1075 Spring Steel | McMaster-Carr

Filter by

System of Measurement

Thickness

Width

Length

Shape

Material

Temper Rating

Hardness

Heat Treatment

Hardness Rating

Shim Stock Form

Certificate Type

Fabrication

Appearance

Maximum Temperature

Yield Strength

Tolerance Rating

Elongation

Minimum Temperature

Specifications Met

REACH Compliance

DFARS Compliance

RoHS Compliance

Forward

How can we improve?

141 Products

About Carbon Steel, Alloy Steel, Spring Steel, and Cast Iron

Yield Strength: Not Rated
Hardness: Rockwell C45 (Hard)

1075 spring steel is easier to bend than 1095, but it has less bounce-back after heat treating. It is often used for springs and shims. This material is also known as scaleless steel.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

0.01" Thick. (-0.001" to 0.001" Tolerance)
Wd.	Lg., ft.	Heat Treatment		Each
1/2"	10	Hardened	0000000	000000
1"	10	Hardened	0000000	00000
1"	75	Hardened	00000000	00000
2"	5	Hardened	0000000	00000
4"	10	Hardened	00000000	00000
6"	5	Hardened	0000000	00000
6"	10	Hardened	00000000	00000
0.015" Thick. (-0.001" to 0.001" Tolerance)
1/2"	10	Hardened	0000000	00000
1"	5	Hardened	0000000	00000
1"	50	Hardened	00000000	00000
2"	5	Hardened	0000000	00000
2"	25	Hardened	00000000	00000
4"	10	Hardened	00000000	00000
6"	10	Hardened	00000000	00000
0.018" Thick. (-0.001" to 0.001" Tolerance)
1/2"	10	Hardened	0000000	00000
1"	5	Hardened	0000000	00000
2"	5	Hardened	0000000	00000
6"	10	Hardened	00000000	00000
0.02" Thick. (-0.001" to 0.001" Tolerance)
1/2"	10	Hardened	0000000	00000
1/2"	100	Hardened	00000000	00000
1"	5	Hardened	0000000	00000
1"	50	Hardened	00000000	00000
2"	5	Hardened	0000000	00000
2"	25	Hardened	00000000	00000
4"	10	Hardened	00000000	00000
6"	10	Hardened	00000000	00000
0.025" Thick. (-0.001" to 0.001" Tolerance)
1/2"	10	Hardened	0000000	00000
1/2"	75	Hardened	00000000	00000
1"	5	Hardened	0000000	00000
1"	50	Hardened	00000000	00000
2"	5	Hardened	0000000	00000
2"	25	Hardened	00000000	00000
6"	5	Hardened	00000000	00000
0.032" Thick. (-0.001" to 0.001" Tolerance)
1/2"	5	Hardened	0000000	00000
1/2"	50	Hardened	00000000	00000
1"	5	Hardened	0000000	00000
1"	25	Hardened	00000000	00000
2"	10	Hardened	00000000	00000
4"	10	Hardened	00000000	00000
6"	5	Hardened	00000000	00000
0.035" Thick. (-0.001" to 0.001" Tolerance)
1/2"	5	Hardened	0000000	00000
1/2"	50	Hardened	00000000	00000
1"	5	Hardened	0000000	00000
1"	25	Hardened	00000000	00000
2"	10	Hardened	00000000	00000
4"	10	Hardened	00000000	00000
6"	5	Hardened	00000000	00000

0.042" Thick. (-0.001" to 0.001" Tolerance)
Wd.	Lg., ft.	Heat Treatment		Each
1/2"	5	Hardened	0000000	000000
1"	25	Hardened	00000000	00000
2"	10	Hardened	00000000	00000
3"	10	Hardened	00000000	00000
4"	5	Hardened	00000000	00000
6"	4	Hardened	00000000	00000
0.05" Thick. (-0.001" to 0.001" Tolerance)
1/2"	5	Hardened	0000000	00000
1"	5	Hardened	0000000	00000
1"	25	Hardened	00000000	00000
2"	10	Hardened	00000000	00000
3"	5	Hardened	0000000	00000
4"	5	Hardened	00000000	00000
6"	4	Hardened	00000000	00000
0.062" Thick. (-0.002" to 0.002" Tolerance)
1/2"	5	Hardened	0000000	00000
1/2"	25	Hardened	00000000	00000
1"	10	Hardened	00000000	00000
2"	10	Hardened	00000000	00000
3"	5	Hardened	0000000	00000
4"	4	Hardened	00000000	00000
6"	3	Hardened	00000000	00000
0.094" Thick. (-0.002" to 0.002" Tolerance)
1/2"	5	Hardened	0000000	00000
1/2"	100	Hardened	00000000	000000
5/8"	5	Hardened	0000000	00000
3/4"	5	Hardened	00000000	00000
1"	4	Hardened	00000000	00000
1 1/4"	3	Hardened	00000000	00000
1 1/2"	3	Hardened	00000000	00000
1 1/2"	50	Hardened	00000000	000000
2"	2	Hardened	00000000	00000
2"	25	Hardened	00000000	000000
2 1/2"	2	Hardened	00000000	00000
2 1/2"	25	Hardened	00000000	000000
3"	1	Hardened	00000000	00000
3"	25	Hardened	00000000	000000
4"	1	Hardened	00000000	00000
4"	10	Hardened	00000000	000000
5"	1	Hardened	00000000	00000
5"	10	Hardened	00000000	000000
1/8" Thick. (-0.002" to 0.002" Tolerance)
1/2"	5	Hardened	00000000	00000
3/4"	4	Hardened	00000000	00000
7/8"	3	Hardened	00000000	00000
1"	3	Hardened	00000000	00000
1 1/4"	2	Hardened	00000000	00000
1 1/2"	2	Hardened	00000000	00000

