Without a shelf, these tables provide room to pull up a stool or chair. The durable steel top won't warp or splinter.

A lower shelf provides additional storage space. Often used in laboratories, these tables stand up to repeated washdowns and resist damage from grease and chemicals.

With an extra-smooth surface, these tables won't trap dirt and oil, making them easy to clean. They are also nonconductive.

With a thick steel frame and welded construction, these tables have a capacity of at least 10,000 lbs.

These durable tables won't warp or splinter. They can be configured at a custom height.

Support 3,000 to 5,000 lbs. with these welded tables. They can be configured for either seated or standing tasks.

With an extra-smooth nonconductive surface, these tables won't trap dirt and oil, making them easy to clean. They are often used as printer stands.

The wood top is nonconductive as well as impact and chemical resistant. It can be sanded and refinished. Use these tables to elevate machinery and equipment 24" from the floor.

With a thick steel frame and welded construction, these tables have a capacity of 10,000 lbs. Use them to elevate machinery and equipment 24" from the floor.

Adjust these tables from 18" to 24" to customize the height of machinery and equipment.

Fold these lightweight tables in half and use the handle to carry them with one hand.

Replace a table leg or make a table with your own tabletop.

Provide a convenient place outdoors to sit and eat.

Pull metal particles from grinding, cutting, and finishing workpieces out of the air to avoid breathing them and creating sparks in your work area.

Choose a workbench and then add any of the optional accessories. All workbenches come with a support brace and have legs with knockouts in the front and back to accept duplex electrical outlets.

To keep work from falling off the top, these workbenches have a backstop and side stops.

For added security, drawers are concealed behind padlockable doors.

At 48" wide and greater, these workbenches have a larger work surface and more storage than our standard cabinet workbenches.

Reinforced for strength and durability, these workbenches can hold twice the weight of our standard large-capacity cabinet workbenches.

With thick steel and an all-welded construction, these legs support the highest capacities of all our workbench legs.

These corrosion-resistant legs are often used in food-processing plants and laboratories.

Use two legs to hold up to 4,000 lbs. Adjust height in 1 1/2" increments with rivets that slide into keyhole slots.

These legs provide more leg room than other styles. Remove and reposition the bolts to adjust height in 1" increments.

Adjust the height of a workbench without clearing off the top or loosening leg bolts.

A corrosion-resistant, stainless steel surface and sealed, plastic laminate bottom make these tops suitable for food service.

Keep tools visible and organized above a workbench.

Position these shelves at any angle.

Mount these cabinets under a workbench to store larger items.

Stack these drawers under a workbench.

The work surface is positioned at a comfortable height for writing and working while standing.

Adjust the shelves to accommodate a computer and other electronic equipment.

Create a personalized work area by adding accessories. These workstations are often used for small-parts assembly.

Mix and match components to design an office work area that can be reconfigured as needed.

Add components such as clamps, brackets, stops, rests, mounting plates, fixturing squares, risers, and V-blocks to build fixtures for welding and assembly.

Precision ground to the tightest parallel tolerance, these steel plates have threaded and unthreaded holes in a grid pattern to support precise positioning and repeatability when machining.

An extra-long, reinforced tabletop gives you plenty of room for oversized loads.

These tables have a foot lever and hydraulic pump to raise loads and either a hand valve or hand lever for controlled lowering.

Turn the hand wheels to raise the load and tilt it up to 30° for a more ergonomic angle.

A battery-operated motor and a hydraulic pump do the work for you; they lift loads with the push of a button.

The turntable rotates to reduce reaching.

The tabletop can go as low as 3", making loading and unloading from the floor and pallets easier.

These tables come ready to operate.

A hydraulic pump and an air-driven motor do the work for you.

An air cylinder automatically returns the stand to your set height as you add or remove parts of the load.

Keep your heaviest tools and parts in a single cabinet, or stack them for more storage.

A pegboard holds tools and supplies, leaving the top shelf clear to transport other items or use as a work surface.

Raise and lower your robot arm on these workstations, placing them at the right height for each task.

Mix and match a variety of components to create a custom workstation for moving parts in and out of CNC machines or other similar applications.