We will reply to your message within an hour.
Rails are drilled with consistently spaced holes for multiple mounting options that do not require machining. Use this steel bolt-together framing to build guards, tables, and racks.
Half the weight of steel, this aluminum framing resists corrosion in wet environments.
These rails have continuous T-slots for attaching fittings. Use this versatile framing to configure machine guards, enclosures, carts, and workstations.
Mount these bull's eye levels to workstation and table frames made of T-slotted framing for easy leveling in all directions on the horizontal plane.
Connect T‐slotted rails and reinforce joints for structural stability.
Use hinges to add doors, lids, and machine guards to T-slotted framing.
Slide drawers, panels, and doors with these tracks and rollers.
Make your T-slotted framing workstation more ergonomic. These positioning arms let you move tools and other items within reach, reducing fatigue and streamlining repetitive processes.
Mount components to these load-rated bearings and track rollers to add linear motion along T-slotted rails.
Add rollers to T-slotted framing to create flow rails, ball transfer tables, and other manual conveyors.
Screw and nut sets or nuts secure brackets and other accessories to rails.
Attach sensors, tubes, and other components to T-slotted framing rails and structures.
Pivots provide smooth motion at the junction between two T-slotted rails.
Add electrical outlets to workstations with these outlet strips that mount on T-slotted rails.
Add panels to T-slotted framing to create machine guards and strip doors.
For repetitive workholding, mount these clamps to T-slotted framing to hold and release parts.
Add a convenient grip to steer carts or open and close doors, windows, and drawers made of T-slotted framing.
Add mounting feet and casters to T-slotted framing structures to level equipment, anchor legs to the floor, or add mobility.
Distribute compressed air, hydraulic fluid, or water from a single supply to multiple locations.
Control static and ground T-slotted framing structures with these bonding and grounding components.
Attach and position phones, tablets, monitors, and computer accessories on T-slotted rails.
Stay organized with hooks, bin boxes, shelves, and tool holders that work with T-slotted framing.
Seal T-slots, rail ends, and gaps between rails to keep out dust, debris, and other contaminants.
Bumpers and surface guards cushion doors and other moving parts to prevent damage and reduce noise.
Get projects off to a quick start with these kits that include the components you need to build simple structures, such as workbenches, workstations, and stands.
Align and drill accurate holes in T-slotted rails with these reusable templates.
Secure doors and windows made of T-slotted framing to protect valuables or restrict access for safety.
Route wires, cables, and tubing along T‐slotted rails.
Illuminate workstations, enclosures, and machines.
Clamp panels onto strut channel to hold them in place.
Push these brackets into strut channel and tighten the included cam screws for a partially concealed connection.
These brackets have narrow slots compatible with quick-connect clamps for securing pipe and conduit on the channel side of struts without screws or tools.
Designed to wrap around the sides of strut channel, these brackets provide a stronger hold than other strut channel brackets.
Attach strut channel at any point on a threaded rod without taking apart your assembly.
Half the height and the same width as regular strut channel, this low-profile strut channel fits into tight spots and is compatible with many of the same brackets.
Slide the strut channel into the tube for telescoping length adjustments.
Create continuous runs of channel without corners.
Up to two times the height of regular strut channel, this high-profile channel is stronger than regular strut channel.
Run cable and tubing in the tightest spaces with channel that is one-quarter the height and one-half the width of regular strut channel.
For compatibility with quick-connect clamps to secure pipe and conduit without screws and tools, this strut channel has narrow slotted holes.
This welded, one-piece strut channel combines two strut channels side-to-side.
This welded, one-piece strut channel combines two strut channels back-to-back.
Provide a stable, nonmarring base for strut channel legs.
Securely fasten strut channel to the floor.
Mount strut channel away from walls.
Support the corners of strut channel structures.
A spring plus serrated grooves that grip the lip of the channel provide a more secure hold than standard strut channel nuts.
Quickly fasten threaded rod to strut channel. Snap these hinged nuts onto a threaded rod, then slip the head through a strut channel hole.
Run wires through the hollow stud of these nuts or use them as vents.
Connect two channels to create a stacked channel.
Serrated grooves grip the lip of the channel.
Keep a rod securely centered against the strut channel.
Also known as insert nuts, these convert slotted holes to threaded round holes and keep them centered in the channel.
