A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.

Wider than our standard ball bearings, these rugged bearings are good for handling heavy loads at low speeds.

With a spherical raceway and two rows of balls, these bearings compensate for shaft misalignment.

Internal locking elements (sprags) lock to transmit torque in one direction while turning freely in the other direction.

Mount these bearings onto a hex shaft.

The flange ensures proper positioning inside a tube or housing.

No need to worry about precisely aligning these bearings—they swivel to compensate for up to 5° of shaft misalignment.

Quickly secure these bearings onto shafts with the clamp-on collar for a concentric, mar-free hold.

Secure these bearings in washdown areas, such as food, beverage, pharmaceutical, and chemical plants, by tightening the set screw onto a shaft—no additional collar needed.

Designed to stand up to frequent washdowns, you can quickly secure these ball bearings onto shafts with the clamp-on collar in food, beverage, pharmaceutical, and chemical plants. The collar centers your shafts and secures them better than set screw ball bearings, which reduces vibration and noise.

In addition to handling higher loads than three-piece ball bearings, one-piece bearings are easier to handle. They have an outer band that holds the bearing together and acts as a shield against dust and other contaminants.

These bearings have twice as many contact points as angular-contact ball bearings.

An ABEC-7 rating means these bearings are made to some of the tightest tolerances, so they operate at the highest speeds.

For a more compact machine, these bearings have thinner inner and outer rings than high-load crossed-roller bearings. Route hydraulic lines, electrical wiring, and other components through the inside of the bearing.

With thinner inner and outer rings, these bearings keep your machines more compact than high-load crossed-roller bearings. Route hydraulic lines, electrical wiring, and other components through the inside of the bearing. Mounting holes on the rings allow for fastening onto hollow joints and shafts.

A built-in thrust ball bearing reduces wear from adjacent shaft components, while the needle-roller bearing supports radial loads.

Double rows of tapered bearings support large shafts with heavy loads.

The needles in these bearings roll freely in one direction, but lock to transmit torque when the rotation of the shaft is reversed. Also known as drawn-cup roller clutches.

With cylindrical rollers to distribute load over a large surface area, these bearings are often used to support heavy loads at high speeds in applications such as power generation and metal recycling.

Thick, tapered rollers stand up to extremely high thrust loads.

Designed with a thin, compact housing, these bearings are good for space-constrained applications.

Keep shafts, such as those with a shoulder, clear of the mounting surface. These bearings have a higher mounting base that gives them more space to the mounting surface than standard mounting bases.

Synthetic grease or graphite enables these bearings to operate in high temperatures.

Meeting IP69K for washdown environments, these mounted ball bearings are used in food, beverage, pharmaceutical, and chemical plants.

These bearings are rated IP69K as able to withstand washdown environments such as food, pharmaceutical, and chemical plants. Their fluoropolymer-coated housing is as corrosion resistant as 304 steel and safe for contact with food.

A split housing means you can remove the top half of these bearings to inspect or repair shafts and components. This reduces downtime and minimizes the risk of damaging surrounding components.

Designed with a thin, compact housing, these bearings are good for space-constrained applications.

An elongated mounting hole on one side of the flange lets you adjust the position of these bearings without having to remove your shaft.

Used in food, beverage, pharmaceutical, and chemical plants, these mounted ball bearings are IP69K certified for washdown environments and have a two-bolt flange for mounting.

These roller bearings handle extremely high speeds for their small size.

Made to withstand frequent washdowns, these bearings are permanently lubricated, which means you’ll never have to add lubricant. Use them in hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants.

These bearings have the highest speed ratings of any mounted ball bearing in our offering.

With a four-bolt flange for mounting and an IP69K certification approving them for washdown environments, these mounted ball bearings are used in food, beverage, pharmaceutical, and chemical plants.

The diameter on these balls is held to a precise tolerance.

These balls are hardened for increased wear and abrasion resistance.

440A stainless steel resists damage from impact and abrasion. It's often used for cutlery and valve components.

