Steel Rule Dies | McMaster-Carr

Filter by

Material

Thickness

Width

Length

Shape

Temper Rating

Heat Treatment

Hardness Rating

Hardness

Yield Strength

Elongation

Maximum Temperature

REACH Compliance

DFARS Compliance

RoHS Compliance

Specifications Met

Forward

How can we improve?

748 Products

About Carbon Steel, Alloy Steel, Spring Steel, and Cast Iron

Yield Strength: Not Rated
Hardness: Rockwell C50 (Very Hard)

1095 spring steel has a higher carbon content than 1075 spring steel for better wear resistance. It is often fabricated into parts that will be used under continual stress, such as spring clips and washers. This material is also known as blue-tempered steel.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

0.002" Thick. (-0.0002" to 0.0002" Tolerance)
Wd.	Lg., ft.	Heat Treatment	Mechanical Finish	Color		Each
3/4"	10	Hardened	Polished	Blue	000000	000000
3/4"	50	Hardened	Polished	Blue	000000	000000
1"	10	Hardened	Polished	Blue	00000000	00000
1"	50	Hardened	Polished	Blue	000000	000000
2"	5	Hardened	Polished	Blue	00000000	00000
2"	25	Hardened	Polished	Blue	000000	000000
3"	4	Hardened	Polished	Blue	00000000	00000
3"	25	Hardened	Polished	Blue	000000	000000
0.003" Thick. (-0.0003" to 0.0003" Tolerance)
1/2"	25	Hardened	Polished	Blue	00000000	00000
1/2"	100	Hardened	Polished	Blue	0000000	000000
1"	10	Hardened	Polished	Blue	000000	00000
1"	50	Hardened	Polished	Blue	000000	000000
2"	5	Hardened	Polished	Blue	000000	00000
2"	50	Hardened	Polished	Blue	00000000	000000
3"	5	Hardened	Polished	Blue	00000000	00000
3"	25	Hardened	Polished	Blue	000000	000000
0.004" Thick. (-0.0004" to 0.0004" Tolerance)
1/2"	25	Hardened	Polished	Blue	000000	00000
1/2"	100	Hardened	Polished	Blue	000000	000000
2"	5	Hardened	Polished	Blue	000000	00000
2"	50	Hardened	Polished	Blue	000000	000000
4"	4	Hardened	Polished	Blue	00000000	00000
4"	25	Hardened	Polished	Blue	00000000	000000
6"	2	Hardened	Polished	Blue	00000000	00000
6"	10	Hardened	Polished	Blue	0000000	00000
0.005" Thick. (-0.0005" to 0.0005" Tolerance)
1/4"	25	Hardened	Polished	Blue	000000	00000
1/4"	100	Hardened	Polished	Blue	0000000	00000
3/8"	25	Hardened	Polished	Blue	000000	00000
3/8"	100	Hardened	Polished	Blue	0000000	00000
1/2"	25	Hardened	Polished	Blue	000000	00000
1/2"	100	Hardened	Polished	Blue	0000000	000000
3/4"	10	Hardened	Polished	Blue	0000000	00000
3/4"	100	Hardened	Polished	Blue	0000000	000000
1"	10	Hardened	Polished	Blue	0000000	00000
1"	100	Hardened	Polished	Blue	0000000	000000
1 1/2"	10	Hardened	Polished	Blue	0000000	00000
1 1/2"	100	Hardened	Polished	Blue	0000000	000000
2"	5	Hardened	Polished	Blue	0000000	00000
2"	50	Hardened	Polished	Blue	0000000	000000
3"	5	Hardened	Polished	Blue	00000000	00000
3"	25	Hardened	Polished	Blue	0000000	00000
6"	2	Hardened	Polished	Blue	00000000	00000
6"	10	Hardened	Polished	Blue	0000000	00000
0.008" Thick. (-0.0008" to 0.0008" Tolerance)
1/4"	25	Hardened	Polished	Blue	0000000	00000
1/4"	100	Hardened	Polished	Blue	0000000	00000
3/8"	25	Hardened	Polished	Blue	0000000	00000
3/8"	100	Hardened	Polished	Blue	0000000	000000
1/2"	25	Hardened	Polished	Blue	00000000	00000
1/2"	100	Hardened	Polished	Blue	00000000	000000
3/4"	10	Hardened	Polished	Blue	0000000	00000
3/4"	100	Hardened	Polished	Blue	00000000	000000
1"	10	Hardened	Polished	Blue	0000000	00000
1"	100	Hardened	Polished	Blue	00000000	000000
2"	5	Hardened	Polished	Blue	0000000	00000
2"	50	Hardened	Polished	Blue	00000000	000000
3"	4	Hardened	Polished	Blue	00000000	00000
3"	25	Hardened	Polished	Blue	00000000	000000
6"	2	Hardened	Polished	Blue	00000000	00000
6"	10	Hardened	Polished	Blue	00000000	000000
0.01" Thick. (-0.001" to 0.001" Tolerance)
1/4"	25	Hardened	Polished	Blue	0000000	00000
1/4"	100	Hardened	Polished	Blue	00000000	00000
3/8"	25	Hardened	Polished	Blue	0000000	00000
3/8"	100	Hardened	Polished	Blue	00000000	000000
1/2"	25	Hardened	Polished	Blue	0000000	00000
1/2"	100	Hardened	Polished	Blue	00000000	000000
5/8"	25	Hardened	Polished	Blue	0000000	00000
5/8"	100	Hardened	Polished	Blue	00000000	000000
3/4"	25	Hardened	Polished	Blue	0000000	00000
3/4"	100	Hardened	Polished	Blue	00000000	000000
7/8"	10	Hardened	Polished	Blue	0000000	00000
7/8"	100	Hardened	Polished	Blue	00000000	000000
1"	10	Hardened	Polished	Blue	0000000	00000
1"	100	Hardened	Polished	Blue	00000000	000000
1 1/4"	10	Hardened	Polished	Blue	0000000	00000
1 1/4"	100	Hardened	Polished	Blue	00000000	000000
1 1/2"	10	Hardened	Polished	Blue	00000000	00000
1 1/2"	75	Hardened	Polished	Blue	00000000	000000
2"	10	Hardened	Polished	Blue	00000000	00000
2"	75	Hardened	Polished	Blue	00000000	000000
2 1/2"	5	Hardened	Polished	Blue	0000000	00000
2 1/2"	50	Hardened	Polished	Blue	00000000	000000
3"	5	Hardened	Polished	Blue	0000000	00000
3"	50	Hardened	Polished	Blue	00000000	000000
4"	5	Hardened	Polished	Blue	00000000	00000
4"	25	Hardened	Polished	Blue	00000000	000000
6"	4	Hardened	Polished	Blue	00000000	00000
6"	25	Hardened	Polished	Blue	00000000	000000
8"	3	Hardened	Polished	Blue	00000000	00000
8"	25	Hardened	Polished	Blue	00000000	000000
10"	3	Hardened	Polished	Blue	00000000	00000
10"	20	Hardened	Polished	Blue	00000000	000000
12 3/8"	2	Hardened	Polished	Blue	0000000	00000
12 3/8"	20	Hardened	Polished	Blue	00000000	000000
0.012" Thick. (-0.001" to 0.001" Tolerance)
