Made of chemical-resistant Tychem 2000 (formerly known as Tyvek QC), these hood respirators have both an outer bib and an inner bib that tucks into your clothing for splash protection. They hook up to your plant's air lines—because you don’t need to draw air through a filter or cartridge, resistance and fatigue are minimized. Respirators have a ratchet suspension that adjusts with an easy-turn knob.

These respirators do not require fit testing. The hood has a loose, comfortable fit that leaves room for a ponytail or beard. When the hood becomes worn, swap it with a replacement hood (sold separately). If you need a different material or style, select a respirator hood that’s compatible with your respirator.

Add extension hose (sold separately) to increase your span up to 300 ft. To maintain NIOSH approval, respirators must be used with the hoses listed.

Use a cooling tube or a heating/cooling tube (sold separately) to maintain a comfortable temperature inside these respirators. Turn a knob to control the amount of warm air flowing in from your air supply.

Keep clean, breathable air flowing from a respirator air supply hose to your hood or helmet by replacing worn or damaged breathing tubes. To maintain NIOSH approval, choose a breathing tube that is compatible with your respirator hood series.

Covers (sold separately) extend the life of tubes by protecting them from harsh contaminants, such as paint and chemicals.

The portable pump on these respirators provides a continuous supply of clean air for one person.

Add extension hose (sold separately) to increase your span up to 300 ft. To maintain NIOSH approval, respirators must be used with the hoses listed.

Good for use around abrasive blasters and paint sprayers, these respirators are made of high-density materials that protect against rough airborne particles. An air pump (sold separately) is required. The inner lens meets ANSI/ISEA standards for impact resistance. Respirators have a pinlock suspension that adjusts with interlocking straps.

Add extension hose (sold separately) to increase your span up to 300 ft. To maintain NIOSH approval, respirators must be used with the hoses listed.

When connected to an air pump, respirators provide a continuous supply of clean air. They have a chemical-resistant Tychem 2000 (formerly known as Tyvek QC) hood that protects against light liquid splashes. Tuck the hood with outer bib and inner bib into your clothing for splash protection. The ratchet suspension hat adjusts with an easy-turn knob.

If you need a different material or style, select a respirator hood that’s compatible with your respirator. Respirator hoods do not require fit testing, and they leave enough room to fit a ponytail or beard without compromising your respiratory protection. Hoods are available in a variety of materials and protection factors.

Add extension hose (sold separately) to increase your span up to 300 ft. To maintain NIOSH approval, respirators must be used with the hoses listed.

The most mobile respirators in our offering—these powered respirators allow a wider range of motion than supplied-air respirators. The blower straps around your waist to allow unrestricted movement. They’re often used for jobs such as painting and applications where you need to move around. Comfortable to wear for extended periods of time, these respirators don’t press directly against your face. They include a rechargeable lithium-ion battery that powers them for approximately four hours. To alert you to low battery and low airflow, they have an alarm with two distinct sounds that can be heard inside the hood.

Made of Tychem 2000 (formerly known as Tyvek QC), these hoods are chemical resistant. They have two layers: an outer bib for overspray protection and an inner bib that tucks into your clothing for splash protection. Turn the knob to adjust the hood’s ratchet suspension for a personalized fit.

Respirators with a hard hat are best for jobsites where there is a risk of falling objects or an on-site hard hat requirement. The hard hat fits inside the hood.

Harnesses (sold separately) make it comfortable to wear the respirator for long periods by distributing its weight and reducing pressure on your lower back.

Replace worn or damaged breathing tubes—these tubes deliver clean, breathable air from the air pump to your hood or helmet. To maintain NIOSH approval, match breathing tubes to the same manufacturer and series as the respirator and corresponding hood or helmet.

Covers (sold separately) extend the life of tubes by protecting them from harsh contaminants, such as paint and chemicals.

Replace the blower when it’s worn or damaged to keep air flowing through your powered respirator. Blowers suck in air and push it through a filter or cartridge to deliver clean air. They’re battery powered for portability, with a gauge telling you how much battery life is left. To keep you safe, a low-battery alarm will go off when it’s time to recharge the battery. A low-flow alarm sounds when you need to change your filter or cartridge.

NEC rated blowers prevent sparks that could ignite flammable or combustible particles in the air. Use them when working in environments where flammable and explosive vapors, gases, and fabrics may be present.

Choose a filter or cartridge (sold separately) to remove harmful particles from the air. Cartridges also remove gases and vapors.