Check the accuracy of torque wrenches and screwdrivers—place your tool onto the tester with the included square drive connector and turn. The main pointer shows torque as it's measured; the memory pointer shows the maximum torque reached. Use these testers with hand tools only.

Note: For the most accurate performance, the maximum torque you apply should fall near the middle of the tester’s torque range.

For technical drawings and 3-D models, click on a part number.

Finger-tighten the three-jaw chuck onto a torque wrench or screwdriver, then twist either the gauge or tool to check the tool’s accuracy. A pointer on the dial shows torque as it’s measured—no batteries required. Bring these pocket-sized testers anywhere your tools are.

All testers come with a calibration certificate with test data traceable to either NIST or JIS, so they meet standards for accuracy. For the most accurate performance, the maximum torque you're applying should fall near the middle of the tester's torque range. Use with hand tools only.

Testers with memory pointer show the maximum torque reached.

For technical drawings and 3-D models, click on a part number.

Measure the twisting force needed to tighten or loosen caps and knobs with these torque testers. Four adjustable gripping posts clamp round and irregularly-shaped containers. Twist the top by hand to measure force or use it to calibrate your capping machine, so it applies the right amount of force in a production line. For the most accurate performance, the maximum torque you’re applying should fall near the middle of the tester’s torque range. If you accidentally exceed the torque range, these testers have overload protection to prevent damage to the measuring system.

View torque measurements, change operating modes, and switch units of measurement on the LCD screen. Store data on the microSD card, transfer it to your devices via Bluetooth or USB, or print using the DB9 cable. The I/O cable connects to controllers to operate other devices dependent on torque force readings.

Testers with a calibration certificate with test data traceable to NIST meet standards for accuracy.

Calibrate torque-limiting power tools such as air-powered and impact drivers. These testers check clockwise and counterclockwise torque, so fasteners do not fail because they were too loose or over-tightened and deformed. They record the first time your maximum torque is reached (peak down), the maximum torque (peak), and torque as it's measured (real-time). Use the flexible or rigid joints to connect your tools to these testers to simulate your fastening application.

These testers have a calibration certificate with test data traceable to NIST, so they meet standards for accuracy. For the most accurate performance, the maximum torque you're applying should fall near the middle of the tester's torque range.

Torque Testers cannot be sold to the listed areas due to energy efficiency regulations.

Testers that meet ISO 17025 have been checked in a laboratory that was evaluated for accuracy.

Connect to computers, laptops, or tablets that run on Microsoft Windows with a USB cable and analyze results with data acquisition software (both sold separately).

For technical drawings and 3-D models, click on a part number.

Accurate to within ±1%, these torque testers are often used to check the accuracy of torque wrenches and screwdrivers on assembly lines. They come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy. To test, place your torque wrench or screwdriver onto the tester with the included square drive connection and turn. These testers display torque as it's measured and the maximum torque reached. For accuracy when testing click-style wrenches, they also show the first torque peak reached. They’re not for use with impact or pulse tools.

Note: For the most accurate readings, the maximum torque you're applying should fall near the middle of the tester's torque range.

Bench-top testers can be mounted to your work surface.

Portable testers are lightweight and easy to move around your facility. Their touch-screen display makes it easier to navigate through different menus than testers with a digital-screen display. To view data in a CSV file, pop out the tester’s SD card and plug it into your computer. You can also transfer data by connecting the tester directly to your computer with the USB cord. To use these testers with nonimpact power tools, they include at least one socket screw adapter. These testers meet ISO 17025, so they’ve been checked in a laboratory that was evaluated for accuracy.

Measure the force of hand and non-impact electric torque screwdrivers to keep fasteners from failing due to under or overtightening. A chuck-like adapter simulates your fastener joint during testing. These testers record the first time you reach the maximum torque (peak down), the maximum torque (peak), and torque as it's measured (real-time). For the most accurate performance, the maximum torque you're applying should fall near the middle of the tester's torque range. A track mode lets you monitor fluctuating torque. For quick pass/fail testing, these testers have programmable high/low set points with lights and an alarm. They include a calibration certificate with test data traceable to NIST that states they have passed tests for accuracy.

Testers that meet ISO 17025 have been checked in a laboratory that was evaluated for accuracy.

Testers with automatic screw release reduce time between tests by returning the test screw to its starting position once torque is removed.

Use data acquisition software and a USB cable (each sold separately) to analyze results and connect to computers, laptops, or tablets that run on Microsoft Windows.

Testers cannot be sold to the listed areas due to energy efficiency regulations.

Use these gauges with changeable sensors and square-drive sockets (sold separately) to display, collect, and download torque readings. They display torque as it's measured and the maximum torque reached. Gauges can also be used to convert any hand-turned square drive tool into a precise torque-measuring tool. For the most accurate performance, the maximum torque you're applying should fall near the middle of the gauge's torque range.

Wrench-attachable sensors fit between your wrench and socket. Use with hand tools only.

Hand-turned sensors don't require a tool; place into your socket and turn them with your hand.

Glue these gauges onto a structure to measure strain in a single direction. They’re often used in structural testing and monitoring applications. Strain is the deformation or displacement of material caused by force.

Solder wire leads onto gauges with solder terminals after the gauge has bonded to your surface. After soldering, apply a protective coating.

Gauges with wire leads save you the effort of soldering wire to the gauge and checking to see that it’s bonded securely.

For technical drawings and 3-D models, click on a part number.