3/16"	25	Hardened	Polished	Blue	0000000	00000
3/16"	100	Hardened	Polished	Blue	00000000	00000
1/4"	25	Hardened	Polished	Blue	0000000	00000
1/4"	100	Hardened	Polished	Blue	00000000	00000
3/8"	25	Hardened	Polished	Blue	0000000	00000
3/8"	100	Hardened	Polished	Blue	00000000	000000
1/2"	25	Hardened	Polished	Blue	0000000	00000
1/2"	100	Hardened	Polished	Blue	00000000	000000
3/4"	25	Hardened	Polished	Blue	00000000	00000
3/4"	100	Hardened	Polished	Blue	00000000	000000
1"	10	Hardened	Polished	Blue	0000000	00000
1"	100	Hardened	Polished	Blue	00000000	000000
2"	10	Hardened	Polished	Blue	00000000	00000
2"	50	Hardened	Polished	Blue	00000000	000000
3"	5	Hardened	Polished	Blue	0000000	00000
3"	50	Hardened	Polished	Blue	00000000	000000
4"	5	Hardened	Polished	Blue	00000000	00000
4"	25	Hardened	Polished	Blue	00000000	000000
6"	3	Hardened	Polished	Blue	00000000	00000
6"	25	Hardened	Polished	Blue	00000000	000000
8"	3	Hardened	Polished	Blue	00000000	00000
8"	20	Hardened	Polished	Blue	00000000	000000
10"	3	Hardened	Polished	Blue	00000000	00000
10"	20	Hardened	Polished	Blue	00000000	000000
12 3/8"	3	Hardened	Polished	Blue	00000000	00000
12 3/8"	20	Hardened	Polished	Blue	00000000	000000
0.015" Thick. (-0.001" to 0.001" Tolerance)
1/8"	25	Hardened	Polished	Blue	0000000	00000
1/8"	100	Hardened	Polished	Blue	00000000	00000
1/4"	25	Hardened	Polished	Blue	0000000	00000
1/4"	100	Hardened	Polished	Blue	00000000	00000
5/16"	25	Hardened	Polished	Blue	0000000	00000
5/16"	100	Hardened	Polished	Blue	00000000	000000
3/8"	25	Hardened	Polished	Blue	0000000	00000
3/8"	100	Hardened	Polished	Blue	00000000	000000
1/2"	25	Hardened	Polished	Blue	0000000	00000
1/2"	100	Hardened	Polished	Blue	00000000	000000
5/8"	25	Hardened	Polished	Blue	00000000	00000
5/8"	100	Hardened	Polished	Blue	00000000	000000
3/4"	10	Hardened	Polished	Blue	0000000	00000
3/4"	100	Hardened	Polished	Blue	00000000	000000
1"	10	Hardened	Polished	Blue	0000000	00000
1"	100	Hardened	Polished	Blue	00000000	000000
1 1/4"	10	Hardened	Polished	Blue	0000000	00000
1 1/4"	100	Hardened	Polished	Blue	00000000	000000
1 1/2"	10	Hardened	Polished	Blue	0000000	00000
1 1/2"	75	Hardened	Polished	Blue	00000000	000000
2"	10	Hardened	Polished	Blue	00000000	00000
2"	50	Hardened	Polished	Blue	00000000	000000
3"	5	Hardened	Polished	Blue	0000000	00000
3"	50	Hardened	Polished	Blue	00000000	000000
4"	4	Hardened	Polished	Blue	00000000	00000
4"	25	Hardened	Polished	Blue	00000000	000000
6"	3	Hardened	Polished	Blue	00000000	00000
6"	20	Hardened	Polished	Blue	00000000	000000
8"	2	Hardened	Polished	Blue	00000000	00000
8"	10	Hardened	Polished	Blue	00000000	00000
10"	2	Hardened	Polished	Blue	00000000	00000
10"	10	Hardened	Polished	Blue	00000000	00000
12 3/8"	2	Hardened	Polished	Blue	0000000	00000
12 3/8"	10	Hardened	Polished	Blue	00000000	000000
0.016" Thick. (-0.001" to 0.001" Tolerance)
1/4"	25	Hardened	Polished	Blue	0000000	00000
1/4"	100	Hardened	Polished	Blue	00000000	000000
1/2"	25	Hardened	Polished	Blue	0000000	00000
1/2"	100	Hardened	Polished	Blue	00000000	000000
5/8"	25	Hardened	Polished	Blue	00000000	00000
5/8"	100	Hardened	Polished	Blue	00000000	000000
3/4"	10	Hardened	Polished	Blue	0000000	00000
3/4"	100	Hardened	Polished	Blue	00000000	000000
1"	10	Hardened	Polished	Blue	0000000	00000
1"	100	Hardened	Polished	Blue	00000000	000000
1 1/2"	10	Hardened	Polished	Blue	00000000	00000
1 1/2"	75	Hardened	Polished	Blue	00000000	000000
3"	6	Hardened	Polished	Blue	00000000	00000
3"	25	Hardened	Polished	Blue	00000000	00000
8"	1	Hardened	Polished	Blue	00000000	00000
8"	10	Hardened	Polished	Blue	00000000	00000
12 3/8"	1	Hardened	Polished	Blue	00000000	00000
12 3/8"	10	Hardened	Polished	Blue	00000000	000000
0.02" Thick. (-0.001" to 0.001" Tolerance)
1/8"	25	Hardened	Polished	Blue	0000000	00000
1/8"	100	Hardened	Polished	Blue	00000000	00000
1/4"	25	Hardened	Polished	Blue	0000000	00000
1/4"	100	Hardened	Polished	Blue	00000000	00000
5/16"	25	Hardened	Polished	Blue	0000000	00000
5/16"	100	Hardened	Polished	Blue	00000000	00000
3/8"	25	Hardened	Polished	Blue	0000000	00000
3/8"	100	Hardened	Polished	Blue	00000000	00000
1/2"	25	Hardened	Polished	Blue	0000000	00000
1/2"	100	Hardened	Polished	Blue	00000000	000000
5/8"	10	Hardened	Polished	Blue	0000000	00000
5/8"	100	Hardened	Polished	Blue	00000000	000000
3/4"	10	Hardened	Polished	Blue	0000000	00000
3/4"	100	Hardened	Polished	Blue	00000000	000000
1"	10	Hardened	Polished	Blue	0000000	00000
1"	100	Hardened	Polished	Blue	00000000	000000
1 1/2"	10	Hardened	Polished	Blue	00000000	00000
1 1/2"	50	Hardened	Polished	Blue	00000000	000000
2"	10	Hardened	Polished	Blue	0000000	00000
2"	50	Hardened	Polished	Blue	00000000	00000
3"	5	Hardened	Polished	Blue	00000000	00000
3"	25	Hardened	Polished	Blue	00000000	00000
4"	4	Hardened	Polished	Blue	00000000	00000
4"	25	Hardened	Polished	Blue	00000000	000000
6"	3	Hardened	Polished	Blue	00000000	00000
6"	20	Hardened	Polished	Blue	00000000	000000
8"	2	Hardened	Polished	Blue	00000000	00000
8"	10	Hardened	Polished	Blue	00000000	00000
10"	2	Hardened	Polished	Blue	00000000	00000
10"	10	Hardened	Polished	Blue	0000000	000000
12 3/8"	2	Hardened	Polished	Blue	0000000	00000
12 3/8"	6	Hardened	Polished	Blue	00000000	000000
0.025" Thick. (-0.001" to 0.001" Tolerance)
