Filter by
High-Strength Toggle Anchors for Drywall
![]() | ![]() |
Our highest-strength drywall anchors are strong enough to secure pegboards, grab bars, and sinks. The toggle creates an extremely tight hold and won’t fall behind the wall when your screw is removed, so you can switch out components without losing strength. However, the anchor itself cannot be removed. Unlike traditional toggle bolt anchors, the toggle is pulled tight to the wall with the cap, which also covers the hole.
To install, push the toggle through a drilled hole and pull the anchor back toward you until the toggle rests flush against the wall. Then, slide the cap along the straps up to the wall. Push straps side-to-side, snapping them off so they're level with the cap. Next, position your component over the hole, insert a machine screw, and tighten. The minimum screw length is the wall and component thicknesses plus 1/2".
Ultimate Strength, lbf | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Thread Size | Usable Lg. | Drill Bit Size | Wing Span | Toggle Material | Material | Fastener Head Type | Drive Style | Pull-Out | Shear | Conditions Tested In | Pkg. Qty. | Pkg. | ||
10-24 | 3/8" to 3 5/8" | 1/2" | 2" | Zinc-Plated Steel | Polystyrene | — | — | 230 | 240 | 1/2" Drywall | 10 | 000000000 | 000000 | |
10-24 | 3/8" to 3 5/8" | 1/2" | 2" | Zinc-Plated Steel | Polystyrene | Rounded | Phillips/Slotted | 230 | 240 | 1/2" Drywall | 10 | 000000000 | 00000 | |
10-24 | 3/8" to 3 5/8" | 1/2" | 2" | Zinc-Plated Steel | Polystyrene | Flat | Phillips | 230 | 240 | 1/2" Drywall | 10 | 000000000 | 00000 | |
10-24 | 3/8" to 3 5/8" | 1/2" | 2" | 18-8 Stainless Steel | Polystyrene | — | — | 230 | 240 | 1/2" Drywall | 1 | 000000000 | 0000 | |
10-24 | 2" to 9 1/2" | 1/2" | 2" | Zinc-Plated Steel | Polystyrene | — | — | 230 | 240 | 1/2" Drywall | 5 | 000000000 | 00000 | |
10-24 | 2" to 9 1/2" | 1/2" | 2" | 18-8 Stainless Steel | Polystyrene | — | — | 230 | 240 | 1/2" Drywall | 1 | 000000000 | 0000 | |
1/4"-20 | 3/8" to 3 5/8" | 1/2" | 2" | Zinc-Plated Steel | Polystyrene | — | — | 260 | 240 | 1/2" Drywall | 10 | 000000000 | 00000 | |
1/4"-20 | 3/8" to 3 5/8" | 1/2" | 2" | Zinc-Plated Steel | Polystyrene | Rounded | Phillips/Slotted | 260 | 240 | 1/2" Drywall | 5 | 000000000 | 0000 | |
1/4"-20 | 3/8" to 3 5/8" | 1/2" | 2" | Zinc-Plated Steel | Polystyrene | Flat | Phillips | 260 | 240 | 1/2" Drywall | 10 | 000000000 | 00000 | |
1/4"-20 | 3/8" to 3 5/8" | 1/2" | 2" | 18-8 Stainless Steel | Polystyrene | — | — | 260 | 240 | 1/2" Drywall | 1 | 000000000 | 0000 | |
1/4"-20 | 2" to 9 1/2" | 1/2" | 2" | Zinc-Plated Steel | Polystyrene | — | — | 260 | 240 | 1/2" Drywall | 5 | 000000000 | 00000 | |
1/4"-20 | 2" to 9 1/2" | 1/2" | 2" | 18-8 Stainless Steel | Polystyrene | — | — | 260 | 240 | 1/2" Drywall | 1 | 000000000 | 0000 | |
5/16"-18 | 3/8" to 2 1/2" | 3/4" | 2" | Zinc-Plated Steel | Polystyrene | — | — | 270 | Not Rated | 1/2" Drywall | 10 | 000000000 | 00000 | |
3/8"-16 | 3/8" to 2 1/2" | 3/4" | 2" | Zinc-Plated Steel | Polystyrene | — | — | 270 | 290 | 1/2" Drywall | 5 | 000000000 | 00000 | |
3/8"-16 | 3/8" to 2 1/2" | 3/4" | 2" | 18-8 Stainless Steel | Polystyrene | — | — | 270 | 290 | 1/2" Drywall | 1 | 000000000 | 0000 | |
1/2"-13 | 3/8" to 2 1/2" | 3/4" | 2" | 18-8 Stainless Steel | Polystyrene | — | — | 270 | Not Rated | 1/2" Drywall | 1 | 000000000 | 0000 | |
M5 × 0.8 mm | 10 mm to 92 mm | 13 mm | 51 mm | Zinc-Plated Steel | Polystyrene | — | — | 230 | 240 | 1/2" Drywall | 5 | 000000000 | 0000 | |
M6 × 1 mm | 10 mm to 92 mm | 13 mm | 51 mm | Zinc-Plated Steel | Polystyrene | — | — | 260 | 240 | 1/2" Drywall | 5 | 000000000 | 0000 | |
M8 × 1.25 mm | 10 mm to 64 mm | 19 mm | 51 mm | Zinc-Plated Steel | Polystyrene | — | — | 260 | 290 | 1/2" Drywall | 5 | 000000000 | 00000 | |
M10 × 1.5 mm | 10 mm to 64 mm | 19 mm | 51 mm | Zinc-Plated Steel | Polystyrene | — | — | 270 | Not Rated | 1/2" Drywall | 5 | 000000000 | 00000 |