Use this grease in areas where there is the possibility of contact with food. Also known as dielectric grease, it lubricates and protects electrical systems. It resists water and corrosion. This grease can be used on most rubber and plastic.

NLGI viscosity grade is a rating of a grease's consistency. NLGI 1 is about the consistency of tomato paste. NLGI 2 is about the consistency of peanut butter.

Dielectric strength measures the maximum voltage a grease can withstand without losing its insulating properties. The higher the dielectric strength, the better its quality as an insulator.

Grease that is NSF Registered H1 and grease that meets FDA Compliant 21 CFR 178.3570 are rated for incidental contact with food. Grease that meets ASTM E595, a standard used by NASA, will produce almost no volatile emissions, even in a high vacuum. They’re a good choice for use around sensitive electronics.

Grease lubricates most efficiently below the maximum temperature. Nonmelting grease can be used at temperatures above the maximum temperature briefly, but then will break down more quickly.

Lubricate ball and roller bearings for high-load applications. Often used on food-processing equipment, generators, and furnace door hinges, this grease is NSF registered H1 and meets FDA Compliant 21 CFR 178.3570 for incidental food contact. It has small particles of PTFE that reduce friction and help the grease maintain its lubricity across a wide range of temperatures.

NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter.

Weld load measures a grease's ability to withstand pressure in kilograms of force (kgf). The higher the rating, the more pressure the grease can withstand.

Grease lubricates most efficiently within the listed temperature range. Nonmelting grease can be used at temperatures above the maximum temperature briefly, but then will break down more quickly.

For use in food-processing and preparation areas, these thin, multipurpose lubricants are NSF registered H1 for incidental food contact. Use them to cut through dirt, grease, and rust, loosen stuck fasteners, and protect tools and equipment.

Lubricants with silicone are clear, have excellent water resistance, and can be used on rubber. Not for use on painted surfaces. Lubricants with PTFE provide long-lasting lubrication.

Lubricants cannot be sold to the listed areas due to product regulations.

Use this oil in food-processing and preparation areas.

Viscosity is the thickness of an oil. The higher the grade, the thicker the oil, and the less it flows.

Oil that is NSF Registered H1 and oil that is FDA Compliant 21 CFR 178.3570 are rated for incidental contact with food.

Synthetic oil lasts longer than mineral oil and withstands a wider range of temperatures.