Black | Plastic | Blue | 250 psi @ 72° F | 0000000 | 00000 |
1/4" | 1/8 | Nylon Plastic | Nickel-Plated Brass | Buna-N Rubber | Black | Plastic | Blue | 250 psi @ 72° F | 0000000 | 0000 |
1/4" | 1/4 | Nylon Plastic | Nickel-Plated Brass | Buna-N Rubber | Black | Plastic | Blue | 250 psi @ 72° F | 0000000 | 0000 |
5/16" | 1/8 | Nylon Plastic | Nickel-Plated Brass | Buna-N Rubber | Black | Plastic | Blue | 250 psi @ 72° F | 0000000 | 0000 |
5/16" | 1/4 | Nylon Plastic | Nickel-Plated Brass | Buna-N Rubber | Black | Plastic | Blue | 250 psi @ 72° F | 0000000 | 0000 |
5/16" | 3/8 | Nylon Plastic | Nickel-Plated Brass | Buna-N Rubber | Black | Plastic | Blue | 250 psi @ 72° F | 0000000 | 0000 |
3/8" | 1/4 | Nylon Plastic | Nickel-Plated Brass | Buna-N Rubber | Black | Plastic | Blue | 250 psi @ 72° F | 0000000 | 0000 |
3/8" | 3/8 | Nylon Plastic | Nickel-Plated Brass | Buna-N Rubber | Black | Plastic | Blue | 250 psi @ 72° F | 0000000 | 0000 |
3/8" | 1/2 | Nylon Plastic | Nickel-Plated Brass | Buna-N Rubber | Black | Plastic | Blue | 250 psi @ 72° F | 0000000 | 00000 |
1/2" | 1/4 | Nylon Plastic | Nickel-Plated Brass | Buna-N Rubber | Black | Plastic | Blue | 250 psi @ 72° F | 0000000 | 0000 |
1/2" | 3/8 | Nylon Plastic | Nickel-Plated Brass | Buna-N Rubber | Black | Plastic | Blue | 250 psi @ 72° F | 0000000 | 0000 |
1/2" | 1/2 | Nylon Plastic | Nickel-Plated Brass | Buna-N Rubber | Black | Plastic | Blue | 250 psi @ 72° F | 0000000 | 00000 |
4mm | 1/8 | Nylon Plastic | Nickel-Plated Brass | Buna-N Rubber | Black | Plastic | Black | 250 psi @ 72° F | 00000000 | 0000 |
6mm | 1/8 | Nylon Plastic | Nickel-Plated Brass | Buna-N Rubber | Black | Plastic | Black | 250 psi @ 72° F | 00000000 | 0000 |
6mm | 1/4 | Nylon Plastic | Nickel-Plated Brass | Buna-N Rubber | Black | Plastic | Black | 250 psi @ 72° F | 00000000 | 0000 |
8mm | 1/8 | Nylon Plastic | Nickel-Plated Brass | Buna-N Rubber | Black | Plastic | Black | 250 psi @ 72° F | 00000000 | 0000 |
8mm | 1/4 | Nylon Plastic | Nickel-Plated Brass | Buna-N Rubber | Black | Plastic | Black | 250 psi @ 72° F | 00000000 | 0000 |
8mm | 3/8 | Nylon Plastic | Nickel-Plated Brass | Buna-N Rubber | Black | Plastic | Black | 250 psi @ 72° F | 00000000 | 0000 |
10mm | 1/4 | Nylon Plastic | Nickel-Plated Brass | Buna-N Rubber | Black | Plastic | Black | 250 psi @ 72° F | 00000000 | 0000 |
10mm | 3/8 | Nylon Plastic | Nickel-Plated Brass | Buna-N Rubber | Black | Plastic | Black | 250 psi @ 72° F | 00000000 | 0000 |
10mm | 1/2 | Nylon Plastic | Nickel-Plated Brass | Buna-N Rubber | Black | Plastic | Black | 250 psi @ 72° F | 00000000 | 0000 |
12mm | 1/4 | Nylon Plastic | Nickel-Plated Brass | Buna-N Rubber | Black | Plastic | Black | 250 psi @ 72° F | 00000000 | 0000 |
12mm | 3/8 | Nylon Plastic | Nickel-Plated Brass | Buna-N Rubber | Black | Plastic | Black | 250 psi @ 72° F | 00000000 | 0000 |
12mm | 1/2 | Nylon Plastic | Nickel-Plated Brass | Buna-N Rubber | Black | Plastic | Black | 250 psi @ 72° F | 00000000 | 00000 |
Push-to-Connect Tube Fittings for Air
UN/UNF (SAE Straight)
Male Threads with Gasket
- Temperature Range: 0° to 170° F, except polybutylene plastic fittings are 32° to 140° F
- Tubing: Use with firm (Durometer 95A-45D) polyethylene plastic or polyurethane rubber
- Specifications Met: ISO 14743, except cartridges and polybutylene plastic fittings
Insert tubing into these fittings and an internal gripping ring and O-ring hold the tubing tight. They are also known as instant fittings. To disconnect, push on the release ring and pull the tubing out of the fitting. Fittings have good corrosion resistance. Use them in low-pressure applications.