This material has tighter tolerances than standard 304 stainless steel.

These ball transfers have capacities up to 2,200 lbs.

These heavy duty ball transfers recess into the mounting surface for a low profile.

Drop-in design makes for easy installation.

The ball in these transfers is spring-loaded to absorb impact.

These ball transfers have capacities up to 2,400 lbs.

These ball transfers and stops rise when you supply air and retract into the housing when air supply ceases.

Use these bearings to replace worn and damaged bearings or press-fit them into tubing or pipe to create a roller. All have a hex-shaped axle.

Choose ball bearings for debris-free environments and when speed is a necessity. They operate with less friction than sleeve bearings, so you can run them at higher speeds.

Outdoor as well as mild chemical environments are no problem for these bearings. They have stainless steel balls for corrosion resistance.

Designed to handle heavy loads, these bearings have higher load capacities than comparable standard mounted linear ball bearings for support rail shafts.

Use ball bearings in debris-free environments and when speed is a necessity. They operate with less friction than sleeve bearings, so you can run them at higher speeds.

The choice for low-friction motion in high-temperature environments.

Ball bearings create less friction than sleeve bearings, so they require less force to operate.

The choice for low-friction motion in high-temperature environments.

Thread the stud directly into a component or secure with a nut for through-hole mounting.

These rollers are rated to handle radial and thrust (top and side) loads simultaneously.

These rollers are rated to handle radial and thrust (top and side) loads simultaneously.

A dual-flange design provides guidance on both sides and helps these rollers stay on track.

Designed specifically for use on horizontal surfaces, the contact angle of the ball bearings on the rail allows these carriages to last longer than other carriages.

Designed for use on horizontal surfaces, the contact angle of the ball bearings on the rail allows these carriages to last longer than other carriages.

Run many cycles in tight spaces before replacing or re-greasing carriages.

With a wide base and low-profile design, these carriages and guide rails stabilize moment (twisting) and off-center loads better than other carriages and rails. They're good for use in areas where multiple carriages or rails won't fit.

For smooth, accurate movement around curves and loops, these carriages have ball bearings that work well in high-speed, high-load applications.

V-shaped rollers and rails allow these carriages to operate well in dirty environments because the debris won't get trapped on the rail.

Use these carriages and guide rails for light loads where precise movement is not required.

Create your own positioning table or telescoping slide. Sets include four rails, two roller bearing cages, and eight end stops.

A thumb screw locks the slide to prevent movement in systems where vibration is present.

A micrometer handle ensures accurate, repeatable positioning along a single axis—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.

A set of ball bearings reduces friction and secures the end of a metric ball or lead screw.

Multiple thread channels (also known as thread starts) create faster linear travel than ball screws with a single thread start.

Also known as single-start ball screws and nuts, these have a single thread that runs the length of the screw. They operate with more torque than fast-travel ball screws and nuts.

Precision ground to create more points of contact, these roller screws and nuts are highly accurate and handle much higher loads than ball screws and nuts of the same size.

When you don't have enough clearance for side-mount or under-the-counter slides, mount these to the base of your drawer.

A stop holds the drawer closed; pull firmly on the drawer to open.

The stacked design provides stability for deep and wide drawers.

Access the very back of drawers, even if there’s an overhang from the drawer or countertop above. When fully extended, these slides position your drawer a full inch beyond your cabinet's edge.

Where vibration or movement could force your drawer open, these slides have a spring that pulls and holds it shut. As your drawer approaches the closed position, the spring finishes the job.

Open drawers from either side of a cart or cabinet—these slides let drawers pass through for two-way access to contents.

A stop holds your drawer open for secure, sustained access to its contents. Push firmly on the drawer to close.

Before drawers can slam shut, a damper and spring on these slides catch your drawer and gently guide it closed. This mechanism protects the drawer, its contents, and cabinets from damage caused by harsh slams.

Slides only extend 3/4 of the closed length to reduce the chance that a heavy load will tip your cabinet.