Thicker, more flexible, and less aggressive than standard nylon mesh discs, use these for sanding on curved or delicate surfaces.

When you need to achieve a more consistent finish, choose nylon mesh sanding discs over paper- or cloth-backed discs.

When you need to achieve a more consistent finish, choose nylon mesh sanding discs over paper- or cloth-backed discs.

Remove rust and corrosion from surfaces that have protruding studs, such as brake hubs and flanges, without damaging the stud's threads.

The nylon mesh on these discs is embedded with precision-shaped ceramic alumina, which cuts through hard metals like stainless steel faster than other forms of ceramic alumina because of its sharp, outwardly pointed grit.

Thicker, more flexible, and less aggressive than standard nylon mesh discs, use these for sanding on curved or delicate surfaces.

For use with vacuum sanders, these discs have holes that allow dust to get sucked up before it can build up and dull the abrasive surface.

Holes in the disc let you see the surface you’re sanding.

Nylon mesh is embedded with precision-shaped ceramic alumina, which cuts through hard metals like stainless steel faster than other forms of ceramic alumina because of its sharp, outwardly pointed grit.

Prepare material surfaces for finishing processes such as coating, painting, and soldering—these discs contain an extra coarse ceramic alumina abrasive for heavy cleaning and stripping of stainless steel, nickel, and other hard metals.

The flexible edge of the sanding disc overhangs these backup pads.

Secure the shank into the collet or chuck of a tool.

Thread one of these pads onto the tool's arbor.

With a free-spinning hub, these pads rotate independently while their raised ribs graze the back of the disc to clear debris and prolong the disc's life.

Thread one of these backup pads onto the tool’s arbor, then attach a sanding disc and secure with the disc nut.

These pads are designed to channel air flow to the sanding disc for cooler operation, prolonging the life of the disc.

Thread the stud into the tool's spindle and then press the sanding disc onto the backup pad.