Housing is brass.

These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.

Measure tension force as well as weight.

Press the side of the gauge tip against an object to record the amount of tension required to move it.

Measure the tension of wire or cable.

Take tension and compression measurements at 0.1% accuracy—the highest accuracy of all our force gauges.

Safely view your tension force measurements on a handheld receiver up to 450 ft. away when moving bulk material with cranes and hoists.

A chuck-style grip with a round opening gets a secure hold on pins.

Good for gripping most shapes and materials.

View weight measurements from your tension and compression force sensor.

Thinner than a credit card, these force sensors fit into narrow spaces to measure the applied load between two surfaces.

Place your tool and the included square drive connector on the tester and turn.

Measure the twisting force needed to tighten or loosen caps and knobs with these torque testers.

Accurate to within ±1%, these torque testers are often used to check the accuracy of torque wrenches and screwdrivers on assembly lines.

Use these gauges with changeable sensors and square-drive sockets to display, collect, and download torque readings.

Measure your equipment’s pressure and send the data directly to a development board or single-board computer. Also known as transducers, these transmitters convert pressure into an electrical I²C signal and transmit it to your board.

At least four times as accurate as standard pressure transmitters, these transmitters are ideal for use in laboratories and analytical testing applications.

These transmitters automatically compensate for error introduced by vibration as well as temperature fluctuations, so you do not need to program your receiving device to correct for these factors. They convert pressure to an electrical signal that can be interpreted by receiving devices, such as remote displays, programmable logic controllers, and motor speed controls to monitor pressure or control equipment.

Choose these transmitters when you need reliable pressure monitoring but not high accuracy.

Adhere to safety standards and monitor pressure when working with high concentrations of oxygen.

The diaphragm on these transmitters mounts flush with your system’s connection, leaving no room for thick liquids to clog or harden. They’re often used to monitor pressure in wastewater, paint, and adhesive-dispensing applications.

For use in sanitary applications such as food processing, these transmitters are 3-A certified.

Ensure proper blade tension.

Measure belt tension up to 2,200 lbs.