Quickly attach these nuts by twisting them closed at any point along a threaded rod.
Insert these nuts into the long open side of strut channel and twist to secure. A built-in washer enables one-handed installation.
A tab fits tightly against the lip of the channel to keep these nuts from slipping.
In addition to serrated grooves for gripping the lip of the channel, these nuts have wings for easy positioning.
There's no need for additional fasteners with these nuts—they combine a strut channel nut with a spring and a threaded stud.
Push these nuts into place rather than threading them onto a fastener.
Keep hardware centered in the strut channel slot.
Add hardware to strut channel without having to hold the washer in place or reach inside the channel.
Use with hex nuts to connect threaded rod.
Notches on these washers grip the channel to keep them in place.
Support and protect conduit by mounting it to strut channel.
Create a four-sided raceway for cable, or give a more finished look to strut channel structures.
Mount to your strut channel to support rail, tube, or pipe.
Cover rough ends of strut channel.
A tab on the end of these shelf brackets fits inside the strut channel for extra stability.
Block strut channel ends to keep trolleys, slides, and other hanging components from rolling out.
Mount electrical components along your strut channel to bring power to new locations.
A flat or half-round shape keeps water from pooling on these strut rails. Unlike a traditional C-shape strut, these rails prevent the buildup of bacteria and debris, making them ideal for use in sanitary or food production environments.
Mount between two strut channels to create a handhold.
Position two strut channels at a 30° to 90° angle, then tighten the bolt to secure.
Attach cable, pipe, tubing, and other items to your strut channel.
Hold two pieces of strut channel together so they can smoothly open or close.
Mount these brackets to strut channel to add stair treads. They’re also known as stringers.
Smoothly move lightweight curtains overhead along strut channel.
Slip these hangers onto the lip of top-opening strut channel to attach chain, wire rope, pipe, and threaded rod.
For quick mounting of components, these hangers snap into strut channels for a strong hold and easy repositioning.
Brackets mount on the outside of strut channel to allow trolley movement.
Roll components along strut channel hanging overhead.
No need for fasteners—friction holds this framing together. Use press-fit framing and fittings to assemble carts, enclosures, and partitions.
Create posts of varying lengths.
Create strong structures by welding this framing together. Add metal panels to close off openings.
Build lightweight structures, such as light duty machine guards, enclosures, and carts, with framing that is two-thirds the weight of aluminum framing.
Build test fixtures, prototypes, and other small structures with this miniature version of T-slotted framing and fittings.
An alternative to wood in structural applications, FRP fiberglass is strong and lightweight.
More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.
4130 alloy steel has a low carbon content that provides good weldability. It's often used for structural applications.
The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. Sometimes called cartridge brass, it's commonly used for ammunition casings, radiator components, and decorative door hardware.
Adjust supports to the exact height you need to route pipe, conduit, and tubing through strut-mount routing clamps and hangers.
Reduce noise caused by HVAC systems. These sturdy rubber supports isolate vibration caused by heat pumps and air conditioning units, resulting in a quieter facility. When used on roofs, they also keep components above puddled water, which can cause damage.
Elevate robot arms with these bases so they can reach onto raised surfaces, such as conveyor belts or workstations.
Weld these caps and targets to the ends of posts to create stackable shelving and racking systems.
Pull the edge of the lock to open your door—the low-profile grip fits in tight spaces. These locks are a convenient alternative to cam and draw locks since they don’t require you to turn a cam or pull a latch.
For use on on sliding doors—including those on T-slotted framing systems—these locks have a two-piece design that locks when pushed closed. An edge-pull handle makes these locks easy to open and fits where traditional handles don’t.
An edge-pull handle fits where traditional handles don’t and makes these latches easy to open.
Quickly push to secure sliding doors. An edge-pull handle fits where traditional handles don’t and makes these latches easy to open.
An offset barrel allows you to position threads near edges and corners.
Weld these nuts to stainless steel surfaces.
Projections on the base concentrate the weld and provide room for heat to dissipate.
With a slim base and a short barrel, these weld nuts fit in tight spaces, such as channels, and in low-clearance areas.
Install threads in channels and other tight spaces where round-base weld nuts won’t fit.
Install metric threads in channels and other tight spaces where round-base weld nuts won’t fit.
Integrate these stroboscopes into fast-moving lines to check quality.