1/4"	25	Hardened	Polished	Blue	0000000	00000
1/4"	100	Hardened	Polished	Blue	00000000	00000
5/16"	25	Hardened	Polished	Blue	0000000	00000
5/16"	100	Hardened	Polished	Blue	00000000	00000
3/8"	25	Hardened	Polished	Blue	00000000	00000
3/8"	100	Hardened	Polished	Blue	00000000	000000
1/2"	10	Hardened	Polished	Blue	0000000	00000
1/2"	100	Hardened	Polished	Blue	00000000	000000
5/8"	10	Hardened	Polished	Blue	0000000	00000
5/8"	100	Hardened	Polished	Blue	00000000	000000
3/4"	10	Hardened	Polished	Blue	0000000	00000
3/4"	100	Hardened	Polished	Blue	00000000	000000
7/8"	10	Hardened	Polished	Blue	0000000	00000
7/8"	100	Hardened	Polished	Blue	00000000	000000
1"	10	Hardened	Polished	Blue	0000000	00000
1"	75	Hardened	Polished	Blue	00000000	000000
1 1/4"	5	Hardened	Polished	Blue	00000000	00000
1 1/4"	50	Hardened	Polished	Blue	00000000	00000
1 1/2"	5	Hardened	Polished	Blue	00000000	00000
1 1/2"	50	Hardened	Polished	Blue	00000000	00000
2"	5	Hardened	Polished	Blue	00000000	00000
2"	50	Hardened	Polished	Blue	00000000	000000
3"	4	Hardened	Polished	Blue	00000000	00000
3"	25	Hardened	Polished	Blue	00000000	00000
4"	3	Hardened	Polished	Blue	00000000	00000
4"	10	Hardened	Polished	Blue	00000000	00000
6"	2	Hardened	Polished	Blue	00000000	00000
6"	10	Hardened	Polished	Blue	00000000	00000
8"	2	Hardened	Polished	Blue	00000000	00000
8"	10	Hardened	Polished	Blue	00000000	000000
10"	2	Hardened	Polished	Blue	00000000	00000
10"	10	Hardened	Polished	Blue	00000000	000000
12 3/8"	2	Hardened	Polished	Blue	0000000	00000
12 3/8"	5	Hardened	Polished	Blue	00000000	000000
0.028" Thick. (-0.001" to 0.001" Tolerance)
1/8"	25	Hardened	Polished	Blue	00000000	00000
1/8"	100	Hardened	Polished	Blue	00000000	00000
1/4"	25	Hardened	Polished	Blue	00000000	00000
1/4"	100	Hardened	Polished	Blue	00000000	00000
3/8"	25	Hardened	Polished	Blue	00000000	00000
3/8"	100	Hardened	Polished	Blue	00000000	000000
1/2"	10	Hardened	Polished	Blue	00000000	00000
1/2"	100	Hardened	Polished	Blue	00000000	000000
5/8"	10	Hardened	Polished	Blue	00000000	00000
5/8"	100	Hardened	Polished	Blue	00000000	000000
3/4"	10	Hardened	Polished	Blue	00000000	00000
3/4"	100	Hardened	Polished	Blue	00000000	000000
1"	10	Hardened	Polished	Blue	00000000	00000
1"	75	Hardened	Polished	Blue	00000000	000000
2"	5	Hardened	Polished	Blue	00000000	00000
2"	25	Hardened	Polished	Blue	00000000	000000
3"	4	Hardened	Polished	Blue	00000000	00000
3"	25	Hardened	Polished	Blue	00000000	000000
6"	2	Hardened	Polished	Blue	00000000	00000
6"	10	Hardened	Polished	Blue	00000000	00000
8"	2	Hardened	Polished	Blue	00000000	00000
8"	10	Hardened	Polished	Blue	00000000	000000
10"	1	Hardened	Polished	Blue	00000000	00000
10"	9	Hardened	Polished	Blue	0000000	000000
0.03" Thick. (-0.002" to 0.002" Tolerance)
6"	2	Hardened	Polished	Blue	00000000	00000
6"	10	Hardened	Polished	Blue	00000000	00000
8"	2	Hardened	Polished	Blue	00000000	00000
8"	10	Hardened	Polished	Blue	00000000	000000
10"	1	Hardened	Polished	Blue	00000000	00000
10"	10	Hardened	Polished	Blue	00000000	000000
12 3/8"	1	Hardened	Polished	Blue	00000000	00000
12 3/8"	5	Hardened	Polished	Blue	00000000	00000
0.032" Thick. (-0.002" to 0.002" Tolerance)
3/16"	25	Hardened	Polished	Blue	00000000	00000
3/16"	100	Hardened	Polished	Blue	00000000	00000
1/4"	25	Hardened	Polished	Blue	00000000	00000
1/4"	100	Hardened	Polished	Blue	00000000	00000
5/16"	25	Hardened	Polished	Blue	00000000	00000
5/16"	100	Hardened	Polished	Blue	00000000	00000
3/8"	25	Hardened	Polished	Blue	00000000	00000
3/8"	100	Hardened	Polished	Blue	00000000	000000
1/2"	20	Hardened	Polished	Blue	00000000	00000
1/2"	100	Hardened	Polished	Blue	00000000	000000
5/8"	10	Hardened	Polished	Blue	00000000	00000
5/8"	100	Hardened	Polished	Blue	00000000	000000
3/4"	10	Hardened	Polished	Blue	00000000	00000
3/4"	100	Hardened	Polished	Blue	00000000	000000
1"	10	Hardened	Polished	Blue	00000000	00000
1"	50	Hardened	Polished	Blue	00000000	00000
1 1/4"	10	Hardened	Polished	Blue	00000000	00000
1 1/4"	50	Hardened	Polished	Blue	00000000	00000
1 1/2"	5	Hardened	Polished	Blue	00000000	00000
1 1/2"	50	Hardened	Polished	Blue	00000000	00000
2"	5	Hardened	Polished	Blue	00000000	00000
2"	25	Hardened	Polished	Blue	00000000	000000
2 1/2"	3	Hardened	Polished	Blue	00000000	00000
2 1/2"	20	Hardened	Polished	Blue	00000000	000000
3"	4	Hardened	Polished	Blue	00000000	00000
3"	20	Hardened	Polished	Blue	00000000	000000
4"	3	Hardened	Polished	Blue	00000000	00000
4"	20	Hardened	Polished	Blue	00000000	000000
6"	2	Hardened	Polished	Blue	00000000	00000
6"	10	Hardened	Polished	Blue	00000000	00000
8"	2	Hardened	Polished	Blue	00000000	00000
8"	10	Hardened	Polished	Blue	00000000	000000
10"	2	Hardened	Polished	Blue	00000000	00000
10"	10	Hardened	Polished	Blue	00000000	000000
12 3/8"	2	Hardened	Polished	Blue	0000000	00000
12 3/8"	5	Hardened	Polished	Blue	00000000	00000
0.035" Thick. (-0.002" to 0.002" Tolerance)
1/4"	25	Hardened	Polished	Blue	00000000	00000
1/4"	100	Hardened	Polished	Blue	00000000	00000
3/8"	10	Hardened	Polished	Blue	00000000	00000
3/8"	100	Hardened	Polished	Blue	00000000	000000
1/2"	10	Hardened	Polished	Blue	00000000	00000
1/2"	100	Hardened	Polished	Blue	00000000	000000
3/4"	10	Hardened	Polished	Blue	00000000	00000
3/4"	75	Hardened	Polished	Blue	00000000	00000
1"	10	Hardened	Polished	Blue	00000000	00000
