Filter by
Choosing an Electrical Switch
More
DIP Switches
Configure instructions for electronic devices by sliding actuators to open or close each circuit. The actuators also make it easy to see your settings without turning on equipment. Since the contacts are gold plated, they have better conductivity and resist heat better than nickel-plated contacts. Push the contacts through holes in your circuit board, then solder them in place.
For technical drawings and 3-D models, click on a part number.
No. of Circuits Controlled | Switch Starting Position | No. of Terminals per Slide | Industry Designation | Switching Current @ Voltage | Max. Voltage | Actuator Material | Housing Material | Contact Material | Ht. | Wd. | Dp. | For Hole Ctr.-to-Ctr. | Pkg. Qty. | Pkg. | |
1 | 1 Off (Normally Open) | 2 | SPST-NO | 25 mA @ 25 V DC | 50V DC | White Plastic | Red Plastic | Gold-Plated Bronze | 0.3" | 0.18" | 0.38" | 0.1" | 20 | 00000000 | 000000 |
2 | 1 Off (Normally Open) | 2 | SPST-NO | 25 mA @ 25 V DC | 50V DC | White Plastic | Red Plastic | Gold-Plated Bronze | 0.3" | 0.28" | 0.38" | 0.1" | 20 | 00000000 | 00000 |
3 | 1 Off (Normally Open) | 2 | SPST-NO | 25 mA @ 25 V DC | 50V DC | White Plastic | Red Plastic | Gold-Plated Bronze | 0.3" | 0.38" | 0.38" | 0.1" | 20 | 00000000 | 00000 |
4 | 1 Off (Normally Open) | 2 | SPST-NO | 25 mA @ 25 V DC | 50V DC | White Plastic | Red Plastic | Gold-Plated Bronze | 0.3" | 0.48" | 0.38" | 0.1" | 20 | 00000000 | 00000 |
5 | 1 Off (Normally Open) | 2 | SPST-NO | 25 mA @ 25 V DC | 50V DC | White Plastic | Red Plastic | Gold-Plated Bronze | 0.3" | 0.58" | 0.38" | 0.1" | 20 | 00000000 | 00000 |
6 | 1 Off (Normally Open) | 2 | SPST-NO | 25 mA @ 25 V DC | 50V DC | White Plastic | Red Plastic | Gold-Plated Bronze | 0.3" | 0.68" | 0.38" | 0.1" | 20 | 00000000 | 00000 |
8 | 1 Off (Normally Open) | 2 | SPST-NO | 25 mA @ 25 V DC | 50V DC | White Plastic | Red Plastic | Gold-Plated Bronze | 0.3" | 0.88" | 0.38" | 0.1" | 20 | 00000000 | 00000 |