Identification rings (sold separately) snap over the release ring so you can color-code your lines.
Clips (sold separately) align and organize your tubing and fittings.
Fittings with PTFE thread sealant offer extra protection against leaks.
Metric male threads have either a gasket or a thread sealant to protect against leaks. BSPP and UN/UNF (SAE Straight) male threads have a gasket to protect against leaks. UN/UNF (SAE Straight) threads are also known as O-ring boss threads.
For technical drawings and 3-D models, click on a part number.
UN/UNF (SAE Straight)
Male Threads with Gasket
Fittings with intermittent swivel rotate 360° before and after installation as needed to allow movement in the system and to prevent kinking.
For Tube OD | Pipe Size | Thread Size | Thread Pitch, mm | Tube Connection Material | Pipe Connection Material | Gasket Material | Color | Release Ring Color | Max. Pressure | Features | Each | |
NPT Threads | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
1/8" | 1/16 | __ | __ | Nylon Plastic | Nickel-Plated Brass | __ | Black | Black | 290 psi @ 72° F | PTFE Thread Sealant | 00000000 | 000000 |
1/8" | 1/8 | __ | __ | Nylon Plastic | Nickel-Plated Brass | __ | Black | Black | 290 psi @ 72° F | PTFE Thread Sealant | 00000000 | 0000 |
1/8" | 1/4 | __ | __ | Nylon Plastic | Nickel-Plated Brass | __ | Black | Black | 290 psi @ 72° F | PTFE Thread Sealant | 00000000 | 00000 |
5/32" | 1/8 | __ | __ | Nylon Plastic | Nickel-Plated Brass | __ | Black | Black | 290 psi @ 72° F | PTFE Thread Sealant | 00000000 | 00000 |
5/32" | 1/4 | __ | __ | Nylon Plastic | Nickel-Plated Brass | __ | Black | Black | 290 psi @ 72° F | PTFE Thread Sealant | 00000000 | 00000 |
3/16" | 1/8 | __ | __ | Nylon Plastic | Nickel-Plated Brass | __ | Black | Black | 290 psi @ 72° F | PTFE Thread Sealant | 00000000 | 00000 |
1/4" | 1/8 | __ | __ | Nylon Plastic | Nickel-Plated Brass | __ | Black | Black | 290 psi @ 72° F | PTFE Thread Sealant | 00000000 | 0000 |
1/4" | 1/4 | __ | __ | Nylon Plastic | Nickel-Plated Brass | __ | Black | Black | 290 psi @ 72° F | PTFE Thread Sealant | 00000000 | 0000 |
1/4" | 3/8 | __ | __ | Nylon Plastic | Nickel-Plated Brass | __ | Black | Black | 290 psi @ 72° F | PTFE Thread Sealant | 00000000 | 00000 |
5/16" | 1/8 | __ | __ | Nylon Plastic | Nickel-Plated Brass | __ | Black | Black | 290 psi @ 72° F | PTFE Thread Sealant | 00000000 | 00000 |
5/16" | 1/4 | __ | __ | Nylon Plastic | Nickel-Plated Brass | __ | Black | Black | 290 psi @ 72° F | PTFE Thread Sealant | 00000000 | 00000 |
5/16" | 3/8 | __ | __ | Nylon Plastic | Nickel-Plated Brass | __ | Black | Black | 290 psi @ 72° F | PTFE Thread Sealant | 00000000 | 00000 |
3/8" | 1/8 | __ | __ | Nylon Plastic | Nickel-Plated Brass | __ | Black | Black | 290 psi @ 72° F | PTFE Thread Sealant | 00000000 | 00000 |
3/8" | 1/4 | __ | __ | Nylon Plastic | Nickel-Plated Brass | __ | Black | Black | 290 psi @ 72° F | PTFE Thread Sealant | 00000000 | 0000 |