1"	50	Hardened	Polished	Blue	00000000	00000
1 1/2"	5	Hardened	Polished	Blue	00000000	00000
1 1/2"	50	Hardened	Polished	Blue	00000000	00000
2"	5	Hardened	Polished	Blue	00000000	00000
2"	25	Hardened	Polished	Blue	00000000	000000
3"	3	Hardened	Polished	Blue	00000000	00000
3"	20	Hardened	Polished	Blue	00000000	000000
6"	2	Hardened	Polished	Blue	00000000	00000
6"	10	Hardened	Polished	Blue	00000000	00000
8"	2	Hardened	Polished	Blue	00000000	00000
8"	10	Hardened	Polished	Blue	00000000	000000
10"	1	Hardened	Polished	Blue	00000000	00000
10"	7	Hardened	Polished	Blue	0000000	000000
12 3/8"	2	Hardened	Polished	Blue	0000000	00000
12 3/8"	7	Hardened	Polished	Blue	0000000	000000
0.042" Thick. (-0.002" to 0.002" Tolerance)
1/4"	25	Hardened	Polished	Blue	00000000	00000
1/4"	100	Hardened	Polished	Blue	00000000	00000
3/8"	10	Hardened	Polished	Blue	00000000	00000
3/8"	100	Hardened	Polished	Blue	00000000	000000
1/2"	10	Hardened	Polished	Blue	00000000	00000
1/2"	100	Hardened	Polished	Blue	00000000	000000
5/8"	10	Hardened	Polished	Blue	00000000	00000
5/8"	75	Hardened	Polished	Blue	00000000	000000
3/4"	10	Hardened	Polished	Blue	00000000	00000
3/4"	50	Hardened	Polished	Blue	00000000	00000
1"	10	Hardened	Polished	Blue	00000000	00000
1"	50	Hardened	Polished	Blue	00000000	00000
1 1/4"	5	Hardened	Polished	Blue	00000000	00000
1 1/4"	50	Hardened	Polished	Blue	00000000	00000
1 1/2"	5	Hardened	Polished	Blue	00000000	00000
1 1/2"	25	Hardened	Polished	Blue	00000000	00000
2"	4	Hardened	Polished	Blue	00000000	00000
2"	25	Hardened	Polished	Blue	00000000	000000
3"	3	Hardened	Polished	Blue	00000000	00000
3"	20	Hardened	Polished	Blue	00000000	000000
4"	2	Hardened	Polished	Blue	00000000	00000
4"	10	Hardened	Polished	Blue	00000000	00000
6"	2	Hardened	Polished	Blue	00000000	00000
6"	9	Hardened	Polished	Blue	00000000	00000
8"	1	Hardened	Polished	Blue	00000000	00000
8"	7	Hardened	Polished	Blue	0000000	000000
10"	1	Hardened	Polished	Blue	00000000	00000
10"	5	Hardened	Polished	Blue	0000000	000000
12 3/8"	2	Hardened	Polished	Blue	0000000	00000
12 3/8"	5	Hardened	Polished	Blue	0000000	000000
0.05" Thick. (-0.002" to 0.002" Tolerance)
3/16"	25	Hardened	Polished	Blue	00000000	00000
3/16"	100	Hardened	Polished	Blue	00000000	00000
1/4"	25	Hardened	Polished	Blue	00000000	00000
1/4"	100	Hardened	Polished	Blue	00000000	00000
3/8"	10	Hardened	Polished	Blue	00000000	00000
3/8"	100	Hardened	Polished	Blue	00000000	000000
1/2"	10	Hardened	Polished	Blue	00000000	00000
1/2"	100	Hardened	Polished	Blue	00000000	000000
5/8"	10	Hardened	Polished	Blue	00000000	00000
5/8"	50	Hardened	Polished	Blue	00000000	00000
3/4"	10	Hardened	Polished	Blue	00000000	00000
3/4"	50	Hardened	Polished	Blue	00000000	000000
1"	5	Hardened	Polished	Blue	00000000	00000
1"	50	Hardened	Polished	Blue	00000000	000000
1 1/4"	5	Hardened	Polished	Blue	00000000	00000
1 1/4"	25	Hardened	Polished	Blue	00000000	00000
1 1/2"	4	Hardened	Polished	Blue	00000000	00000
1 1/2"	25	Hardened	Polished	Blue	00000000	000000
2"	4	Hardened	Polished	Blue	00000000	00000
2"	25	Hardened	Polished	Blue	00000000	000000
3"	2	Hardened	Polished	Blue	00000000	00000
3"	10	Hardened	Polished	Blue	00000000	00000
4"	2	Hardened	Polished	Blue	00000000	00000
4"	10	Hardened	Polished	Blue	00000000	00000
6"	1	Hardened	Polished	Blue	00000000	00000
6"	7 1/2	Hardened	Polished	Blue	00000000	000000
8"	1	Hardened	Polished	Blue	00000000	00000
8"	6	Hardened	Polished	Blue	0000000	000000
10"	1	Hardened	Polished	Blue	00000000	00000
10"	4	Hardened	Polished	Blue	0000000	000000
12 3/8"	2	Hardened	Polished	Blue	0000000	00000
12 3/8"	3	Hardened	Polished	Blue	00000000	000000
0.062" Thick. (-0.002" to 0.002" Tolerance)
3/16"	25	Hardened	Polished	Blue	00000000	00000
1/4"	10	Hardened	Polished	Blue	00000000	00000
1/4"	100	Hardened	Polished	Blue	00000000	000000
3/8"	10	Hardened	Polished	Blue	00000000	00000
3/8"	100	Hardened	Polished	Blue	00000000	000000
1/2"	10	Hardened	Polished	Blue	00000000	00000
1/2"	50	Hardened	Polished	Blue	00000000	00000
5/8"	5	Hardened	Polished	Blue	00000000	00000
5/8"	50	Hardened	Polished	Blue	00000000	000000
3/4"	5	Hardened	Polished	Blue	00000000	00000
3/4"	50	Hardened	Polished	Blue	00000000	000000
1"	5	Hardened	Polished	Blue	00000000	00000
1"	25	Hardened	Polished	Blue	00000000	00000
1 1/4"	4	Hardened	Polished	Blue	00000000	00000
1 1/4"	25	Hardened	Polished	Blue	00000000	000000
1 1/2"	4	Hardened	Polished	Blue	00000000	00000
1 1/2"	25	Hardened	Polished	Blue	00000000	000000
1 3/4"	3	Hardened	Polished	Blue	00000000	00000
1 3/4"	20	Hardened	Polished	Blue	00000000	000000
2"	3	Hardened	Polished	Blue	00000000	00000
2"	20	Hardened	Polished	Blue	00000000	000000
2 1/2"	2	Hardened	Polished	Blue	00000000	00000
2 1/2"	10	Hardened	Polished	Blue	00000000	00000
3"	2	Hardened	Polished	Blue	00000000	00000
3"	10	Hardened	Polished	Blue	00000000	00000
4"	1	Hardened	Polished	Blue	00000000	00000
4"	7	Hardened	Polished	Blue	00000000	000000
6"	1	Hardened	Polished	Blue	00000000	00000
6"	6 1/2	Hardened	Polished	Blue	00000000	000000
8"	1	Hardened	Polished	Blue	00000000	00000
8"	5	Hardened	Polished	Blue	00000000	000000
10"	1	Hardened	Polished	Blue	00000000	00000
10"	3 1/2	Hardened	Polished	Blue	00000000	000000
12 3/8"	1	Hardened	Polished	Blue	00000000	00000
12 3/8"	2	Hardened	Polished	Blue	0000000	00000

