This welded, one-piece strut channel combines two strut channels side-to-side.

For compatibility with quick-connect clamps to secure pipe and conduit without screws and tools, this strut channel has narrow slotted holes.

Designed to wrap around the sides of strut channel, these brackets provide a stronger hold than other strut channel brackets.

Push these brackets into strut channel and tighten the included cam screws for a partially concealed connection.

These brackets have narrow slots compatible with quick-connect clamps for securing pipe and conduit on the channel side of struts without screws or tools.

A spring plus serrated grooves that grip the lip of the channel provide a more secure hold than standard strut channel nuts.

Connect two channels to create a stacked channel.

There's no need for additional fasteners with these nuts—they combine a strut channel nut with a spring and a threaded stud.

Run wires through the hollow stud of these nuts or use them as vents.

Push these nuts into place rather than threading them onto a fastener.

Quickly fasten threaded rod to strut channel. Snap these hinged nuts onto a threaded rod, then slip the head through a strut channel hole.

Use with hex nuts to connect threaded rod.

Notches on these washers grip the channel to keep them in place.

Securely fasten strut channel to the floor.

Mount a length of strut channel between the ends of a beam to run cable and conduit along the beam without drilling.

Roll components along strut channel hanging overhead.

Smoothly move lightweight curtains overhead along strut channel.

Support the corners of strut channel structures.

A tab on the end of these shelf brackets fits inside the strut channel for extra stability.

Create a four-sided raceway for cable, or give a more finished look to strut channel structures.

Mount between two strut channels to create a handhold.

Slip these hangers onto the lip of top-opening strut channel to attach chain, wire rope, pipe, and threaded rod.

Block strut channel ends to keep trolleys, slides, and other hanging components from rolling out.

Mount electrical components along your strut channel to bring power to new locations.