3/8" | 3/8 | __ | __ | Nylon Plastic | Nickel-Plated Brass | __ | Black | Black | 290 psi @ 72° F | PTFE Thread Sealant | 00000000 | 00000 |
3/8" | 1/2 | __ | __ | Nylon Plastic | Nickel-Plated Brass | __ | Black | Black | 290 psi @ 72° F | PTFE Thread Sealant | 00000000 | 00000 |
Metric Threads | ||||||||||||
4mm | __ | M5 | 0.8 | Nylon Plastic | Nickel-Plated Brass | Buna-N Rubber | Black | Black | 290 psi @ 72° F | __ | 00000000 | 0000 |
6mm | __ | M5 | 0.8 | Nylon Plastic | Nickel-Plated Brass | Buna-N Rubber | Black | Black | 290 psi @ 72° F | __ | 00000000 | 0000 |
BSPP Threads | ||||||||||||
4mm | 1/8 | __ | __ | Nylon Plastic | Nickel-Plated Brass | Buna-N Rubber | Black | Black | 290 psi @ 72° F | __ | 00000000 | 0000 |
6mm | 1/8 | __ | __ | Nylon Plastic | Nickel-Plated Brass | Buna-N Rubber | Black | Black | 290 psi @ 72° F | __ | 00000000 | 0000 |
6mm | 1/4 | __ | __ | Nylon Plastic | Nickel-Plated Brass | Buna-N Rubber | Black | Black | 290 psi @ 72° F | __ | 00000000 | 0000 |
8mm | 1/8 | __ | __ | Nylon Plastic | Nickel-Plated Brass | Buna-N Rubber | Black | Black | 290 psi @ 72° F | __ | 00000000 | 0000 |
8mm | 1/4 | __ | __ | Nylon Plastic | Nickel-Plated Brass | Buna-N Rubber | Black | Black | 290 psi @ 72° F | __ | 00000000 | 0000 |
8mm | 3/8 | __ | __ | Nylon Plastic | Nickel-Plated Brass | Buna-N Rubber | Black | Black | 290 psi @ 72° F | __ | 00000000 | 00000 |
10mm | 1/4 | __ | __ | Nylon Plastic | Nickel-Plated Brass | Buna-N Rubber | Black | Black | 290 psi @ 72° F | __ | 00000000 | 00000 |
10mm | 3/8 | __ | __ | Nylon Plastic | Nickel-Plated Brass | Buna-N Rubber | Black | Black | 290 psi @ 72° F | __ | 00000000 | 00000 |
12mm | 1/4 | __ | __ | Nylon Plastic | Nickel-Plated Brass | Buna-N Rubber | Black | Black | 290 psi @ 72° F | __ | 00000000 | 00000 |
12mm | 3/8 | __ | __ | Nylon Plastic | Nickel-Plated Brass | Buna-N Rubber | Black | Black | 290 psi @ 72° F | __ | 00000000 | 00000 |
12mm | 1/2 | __ | __ | Nylon Plastic | Nickel-Plated Brass | Buna-N Rubber | Black | Black | 290 psi @ 72° F | __ | 00000000 | 00000 |
BSPT Threads | ||||||||||||
4mm | 1/8 | __ | __ | Nylon Plastic | Nickel-Plated Brass | __ | Black | Black | 290 psi @ 72° F | PTFE Thread Sealant | 00000000 | 0000 |
6mm | 1/8 | __ | __ | Nylon Plastic | Nickel-Plated Brass | __ | Black | Black | 290 psi @ 72° F | PTFE Thread Sealant | 00000000 | 0000 |
6mm | 1/4 | __ | __ | Nylon Plastic | Nickel-Plated Brass | __ | Black | Black | 290 psi @ 72° F | PTFE Thread Sealant | 00000000 | 0000 |
8mm | 1/8 | __ | __ | Nylon Plastic | Nickel-Plated Brass | __ | Black | Black | 290 psi @ 72° F | PTFE Thread Sealant | 00000000 | 0000 |
8mm | 1/4 | __ | __ | Nylon Plastic | Nickel-Plated Brass | __ | Black | Black | 290 psi @ 72° F | PTFE Thread Sealant | 00000000 | 0000 |