Easy-to-Form Wear-Resistant 1095 Spring Steel Sheets

Yield Strength: Not Rated
Hardness: Rockwell B90 (Medium)
Heat Treatable: Yes
Max. Hardness After Heat Treatment: Not Rated

These sheets have a softened temper, which is also known as annealed, so they can be easily formed into shape and then heat treated for spring properties. 1095 spring steel has a higher carbon content than 1075 spring steel for better wear resistance. It is often fabricated into parts that will be used under continual stress, such as spring clips and washers.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

3" × 3"
Thick.	Thick. Tolerance	Heat Treatment	Flatness Tolerance		Each
0.015"	-0.002" to 0.002"	Annealed (Softened)	3/8"	00000000	000000
0.02"	-0.002" to 0.002"	Annealed (Softened)	3/8"	00000000	00000
0.025"	-0.002" to 0.002"	Annealed (Softened)	3/8"	00000000	00000
0.032"	-0.002" to 0.002"	Annealed (Softened)	3/8"	00000000	00000
0.035"	-0.002" to 0.002"	Annealed (Softened)	3/8"	00000000	00000
0.042"	-0.002" to 0.002"	Annealed (Softened)	3/8"	00000000	00000
0.05"	-0.002" to 0.002"	Annealed (Softened)	3/8"	00000000	00000
0.062"	-0.002" to 0.002"	Annealed (Softened)	3/8"	00000000	00000
0.065"	-0.002" to 0.002"	Annealed (Softened)	3/8"	00000000	00000
0.072"	-0.002" to 0.002"	Annealed (Softened)	3/8"	00000000	00000
0.078"	-0.002" to 0.002"	Annealed (Softened)	3/8"	00000000	00000
0.083"	-0.002" to 0.002"	Annealed (Softened)	3/8"	00000000	00000
0.109"	-0.003" to 0.003"	Annealed (Softened)	3/8"	00000000	00000
1/8"	-0.003" to 0.003"	Annealed (Softened)	3/8"	00000000	00000
0.134"	-0.003" to 0.003"	Annealed (Softened)	3/8"	00000000	00000
0.156"	-0.003" to 0.003"	Annealed (Softened)	3/8"	00000000	00000
0.187"	-0.003" to 0.003"	Annealed (Softened)	3/8"	00000000	00000
8" × 12"
0.015"	-0.002" to 0.002"	Annealed (Softened)	3/8"	00000000	00000
0.02"	-0.002" to 0.002"	Annealed (Softened)	3/8"	00000000	00000
0.025"	-0.002" to 0.002"	Annealed (Softened)	3/8"	0000000	00000
0.032"	-0.002" to 0.002"	Annealed (Softened)	3/8"	0000000	00000
0.035"	-0.002" to 0.002"	Annealed (Softened)	3/8"	0000000	00000
0.042"	-0.002" to 0.002"	Annealed (Softened)	3/8"	0000000	00000
0.05"	-0.002" to 0.002"	Annealed (Softened)	3/8"	0000000	00000
0.062"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
0.065"	-0.002" to 0.002"	Annealed (Softened)	3/8"	00000000	00000
0.072"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
0.078"	-0.002" to 0.002"	Annealed (Softened)	3/8"	00000000	00000
0.083"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
0.094"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
0.109"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
1/8"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
0.134"	-0.003" to 0.003"	Annealed (Softened)	3/8"	00000000	00000
0.156"	-0.003" to 0.003"	Annealed (Softened)	3/8"	00000000	00000
0.187"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
8" × 24"
0.015"	-0.002" to 0.002"	Annealed (Softened)	3/8"	00000000	00000
0.02"	-0.002" to 0.002"	Annealed (Softened)	3/8"	00000000	00000
0.025"	-0.002" to 0.002"	Annealed (Softened)	3/8"	0000000	00000
0.032"	-0.002" to 0.002"	Annealed (Softened)	3/8"	0000000	00000
0.035"	-0.002" to 0.002"	Annealed (Softened)	3/8"	0000000	00000
0.042"	-0.002" to 0.002"	Annealed (Softened)	3/8"	0000000	00000
0.05"	-0.002" to 0.002"	Annealed (Softened)	3/8"	0000000	00000
0.062"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
0.072"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
0.078"	-0.002" to 0.002"	Annealed (Softened)	3/8"	00000000	00000
0.083"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
0.094"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
0.109"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
1/8"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	00000
0.134"	-0.003" to 0.003"	Annealed (Softened)	3/8"	00000000	00000
0.156"	-0.003" to 0.003"	Annealed (Softened)	3/8"	00000000	00000
0.187"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	000000
15" × 48"
0.02"	-0.002" to 0.002"	Annealed (Softened)	3/8"	00000000	00000
0.025"	-0.002" to 0.002"	Annealed (Softened)	3/8"	0000000	00000
0.032"	-0.002" to 0.002"	Annealed (Softened)	3/8"	0000000	00000
0.035"	-0.002" to 0.002"	Annealed (Softened)	3/8"	0000000	00000
0.042"	-0.002" to 0.002"	Annealed (Softened)	3/8"	0000000	00000
0.05"	-0.002" to 0.002"	Annealed (Softened)	3/8"	0000000	000000
0.062"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	000000
0.072"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	000000
0.083"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	000000
0.094"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	000000
0.109"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	000000
1/8"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	000000
0.187"	-0.003" to 0.003"	Annealed (Softened)	3/8"	0000000	000000
24" × 24"
0.02"	-0.002" to 0.002"	Annealed (Softened)	3/8"	00000000	00000
0.025"	-0.002" to 0.002"	Annealed (Softened)	3/8"	00000000	00000
0.032"	-0.002" to 0.002"	Annealed (Softened)	3/8"	00000000	00000
0.035"	-0.002" to 0.002"	Annealed (Softened)	3/8"	00000000	00000
0.042"	-0.002" to 0.002"	Annealed (Softened)	3/8"	00000000	00000
0.05"	-0.002" to 0.002"	Annealed (Softened)	3/8"	00000000	00000
0.062"	-0.002" to 0.002"	Annealed (Softened)	3/8"	00000000	00000
0.065"	-0.002" to 0.002"	Annealed (Softened)	3/8"	00000000	00000
0.072"	-0.002" to 0.002"	Annealed (Softened)	3/8"	00000000	00000
0.078"	-0.002" to 0.002"	Annealed (Softened)	3/8"	00000000	00000
0.094"	-0.003" to 0.003"	Annealed (Softened)	3/8"	00000000	00000
0.109"	-0.003" to 0.003"	Annealed (Softened)	3/8"	00000000	000000
1/8"	-0.003" to 0.003"	Annealed (Softened)	3/8"	00000000	000000
0.134"	-0.003" to 0.003"	Annealed (Softened)	3/8"	00000000	000000
0.156"	-0.003" to 0.003"	Annealed (Softened)	3/8"	00000000	000000
0.187"	-0.003" to 0.003"	Annealed (Softened)	3/8"	00000000	000000
24" × 48"
0.02"	-0.002" to 0.002"	Annealed (Softened)	3/8"	00000000	00000
0.025"	-0.002" to 0.002"	Annealed (Softened)	3/8"	00000000	000000
0.032"	-0.002" to 0.002"	Annealed (Softened)	3/8"	00000000	000000
0.035"	-0.002" to 0.002"	Annealed (Softened)	3/8"	00000000	000000
0.042"	-0.002" to 0.002"	Annealed (Softened)	3/8"	00000000	000000
0.05"	-0.002" to 0.002"	Annealed (Softened)	3/8"	00000000	000000
0.062"	-0.002" to 0.002"	Annealed (Softened)	3/8"	00000000	000000
0.065"	-0.002" to 0.002"	Annealed (Softened)	3/8"	00000000	000000
0.072"	-0.002" to 0.002"	Annealed (Softened)	3/8"	00000000	000000
0.078"	-0.002" to 0.002"	Annealed (Softened)	3/8"	00000000	000000
0.083"	-0.002" to 0.002"	Annealed (Softened)	3/8"	00000000	000000
0.094"	-0.003" to 0.003"	Annealed (Softened)	3/8"	00000000	000000
0.109"	-0.003" to 0.003"	Annealed (Softened)	3/8"	00000000	000000
1/8"	-0.003" to 0.003"	Annealed (Softened)	3/8"	00000000	000000
0.134"	-0.003" to 0.003"	Annealed (Softened)	3/8"	00000000	000000
0.156"	-0.003" to 0.003"	Annealed (Softened)	3/8"	00000000	000000
0.187"	-0.003" to 0.003"	Annealed (Softened)	3/8"	00000000	000000

