A rubber seal protects these switches from splashing water.

Maximize the space in a panel—these switches are half the size of most toggle switches.

Able to withstand high currents, these switches are often used with motors and pumps.

A quick push is all it takes to actuate these switches.

Sized for 4 mm or 6 mm panel cutouts, these switches are often used with circuit boards to control electronics.

Save space on a panel by using one switch to perform multiple switching functions.

The wide surface of these switches makes them easy to press on and off, even if your hands are full and you need to use an elbow.

Rated IP67 for protection from dust and temporary submersion.

Able to withstand high currents, these switches are often used with motors and pumps.

Grip and twist a lever to turn these switches on or off—they’re designed to prevent accidental actuation. Install them into standard-sized panel cutouts.

Avoid accidental actuation—these switches won’t turn on or off until you grip and twist the lever. Install in a 16 mm dia. cutout.

Choose an actuator and contact block to make your own 22 mm plastic switch.

Choose an actuator and contact block to make your own 16 mm switch.

Operate these switches hands-free when working in damp or humid environments.

Like turning on a flashlight, slide these switches from one side to the other.

These 16 mm switches require a key to turn circuits on or off, limiting access to sensitive equipment.

Immediately cut power by pulling the cable.

Replace the hinges on access doors or machine guards with these switches to keep your team safe from active machinery.

Delay access to hazardous areas until conditions are safe; use these switches with machines that take time to stop after they are turned off. They mount to a door frame.

Cut power and keep it isolated to prevent equipment from starting up during inspection and maintenance. These switches are housed in a protective enclosure that resists denting, chipping, and cracking.

With a housing that’s designed to contain an explosion, these switches are safe to use in areas where ignitable concentrations of flammable or combustible gas, dust, or fibers may be present.

Keep power running while you access your enclosure. Unlike standard enclosure disconnect switches, which shut off power as you open your enclosure, these have an override function.

Quickly and safely mount these relays on 35 mm DIN rail (also known as DIN 3). IP20 rated, they have recessed terminals that prevent fingers and other objects from touching live circuits.

Use these relays with industrial automation systems, security and emergency lighting, and small motors.

Smaller than relays with electrical wiring, these relays fit in compact devices. Mount them through holes on circuit boards with their solder pin terminals.

Suitable for DC-powered equipment such as forklifts, floor scrubbers, and trucks.

These relays switch through a series of different circuit configurations every time they receive an input voltage. Also known as step relays.

Control multiple timing functions from your electrical cabinet—these timer relays mount to 35 mm DIN rail (also known as DIN 3 rail), which is the most commonly used size.

For fast installation, mount these relays directly to 35 mm DIN rail (also known as DIN 3 rail). With no moving parts, these solid state relays last longer and require less maintenance, are quieter, and switch faster than mechanical relays.

Troubleshoot and monitor the difference in air pressure between two points—these switches have a dial indicator to show differential pressure in real time.