The head on these mallets is loaded with metal shot for added weight and a controlled impact with minimal rebound. Use them to drive chisels and strike work without damaging its surface.

Change the faces out when worn rather than replacing the entire tool. A fluorescent orange color makes these mallets easy to see. All have a head loaded with metal shot for added weight and a controlled impact with minimal rebound. Use them to drive chisels and strike work without damaging its surface.

Replace faces when they become worn rather than replacing the entire tool. These mallets are suitable for driving chisels and striking work without damaging its surface.

To suit a range of applications, these sets include hammers in a range of sizes and weights. Use the domed end of the head for forming soft metal, rounding off edges, and closing rivets. The flat striking face is for driving nails, pins, punches, and chisels.

Demolish material, form metal, and drive punches, chisels, and masonry drills.

Change out the faces when they become worn. The head on these hammers is loaded with metal shot for added weight and a controlled impact with minimal rebound. Use them to demolish material, form metal, and drive punches, chisels, and masonry drills.

Strike metal, concrete, and stone with the flat end of these hammers; the wedge-shaped end is for bending and shaping metal. They're also known as cross-peen hammers.

These palm-sized tools fit in tight spaces and use air to deliver a powerful strike where swinging a hammer is not possible. Replace faces when they are worn, or switch to a face with a different material or hardness.

Set solid rivets by hand. These tools are also known as paneing, setting, and seaming hammers.

Also known as upholstery and pin hammers, these tools have a small head for driving tacks and pins in confined areas.

Also known as jeweler's hammers, these have smooth steel faces for precise forming and finishing work on delicate metal workpieces.

Drive these wedges into the handle of your hammer or axe to create a snug fit for the head.

A long handle lets you access hard-to-reach spots.

Use with Air-Powered Needle Scalers/Chiseling Hammers.

The SDS-Max shank has three deep slots and two shallow slots for use with SDS-Max-drive rotary hammers.

The SDS-Plus shank has two deep slots and two shallow slots for use with SDS-Plus-drive rotary hammers.

Use with electric demolition hammers.

Use with electric and air-powered pavement-breaker hammers.

Also known as United States Navy (U.S.N.)-style chisels, these tools have an oval or round collar on the shank.

Change the blows-per-minute by varying the pressure on the speed control.

With no internal springs to break, these tools provide consistent performance.

Small needles gently tap surfaces to remove unwanted rust, scale, paint, and weld spatter.

Kits include a hammer and round rivet setters.

The magnetic tip holds the nail; push the handle to easily drive and countersink the nail. Also known as brad drivers.