Fatigue-Resistant 301 Stainless Steel

Able to withstand repeated stress and wear, 301 stainless steel has the strength required for applications such as springs and fasteners. It maintains its corrosion resistance in temperatures up to 1550° F.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Sheets

6" × 6"
Thick.	Thick. Tolerance	Yield Strength, psi	Fabrication	Hardness	Specifications Met		Each
1/4 Hard Temper
0.015"	-0.0015" to 0.0015"	75,000	Cold Worked	Rockwell C25 (Hard)	ASTM A666, SAE AMS5517	00000000	000000
0.024"	-0.002" to 0.002"	75,000	Cold Worked	Rockwell C25 (Hard)	ASTM A666, SAE AMS5517	00000000	00000
0.029"	-0.003" to 0.003"	75,000	Cold Worked	Rockwell C25 (Hard)	ASTM A666, SAE AMS5517	00000000	00000
0.042"	-0.003" to 0.003"	75,000	Cold Worked	Rockwell C25 (Hard)	ASTM A666, SAE AMS5517	00000000	00000
0.048"	-0.003" to 0.003"	75,000	Cold Worked	Rockwell C25 (Hard)	ASTM A666, SAE AMS5517	00000000	00000
0.063"	-0.003" to 0.003"	75,000	Cold Worked	Rockwell C25 (Hard)	ASTM A666, SAE AMS5517	00000000	00000
0.076"	-0.004" to 0.004"	75,000	Cold Worked	Rockwell C25 (Hard)	ASTM A666, SAE AMS5517	00000000	00000
1/2 Hard Temper
0.015"	-0.0015" to 0.0015"	110,000	Cold Worked	Rockwell C30 (Hard)	ASTM A666, SAE AMS5518	00000000	00000
0.024"	-0.002" to 0.002"	110,000	Cold Worked	Rockwell C30 (Hard)	ASTM A666, SAE AMS5518	00000000	00000
0.029"	-0.003" to 0.003"	110,000	Cold Worked	Rockwell C30 (Hard)	ASTM A666, SAE AMS5518	00000000	00000
0.042"	-0.003" to 0.003"	110,000	Cold Worked	Rockwell C30 (Hard)	ASTM A666, SAE AMS5518	00000000	00000
0.048"	-0.003" to 0.003"	110,000	Cold Worked	Rockwell C30 (Hard)	ASTM A666, SAE AMS5518	00000000	00000
0.063"	-0.003" to 0.003"	110,000	Cold Worked	Rockwell C30 (Hard)	ASTM A666, SAE AMS5518	00000000	00000
0.076"	-0.004" to 0.004"	110,000	Cold Worked	Rockwell C30 (Hard)	ASTM A666, SAE AMS5518	00000000	00000
Full Hard Temper
0.015"	-0.0015" to 0.0015"	140,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.024"	-0.002" to 0.002"	140,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.029"	-0.003" to 0.003"	140,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.042"	-0.003" to 0.003"	140,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.048"	-0.003" to 0.003"	140,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.063"	-0.003" to 0.003"	140,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
12" × 12"
1/4 Hard Temper
0.015"	-0.0015" to 0.0015"	75,000	Cold Worked	Rockwell C25 (Hard)	ASTM A666, SAE AMS5517	0000000	00000
0.024"	-0.002" to 0.002"	75,000	Cold Worked	Rockwell C25 (Hard)	ASTM A666, SAE AMS5517	0000000	00000
0.029"	-0.003" to 0.003"	75,000	Cold Worked	Rockwell C25 (Hard)	ASTM A666, SAE AMS5517	0000000	00000
0.042"	-0.003" to 0.003"	75,000	Cold Worked	Rockwell C25 (Hard)	ASTM A666, SAE AMS5517	0000000	00000
0.048"	-0.003" to 0.003"	75,000	Cold Worked	Rockwell C25 (Hard)	ASTM A666, SAE AMS5517	0000000	00000
0.063"	-0.003" to 0.003"	75,000	Cold Worked	Rockwell C25 (Hard)	ASTM A666, SAE AMS5517	0000000	00000
0.076"	-0.004" to 0.004"	75,000	Cold Worked	Rockwell C25 (Hard)	ASTM A666, SAE AMS5517	0000000	00000
1/2 Hard Temper
0.015"	-0.0015" to 0.0015"	110,000	Cold Worked	Rockwell C30 (Hard)	ASTM A666, SAE AMS5518	0000000	00000
0.024"	-0.002" to 0.002"	110,000	Cold Worked	Rockwell C30 (Hard)	ASTM A666, SAE AMS5518	0000000	00000
0.029"	-0.003" to 0.003"	110,000	Cold Worked	Rockwell C30 (Hard)	ASTM A666, SAE AMS5518	0000000	00000
0.042"	-0.003" to 0.003"	110,000	Cold Worked	Rockwell C30 (Hard)	ASTM A666, SAE AMS5518	0000000	00000
0.048"	-0.003" to 0.003"	110,000	Cold Worked	Rockwell C30 (Hard)	ASTM A666, SAE AMS5518	0000000	00000
0.063"	-0.003" to 0.003"	110,000	Cold Worked	Rockwell C30 (Hard)	ASTM A666, SAE AMS5518	0000000	00000
0.076"	-0.004" to 0.004"	110,000	Cold Worked	Rockwell C30 (Hard)	ASTM A666, SAE AMS5518	0000000	00000
Full Hard Temper
0.015"	-0.0015" to 0.0015"	140,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.024"	-0.002" to 0.002"	140,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.029"	-0.003" to 0.003"	140,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.042"	-0.003" to 0.003"	140,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.048"	-0.003" to 0.003"	140,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.063"	-0.003" to 0.003"	140,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
12" × 36"
1/4 Hard Temper
0.015"	-0.0015" to 0.0015"	75,000	Cold Worked	Rockwell C25 (Hard)	ASTM A666, SAE AMS5517	0000000	00000
0.024"	-0.002" to 0.002"	75,000	Cold Worked	Rockwell C25 (Hard)	ASTM A666, SAE AMS5517	0000000	00000