Easy-to-Form 1075 Spring Steel Sheets

Yield Strength: 50,000 psi
Hardness: Rockwell B90 (Medium)
Heat Treatable: Yes
Max. Hardness After Heat Treatment: Rockwell C64
Specifications Met: ASTM A684

These sheets have a softened temper, which is also known as annealed, so they can be easily formed into shape and then heat treated for spring properties. 1075 spring steel is easier to bend than 1095, but it has less bounce-back after heat treating. It is often used for springs and shims.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

8" × 12"
Thick.	Thick. Tolerance	Heat Treatment	Flatness Tolerance		Each
0.015"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	000000
0.02"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
0.025"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
0.032"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
0.035"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
0.042"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
0.05"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
0.062"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
0.072"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
0.083"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
0.094"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
0.109"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
0.125"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
0.187"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
8" × 24"
0.015"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
0.02"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
0.025"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
0.032"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
0.035"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
0.042"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
0.05"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
0.062"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
0.072"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
0.083"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
0.094"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
0.109"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
0.125"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
0.187"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	000000
15" × 48"
0.025"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
0.032"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
0.035"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
0.042"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
0.05"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	000000
0.062"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	000000
0.072"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	000000
0.083"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	000000
0.094"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	000000
0.109"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	000000
0.125"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	000000
0.187"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	000000
24" × 48"
0.025"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	000000
0.032"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	000000

Shim Stock

Cut it into custom shapes to fit your application.

For accurate leveling, choose materials such as steel or stainless steel, which are hard enough to resist scratching and deforming. Softer shims, like copper or aluminum, can be used as wear plates between components that rub together, preventing damage to equipment. Metal shims include a material certificate with traceable lot number. Most shims include a test report.

Spring steel shim stock is comparable in strength to carbon steel shim stock, but is harder and holds its shape better. It isn't as corrosion resistant as other shims.

For technical drawings and 3-D models, click on a part number.

1075 Spring Steel Sheets

1 1/2" Wd. × 25" Lg.
Thick.	Thick. Tolerance	Min. Hardness	Temper Rating	Certification	Specifications Met		Each
0.125"	-0.002" to 0.002"	Rockwell C44	Full Hard	Material Certificate with Traceable Lot Number and Test Report	SAE AMS5122	00000000	0000000
4" Wd. × 25" Lg.
0.094"	-0.002" to 0.002"	Rockwell C44	Full Hard	Material Certificate with Traceable Lot Number and Test Report	SAE AMS5122	00000000	000000
24" Wd. × 48" Lg.
0.025"	-0.001" to 0.001"	Rockwell C44	Full Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM A682, ASTM A684	00000000	000000
0.032"	-0.0015" to 0.0015"	Rockwell C44	Full Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM A682, ASTM A684	00000000	000000
0.035"	-0.002" to 0.002"	Rockwell C44	Full Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM A682, ASTM A684	00000000	000000
0.042"	-0.002" to 0.002"	Rockwell C44	Full Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM A682, ASTM A684	00000000	000000
0.05"	-0.002" to 0.002"	Rockwell C44	Full Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM A682, ASTM A684	00000000	000000
0.062"	-0.002" to 0.002"	Rockwell C44	Full Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM A682, ASTM A684	00000000	000000

Email Us

About Carbon Steel, Alloy Steel, Spring Steel, and Cast Iron

1075 Spring Steel Strips

Easy-to-Form 1075 Spring Steel Sheets

Shim Stock