8mm | 3/8 | __ | __ | Nylon Plastic | Nickel-Plated Brass | __ | Black | Black | 290 psi @ 72° F | PTFE Thread Sealant | 00000000 | 00000 |
10mm | 1/4 | __ | __ | Nylon Plastic | Nickel-Plated Brass | __ | Black | Black | 290 psi @ 72° F | PTFE Thread Sealant | 00000000 | 00000 |
10mm | 3/8 | __ | __ | Nylon Plastic | Nickel-Plated Brass | __ | Black | Black | 290 psi @ 72° F | PTFE Thread Sealant | 00000000 | 00000 |
10mm | 1/2 | __ | __ | Nylon Plastic | Nickel-Plated Brass | __ | Black | Black | 290 psi @ 72° F | PTFE Thread Sealant | 00000000 | 00000 |
12mm | 1/4 | __ | __ | Nylon Plastic | Nickel-Plated Brass | __ | Black | Black | 290 psi @ 72° F | PTFE Thread Sealant | 00000000 | 00000 |
12mm | 3/8 | __ | __ | Nylon Plastic | Nickel-Plated Brass | __ | Black | Black | 290 psi @ 72° F | PTFE Thread Sealant | 00000000 | 00000 |
12mm | 1/2 | __ | __ | Nylon Plastic | Nickel-Plated Brass | __ | Black | Black | 290 psi @ 72° F | PTFE Thread Sealant | 00000000 | 00000 |
UN/UNF (SAE Straight) Threads | ||||||||||||
1/8" | __ | 10-32 | __ | Nylon Plastic | Nickel-Plated Brass | Buna-N Rubber | Black | Black | 290 psi @ 72° F | __ | 00000000 | 00000 |
5/32" | __ | 10-32 | __ | Nylon Plastic | Nickel-Plated Brass | Buna-N Rubber | Black | Black | 290 psi @ 72° F | __ | 00000000 | 00000 |
1/4" | __ | 10-32 | __ | Nylon Plastic | Nickel-Plated Brass | Buna-N Rubber | Black | Black | 290 psi @ 72° F | __ | 00000000 | 00000 |
For Tube OD | Material | Choose a Color | Each | |
1/8" | Nylon Plastic | Yellow | 00000000 | 00000 |
5/32" | Nylon Plastic | 00000000 | 000 | |
3/16" | Nylon Plastic | 00000000 | 000 | |
1/4" | Nylon Plastic | 00000000 | 000 | |
5/16" | Nylon Plastic | 00000000 | 000 | |
3/8" | Nylon Plastic | 00000000 | 000 | |
6mm | Nylon Plastic | 00000000 | 000 | |
10mm | Nylon Plastic | 00000000 | 0000 | |
12mm | Nylon Plastic | 00000000 | 0000 |
Low-Temperature/High-Pressure D.O.T. Push-to-Connect Tube Fittings for Air
- Temperature Range: -40° to 200° F
- Tubing: Use with hard (Durometer 65D) nylon plastic
- Specifications Met:
Cartridges: D.O.T. FMVSS 571, SAE J2494-4, SAE J1131
All other fittings: D.O.T. FMVSS 571
Connect high-pressure brake lines with fittings that won’t crack in frigid temperatures. Often used on commercial trucks and trailers, these fittings meet Department of Transportation FMVSS 571 safety standards. Also known as instant fittings, they connect to tubing with a simple push, and an internal gripping ring and O-ring will hold the tubing tight. A built-in tube support slips inside the tubing to prevent it from collapsing. To disconnect, push on the release ring and pull the tubing out of the fitting. All have good corrosion resistance.
Metric male threads have a gasket to protect against leaks.
For technical drawings and 3-D models, click on a part number.
Fittings with intermittent swivel rotate 360° before and after installation as needed to allow movement in the system and to prevent kinking.
