Mount the hinge leaves to the surface of the door and the frame. These hinges are easy to install because they don't require cutouts (mortises).

Turn a set screw to adjust the door up or down after it's hung.

Plastic hinges are a lightweight alternative to metal hinges and provide smooth, silent operation.

Turn a set screw to adjust the door 1/8" up or down after it's hung.

Plastic hinges are a lightweight alternative to metal hinges and provide smooth, silent operation.

Turn a set screw to adjust the door 1/8" up or down after it's hung.

Springs in these hinges with holes automatically swing doors and gates closed behind you.

After a light push on the door, springs in these hinges swing doors and gates fully open.

Plastic hinges are a lightweight alternative to metal hinges and provide smooth, silent operation.

These hinges are made of metal.

These hinges allow 360° of motion.

In addition to rotating 360°, these hinges tilt up and down.

Also known as bullet hinges, these hinges are the right size for tight spaces and narrow frames.

Plastic hinges are a lightweight alternative to metal hinges and provide smooth, silent operation.

Plastic hinges are a lightweight alternative to metal hinges and provide smooth, silent operation.

The hinge pin is attached to the frame leaf so you can quickly lift the door off the hinge without removing the pin.

These hinges without holes are spring loaded—pull the handle to retract the pin and disconnect a door; release the handle and the pin snaps back.

To make reconnecting doors easier than other pull release quick disconnect hinges, these have a keeper that holds the pin in a retracted position.

To retract the pin and disconnect a door, squeeze the hinge handles together. Release the handles and the pin snaps back.

Lock these hinges open at any angle within their range of motion.

One leaf mounts around the edge of the door for a secure hold, while the other mounts to the frame.

The mounting hole pattern does not follow an industry standard, which means you can work around worn mounting holes when replacing template hinges.

A stud projects from the back of each hinge leaf to prevent the door from being forced open. The mounting holes form an industry-standard half-moon shape.

The mounting holes on these hinges form an industry-standard half-moon shape.

Longer than other entry door hinges, these piano-style hinges run the entire length of doors for strength and durability.

Only one cutout (mortise) is needed to mount these hinges—the offset design allows surface mounting the door leaf and mortise mounting the frame leaf.

To reinforce loose or damaged hinges, mount one of these hinges to the top edge of the pull-side of the door.

The mounting holes form an industry-standard half-moon shape.

Designed to wrap around the edge of the partition frame, these hinges provide a stronger hold than other toilet partition door hinges.

Plastic bushings on these metal hinges prevent metal-to-metal contact that can release particles as hinges open and close.

These hinges are made of metal.

Plastic hinges are a lightweight alternative to metal hinges and provide smooth, silent operation.

Mounting slots allow door alignment adjustments during and after hinge installation.

No need for drilling holes or welding, slip these hinges onto panel and door edges for a secure fit.

With a 170° range of motion, these hinges are for doors that need to open wide.

Spring tension pulls the door closed when it’s open less than 10° and keeps it closed without a catch or latch.

Easier to install than other concealed cabinet hinges, these do not require a cutout.

To ensure a good fit, these hinges have screws for horizontal, vertical, and depth adjustments after installation.

Instead of mounting to the side of a door, mount these hinges to the top and bottom to allow doors to open wide.

Slip the hinge pins into 11/32" Dia. × 5/16" Dp. holes in a cabinet.

Plastic hinges are a lightweight alternative to metal hinges and provide smooth, silent operation.

A spring in these hinges automatically swings doors and gates closed behind you.

These hinges have wide hinge leaves that provide a large mounting surface to keep freezer and refrigerator doors from sagging.

Wide hinge leaves provide a large mounting surface to keep trailer doors from sagging.

Pivots provide smooth motion at the junction between two T-slotted rails.

Position two strut channels at a 30° to 90° angle, then tighten the bolt to secure.

No need for fasteners—friction holds this framing together. Use press-fit framing and fittings to assemble carts, enclosures, and partitions.