0.029"	-0.003" to 0.003"	75,000	Cold Worked	Rockwell C25 (Hard)	ASTM A666, SAE AMS5517	0000000	00000
0.042"	-0.003" to 0.003"	75,000	Cold Worked	Rockwell C25 (Hard)	ASTM A666, SAE AMS5517	0000000	00000
0.048"	-0.003" to 0.003"	75,000	Cold Worked	Rockwell C25 (Hard)	ASTM A666, SAE AMS5517	0000000	00000
0.063"	-0.003" to 0.003"	75,000	Cold Worked	Rockwell C25 (Hard)	ASTM A666, SAE AMS5517	0000000	000000
0.076"	-0.004" to 0.004"	75,000	Cold Worked	Rockwell C25 (Hard)	ASTM A666, SAE AMS5517	0000000	000000
1/2 Hard Temper
0.015"	-0.0015" to 0.0015"	110,000	Cold Worked	Rockwell C30 (Hard)	ASTM A666, SAE AMS5518	0000000	00000
0.024"	-0.002" to 0.002"	110,000	Cold Worked	Rockwell C30 (Hard)	ASTM A666, SAE AMS5518	0000000	00000
0.029"	-0.003" to 0.003"	110,000	Cold Worked	Rockwell C30 (Hard)	ASTM A666, SAE AMS5518	0000000	00000
0.042"	-0.003" to 0.003"	110,000	Cold Worked	Rockwell C30 (Hard)	ASTM A666, SAE AMS5518	0000000	00000
0.048"	-0.003" to 0.003"	110,000	Cold Worked	Rockwell C30 (Hard)	ASTM A666, SAE AMS5518	0000000	00000
0.063"	-0.003" to 0.003"	110,000	Cold Worked	Rockwell C30 (Hard)	ASTM A666, SAE AMS5518	0000000	000000
0.076"	-0.004" to 0.004"	110,000	Cold Worked	Rockwell C30 (Hard)	ASTM A666, SAE AMS5518	0000000	000000
Full Hard Temper
0.015"	-0.0015" to 0.0015"	140,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.024"	-0.002" to 0.002"	140,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.029"	-0.003" to 0.003"	140,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.042"	-0.003" to 0.003"	140,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.048"	-0.003" to 0.003"	140,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.063"	-0.003" to 0.003"	140,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	000000

Spring Temper
Thick.	Thick. Tolerance	Wd.	Lg., ft.	Yield Strength, psi	Fabrication	Hardness	Specifications Met		Each
0.002"	-0.0002" to 0.0002"	12"	1	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	000000
0.002"	-0.0002" to 0.0002"	12"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.003"	-0.0003" to 0.0003"	12"	1	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.003"	-0.0003" to 0.0003"	12"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.004"	-0.0003" to 0.0003"	12"	1	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.004"	-0.0003" to 0.0003"	12"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.005"	-0.0003" to 0.0003"	12"	1	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.005"	-0.0003" to 0.0003"	12"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.006"	-0.0004" to 0.0004"	12"	1	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.006"	-0.0004" to 0.0004"	12"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.008"	-0.0004" to 0.0004"	6"	1	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.008"	-0.0004" to 0.0004"	6"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.008"	-0.0004" to 0.0004"	8"	1	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.008"	-0.0004" to 0.0004"	8"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.008"	-0.0004" to 0.0004"	12"	1	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.008"	-0.0004" to 0.0004"	12"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.01"	-0.0007" to 0.0007"	6"	1	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.01"	-0.0007" to 0.0007"	12"	1	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.012"	-0.001" to 0.001"	12"	1	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.015"	-0.001" to 0.001"	6"	1	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.015"	-0.001" to 0.001"	6"	20	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.015"	-0.001" to 0.001"	8"	1	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.015"	-0.001" to 0.001"	8"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.015"	-0.001" to 0.001"	10"	1	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.015"	-0.001" to 0.001"	10"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.015"	-0.001" to 0.001"	12"	1	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.015"	-0.001" to 0.001"	12"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.02"	-0.001" to 0.001"	6"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.02"	-0.001" to 0.001"	12"	1	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.025"	-0.001" to 0.001"	6"	1	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.025"	-0.001" to 0.001"	12"	1	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.031"	-0.0015" to 0.0015"	6"	1	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.031"	-0.0015" to 0.0015"	12"	1	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000