Thread | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For Tube OD | Pipe Size | Size | Pitch, mm | Tube Connection Material | Pipe Connection Material | Gasket Material | Color | Release Ring Material | Max. Pressure | Each | |
NPT Threads | |||||||||||
1/4" | 1/8 | __ | __ | Nylon Plastic | Brass | __ | Black | Brass | 250 psi @ 72° F | 00000000 | 00000 |
1/4" | 1/4 | __ | __ | Nylon Plastic | Brass | __ | Black | Brass | 250 psi @ 72° F | 00000000 | 0000 |
3/8" | 1/4 | __ | __ | Nylon Plastic | Brass | __ | Black | Brass | 250 psi @ 72° F | 00000000 | 00000 |
3/8" | 3/8 | __ | __ | Nylon Plastic | Brass | __ | Black | Brass | 250 psi @ 72° F | 00000000 | 00000 |
1/2" | 3/8 | __ | __ | Nylon Plastic | Brass | __ | Black | Brass | 250 psi @ 72° F | 00000000 | 00000 |
1/2" | 1/2 | __ | __ | Nylon Plastic | Brass | __ | Black | Brass | 250 psi @ 72° F | 00000000 | 00000 |
Metric Threads | |||||||||||
1/4" | __ | M12 | 1.5 | Nylon Plastic | Brass | Buna-N Rubber | Black | Brass | 250 psi @ 72° F | 00000000 | 00000 |
1/4" | __ | M16 | 1.5 | Nylon Plastic | Brass | Buna-N Rubber | Black | Brass | 250 psi @ 72° F | 00000000 | 00000 |
1/4" | __ | M22 | 1.5 | Nylon Plastic | Brass | Buna-N Rubber | Black | Brass | 250 psi @ 72° F | 00000000 | 00000 |
3/8" | __ | M12 | 1.5 | Nylon Plastic | Brass | Buna-N Rubber | Black | Brass | 250 psi @ 72° F | 00000000 | 00000 |
3/8" | __ | M16 | 1.5 | Nylon Plastic | Brass | Buna-N Rubber | Black | Brass | 250 psi @ 72° F | 00000000 | 00000 |
3/8" | __ | M22 | 1.5 | Nylon Plastic | Brass | Buna-N Rubber | Black | Brass | 250 psi @ 72° F | 00000000 | 00000 |
1/2" | __ | M12 | 1.5 | Nylon Plastic | Brass | Buna-N Rubber | Black | Brass | 250 psi @ 72° F | 00000000 | 00000 |
1/2" | __ | M16 | 1.5 | Nylon Plastic | Brass | Buna-N Rubber | Black | Brass | 250 psi @ 72° F | 00000000 | 00000 |
1/2" | __ | M22 | 1.5 | Nylon Plastic | Brass | Buna-N Rubber | Black | Brass | 250 psi @ 72° F | 00000000 | 00000 |
5/8" | __ | M12 | 1.5 | Nylon Plastic | Brass | Buna-N Rubber | Black | Brass | 250 psi @ 72° F | 00000000 | 00000 |
5/8" | __ | M16 | 1.5 | Nylon Plastic | Brass | Buna-N Rubber | Black | Brass | 250 psi @ 72° F | 00000000 | 00000 |
5/8" | __ | M22 | 1.5 | Nylon Plastic | Brass | Buna-N Rubber | Black | Brass | 250 psi @ 72° F | 00000000 | 00000 |
Low-Temperature D.O.T. Push-to-Connect Tube Fittings for Air
- Temperature Range: -40° to 210° F
- Tubing: Use with hard (Durometer 65D) nylon plastic
- Specifications Met: D.O.T. FMVSS 571, SAE J1131, SAE J2494-1, SAE J2494-3
except Identification Rings: D.O.T. FMVSS 571
Connect air brake lines with fittings that won’t crack in sub-zero temperatures. They meet Department of Transportation FMVSS 571 safety standards, so they’re often used in commercial trucks and trailers. Also known as instant fittings, they connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. Fittings have a built-in tube support that slips inside the tubing to prevent it from collapsing. To disconnect, push on the release ring and pull the tubing out of the fitting. They have good corrosion resistance. Use them at up to 150 psi and attach them to hard tubing.
NPTF (Dryseal) threads are compatible with NPT threads. The male threads have an acrylic sealant applied to protect against leaks.
For technical drawings and 3-D models, click on a part number.
Fittings with intermittent swivel rotate 360° before and after installation as needed to allow movement in the system and to prevent kinking.
For Tube OD | Pipe Size | Material | Max. Pressure | Features | Each | |
NPTF Threads | ||||||
---|---|---|---|---|---|---|
1/4" | 1/8 | Brass | 150 psi @ 72° F | Acrylic Thread Sealant | 00000000 | 00000 |
1/4" | 1/4 | Brass | 150 psi @ 72° F | Acrylic Thread Sealant | 00000000 | 0000 |
3/8" | 1/4 | Brass | 150 psi @ 72° F | Acrylic Thread Sealant | 00000000 | 00000 |
3/8" | 3/8 | Brass | 150 psi @ 72° F | Acrylic Thread Sealant | 00000000 | 00000 |
1/2" | 3/8 | Brass | 150 psi @ 72° F | Acrylic Thread Sealant | 00000000 | 00000 |
1/2" | 1/2 | Brass | 150 psi @ 72° F | Acrylic Thread Sealant | 000000000 | 00000 |
Color-code your lines by snapping one of these rings over the release ring on low-temperature D.O.T. push-to-connect tube fittings. Often used in air brake lines for commercial trucks and trailers, they meet Department of Transportation FMVSS 571 safety standards.