A rubber seal protects these switches from splashing water.

Maximize the space in a panel—these switches are half the size of most toggle switches.

Simple to use, these switches actuate with a quick push.

The built-in contact block in these switches extends behind the panel half the depth of most other 22 mm switches, saving valuable space.

Actuate these switches with the push of a button. Their buttons are distinct colors to help you quickly spot switches without labels.

Actuate these switches with a quick push. A housing seals in anything that could ignite flammable material, so you can use them where ignitable gas and dust may be present.

Immediately cut power with a single push.

Immediately cut power with a single push.

Install in 14 mm dia. cutouts.

These familiar push-button switches mount to flat surfaces.

Mount these switches in an outlet box. Also known as palm-button switches, they have a large button that makes them easy to use even while wearing gloves.

These switches are protected from corrosion, high-temperature and high-pressure washdowns, and oil/coolant spraying. Install them in 22 mm dia. cutouts.

Prevent accidental actuation from bumps or vibration—these switches require you to grip and twist the lever to turn the switch. The contact block and actuator are all one piece, so they won’t separate in high-vibration applications.

Prevent accidental actuation from bumps or jostles—these switches require you grip and twist a lever to turn them on or off. Install them in 30 mm dia. cutouts.

The enclosure not only protects these switches, but also adds options for how you install them.

Choose from a variety of messages and colored lenses to combine a rocker with a base and wiring socket for a complete switch.

Also known as high-inrush current switches, these switches can handle starting currents up to 10 times greater than their rating, such as when a motor starts.

Rated IP67, these switches are protected from temporary submersion.

Choose an actuator and contact block to make your own 30 mm switch.

Choose an actuator and contact block to make your own 22 mm metal switch.

With a round key that is difficult to duplicate, these switches provide a higher degree of security than standard key switches.

To prevent accidental actuation and limit access to sensitive equipment, these switches require a key to turn circuits on or off. The contact block and actuator are all one piece, so they won’t separate in high-vibration applications.

Designed for use near ignitable gases, fibers, and dust, these switches have a housing that seals in anything that could ignite flammable material. They require a key to turn circuits on or off, preventing accidental activation and limiting access.

The lever sticks out further than a push button, making it easy to identify the position of these switches.

Activate or deactivate fans, lights, and other devices inside your enclosure when you open or close the door.

Open and close circuits in a snap. These switches actuate quickly to minimize arcing and prevent contacts from sticking.

Smaller than standard size snap-acting switches, these fit in tight spaces.

Prevent automatic doors from closing on a person or an object—these switches immediately turn machinery off when actuated with minimal force.

No need for separate outlet boxes—these combine a switch and a receptacle into a single box.

Combine a switch and receptacle into a single outlet box for a small footprint.

Prevent accidental activation—these switches require a key to turn lights on and off.

Install these switches in a panel cutout to automatically turn electrical equipment on or off after a set interval.

For use with equipment that cycles on and off, these relays meet UL 508 for air conditioning and heating. Also known as definite-purpose contactors.

Set to actuate at a specific temperature, these switches are easy to setup and prevent changes to the setpoint. They have a threaded probe, so they install directly into tanks, pipelines, and other process components to turn equipment on and off at a set temperature.