Strips

Spring Temper
Thick.	Thick. Tolerance	Wd.	Lg., ft.	Yield Strength, psi	Fabrication	Hardness	Specifications Met		Each
0.002"	-0.0002" to 0.0002"	2"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	000000
0.003"	-0.0003" to 0.0003"	2"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.003"	-0.0003" to 0.0003"	2"	50	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.004"	-0.0003" to 0.0003"	1"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.004"	-0.0003" to 0.0003"	1"	50	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.004"	-0.0003" to 0.0003"	2"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.004"	-0.0003" to 0.0003"	2"	50	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.004"	-0.0003" to 0.0003"	4"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.005"	-0.0003" to 0.0003"	1/8"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.005"	-0.0003" to 0.0003"	1/8"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.005"	-0.0003" to 0.0003"	1/4"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.005"	-0.0003" to 0.0003"	1/4"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.005"	-0.0003" to 0.0003"	1/2"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.005"	-0.0003" to 0.0003"	1/2"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.005"	-0.0003" to 0.0003"	1"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.005"	-0.0003" to 0.0003"	2"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.005"	-0.0003" to 0.0003"	2"	50	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.006"	-0.0004" to 0.0004"	1/2"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.006"	-0.0004" to 0.0004"	1/2"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.006"	-0.0004" to 0.0004"	2"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.006"	-0.0004" to 0.0004"	2"	50	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.008"	-0.0004" to 0.0004"	1/4"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.008"	-0.0004" to 0.0004"	1/4"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.008"	-0.0004" to 0.0004"	3/8"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.008"	-0.0004" to 0.0004"	3/8"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.008"	-0.0004" to 0.0004"	1/2"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.008"	-0.0004" to 0.0004"	1/2"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.008"	-0.0004" to 0.0004"	3/4"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.008"	-0.0004" to 0.0004"	3/4"	50	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.008"	-0.0004" to 0.0004"	1"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.008"	-0.0004" to 0.0004"	1"	50	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.008"	-0.0004" to 0.0004"	2"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.008"	-0.0004" to 0.0004"	2"	50	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.008"	-0.0004" to 0.0004"	3"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.008"	-0.0004" to 0.0004"	3"	50	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.01"	-0.0007" to 0.0007"	1/8"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.01"	-0.0007" to 0.0007"	1/8"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.01"	-0.0007" to 0.0007"	1/4"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.01"	-0.0007" to 0.0007"	1/4"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.01"	-0.0007" to 0.0007"	1/2"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.01"	-0.0007" to 0.0007"	1/2"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.01"	-0.0007" to 0.0007"	3/4"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.01"	-0.0007" to 0.0007"	3/4"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.01"	-0.0007" to 0.0007"	1"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.01"	-0.0007" to 0.0007"	1"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.01"	-0.0007" to 0.0007"	2"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.01"	-0.0007" to 0.0007"	2"	75	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.01"	-0.0007" to 0.0007"	3"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.01"	-0.0007" to 0.0007"	3"	75	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.01"	-0.0007" to 0.0007"	4"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.01"	-0.0007" to 0.0007"	4"	50	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.01"	-0.0007" to 0.0007"	6"	20	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.01"	-0.0007" to 0.0007"	12"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.012"	-0.001" to 0.001"	1/4"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.012"	-0.001" to 0.001"	1/4"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.012"	-0.001" to 0.001"	3/8"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.012"	-0.001" to 0.001"	3/8"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.012"	-0.001" to 0.001"	1/2"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.012"	-0.001" to 0.001"	1/2"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.012"	-0.001" to 0.001"	1"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.012"	-0.001" to 0.001"	1"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.012"	-0.001" to 0.001"	2"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.012"	-0.001" to 0.001"	4"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.012"	-0.001" to 0.001"	4"	25	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.015"	-0.001" to 0.001"	1/8"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.015"	-0.001" to 0.001"	1/8"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.015"	-0.001" to 0.001"	1/4"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.015"	-0.001" to 0.001"	1/4"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.015"	-0.001" to 0.001"	1/2"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.015"	-0.001" to 0.001"	1/2"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.015"	-0.001" to 0.001"	3/4"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.015"	-0.001" to 0.001"	3/4"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.015"	-0.001" to 0.001"	1"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.015"	-0.001" to 0.001"	1"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.015"	-0.001" to 0.001"	2"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.015"	-0.001" to 0.001"	2"	75	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.015"	-0.001" to 0.001"	3"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.015"	-0.001" to 0.001"	3"	25	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.02"	-0.001" to 0.001"	1/4"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.02"	-0.001" to 0.001"	1/4"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.02"	-0.001" to 0.001"	3/8"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.02"	-0.001" to 0.001"	3/8"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.02"	-0.001" to 0.001"	1/2"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.02"	-0.001" to 0.001"	1/2"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.02"	-0.001" to 0.001"	3/4"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.02"	-0.001" to 0.001"	3/4"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.02"	-0.001" to 0.001"	1"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.02"	-0.001" to 0.001"	1"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.02"	-0.001" to 0.001"	2"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.02"	-0.001" to 0.001"	2"	50	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.02"	-0.001" to 0.001"	3"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.02"	-0.001" to 0.001"	3"	25	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.02"	-0.001" to 0.001"	4"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.02"	-0.001" to 0.001"	4"	25	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.02"	-0.001" to 0.001"	6"	20	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.02"	-0.001" to 0.001"	12"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.025"	-0.001" to 0.001"	1/4"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.025"	-0.001" to 0.001"	1/4"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.025"	-0.001" to 0.001"	1/2"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.025"	-0.001" to 0.001"	1/2"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.025"	-0.001" to 0.001"	5/8"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.025"	-0.001" to 0.001"	5/8"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.025"	-0.001" to 0.001"	3/4"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.025"	-0.001" to 0.001"	3/4"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.025"	-0.001" to 0.001"	1"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.025"	-0.001" to 0.001"	1"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.025"	-0.001" to 0.001"	2"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.025"	-0.001" to 0.001"	2"	25	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.025"	-0.001" to 0.001"	3"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.025"	-0.001" to 0.001"	3"	25	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.025"	-0.001" to 0.001"	4"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.025"	-0.001" to 0.001"	4"	25	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.025"	-0.001" to 0.001"	6"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.025"	-0.001" to 0.001"	12"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.031"	-0.0015" to 0.0015"	1/4"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.031"	-0.0015" to 0.0015"	1/4"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.031"	-0.0015" to 0.0015"	3/8"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.031"	-0.0015" to 0.0015"	3/8"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.031"	-0.0015" to 0.0015"	1/2"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.031"	-0.0015" to 0.0015"	1/2"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.031"	-0.0015" to 0.0015"	3/4"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.031"	-0.0015" to 0.0015"	3/4"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.031"	-0.0015" to 0.0015"	1"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.031"	-0.0015" to 0.0015"	1"	25	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.031"	-0.0015" to 0.0015"	2"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.031"	-0.0015" to 0.0015"	2"	25	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.031"	-0.0015" to 0.0015"	3"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	000000	00000
0.031"	-0.0015" to 0.0015"	3"	25	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.031"	-0.0015" to 0.0015"	4"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	000000	00000
0.031"	-0.0015" to 0.0015"	4"	25	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.031"	-0.0015" to 0.0015"	6"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.031"	-0.0015" to 0.0015"	12"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	00000000	000000

Email Us

About Carbon Steel, Alloy Steel, Spring Steel, and Cast Iron

Wear-Resistant 1095 Spring Steel Sheets and Strips

Easy-to-Form Wear-Resistant 1095 Spring Steel Sheets

Fatigue-Resistant 301 Stainless Steel