Mixer Nozzles for Two-Part Adhesive Cartridges
To simultaneously mix and dispense two-part adhesives, attach these mixer nozzles to a dual cartridge. Mixing elements help combine the two parts of an adhesive as it flows through the nozzle. A short nozzle with many mixing elements combines adhesive while minimizing the adhesive left in the nozzle after dispensing. Choose a nozzle that matches the connection type, size, and mix ratio of your adhesive cartridge.
A taper tip has a small opening for controlled dispensing.
A step tip allows you to trim the opening to the diameter you need.
A blunt tip dispenses more adhesive at a time than other nozzles.
Use a luer lock tip with a needle (sold separately) for the most precise dispensing.
| For Cartridge Size, oz. | Mix Ratio | Opening ID | Lg. | Mixing Elements | Mfr. | Material | Each | |
Taper Tip | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1.42, 1.69 | 1:1, 2:1, 4:1, 10:1 | 0.07" | 5.9" | 20 | __ | Polypropylene Plastic | 00000000 | 00000 |
| 1.69 | 1:1, 2:1, 4:1, 10:1 | 0.07" | 3.4" | 16 | __ | Polypropylene Plastic | 00000000 | 0000 |
| 1.69 | 1:1, 2:1, 4:1, 10:1 | 0.07" | 3.9" | 12 | __ | Polypropylene Plastic | 00000000 | 0000 |
3-Step Tip | ||||||||
| 1.69 | 1:1, 2:1 | 0.21" | 3.3" | 16 | Loctite® | Polypropylene Plastic | 000000000 | 0000 |
4-Step Tip | ||||||||
| 1.69 | 1:1, 2:1, 4:1 | 0.059"-0.188" | 6" | 21 | Loctite® | Polypropylene Plastic | 00000000 | 0000 |
| 1.69 | 1:1, 2:1, 4:1, 10:1 | 0.05"-0.07" | 5.3" | 21 | __ | Polypropylene Plastic | 00000000 | 0000 |
5-Step Tip | ||||||||
| 1.69 | 1:1, 2:1, 4:1, 10:1 | 0.05"-0.07" | 5.9" | 20 | __ | Polypropylene Plastic | 00000000 | 0000 |
Blunt Tip | ||||||||
| 1.69 | 1:1, 2:1, 4:1, 10:1 | 0.19" | 3.3" | 12 | __ | Polypropylene Plastic | 00000000 | 0000 |
| 1.69 | 1:1, 2:1, 4:1, 10:1 | 0.19" | 5.3" | 20 | __ | Polypropylene Plastic | 00000000 | 0000 |
Luer Lock Tip | ||||||||
| 1.69 | 1:1, 2:1, 4:1, 10:1 | 0.07" | 4.1" | 20 | __ | Polypropylene Plastic | 00000000 | 0000 |
| 1.69 | 1:1, 2:1, 4:1, 10:1 | 0.07" | 5.9" | 20 | __ | Polypropylene Plastic | 00000000 | 0000 |
Luer Slip Tip | ||||||||
| 1.69 | 1:1, 2:1, 4:1 | 0.063" | 6" | 20 | Loctite® | Polypropylene Plastic | 0000000 | 0000 |
Combination Tip | ||||||||
| 1.69 | 1:1, 2:1, 4:1 | 0.066" | 4.5" | 24 | Loctite® | Polypropylene Plastic | 0000000 | 0000 |
| For Cartridge Size, oz. | Mix Ratio | Opening ID | Lg. | Mixing Elements | Mfr. | Material | Pkg. Qty. | Pkg. | |
Taper Tip | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1.42, 1.69 | 1:1, 2:1, 4:1, 10:1 | 0.07" | 5.9" | 20 | __ | Polypropylene Plastic | 12 | 000000000 | 000000 |
| 1.69 | 1:1, 2:1, 4:1, 10:1 | 0.07" | 3.4" | 16 | __ | Polypropylene Plastic | 12 | 000000000 | 00000 |
| 1.69 | 1:1, 2:1, 4:1, 10:1 | 0.07" | 3.9" | 12 | __ | Polypropylene Plastic | 12 | 000000000 | 00000 |
| 1.69 | 1:1, 2:1, 4:1, 10:1 | 0.07" | 4.1" | 20 | __ | Polypropylene Plastic | 10 | 000000000 | 00000 |
3-Step Tip | |||||||||
| 1.69 | 1:1, 2:1 | 0.21" | 3.3" | 16 | Loctite® | Polypropylene Plastic | 10 | 000000000 | 00000 |
4-Step Tip | |||||||||
| 1.69 | 1:1, 2:1, 4:1 | 0.059"-0.188" | 6" | 21 | Loctite® | Polypropylene Plastic | 10 | 0000000 | 00000 |
Blunt Tip | |||||||||
| 1.69 | 1:1, 2:1, 4:1, 10:1 | 0.19" | 3.3" | 12 | __ | Polypropylene Plastic | 12 | 000000000 | 00000 |
Luer Lock Tip | |||||||||
| 1.69 | 1:1, 2:1, 4:1, 10:1 | 0.07" | 4.1" | 20 | __ | Polypropylene Plastic | 10 | 000000000 | 00000 |
| 1.69 | 1:1, 2:1, 4:1, 10:1 | 0.07" | 5.9" | 20 | __ | Polypropylene Plastic | 10 | 000000000 | 00000 |
Luer Slip Tip | |||||||||
| 1.69 | 1:1, 2:1, 4:1 | 0.063" | 6" | 20 | Loctite® | Polypropylene Plastic | 10 | 00000000 | 00000 |
Combination Tip | |||||||||
| 1.69 | 1:1, 2:1, 4:1 | 0.066" | 4.5" | 24 | Loctite® | Polypropylene Plastic | 10 | 00000000 | 00000 |
| For Cartridge Size, oz. | Mix Ratio | Opening ID | Lg. | Mixing Elements | Mfr. | Material | Each | |
3-Step Tip | ||||||||
|---|---|---|---|---|---|---|---|---|
| 6.76, 13.5 | 1:1, 2:1 | 0.11"-0.13" | 6.3" | 24 | __ | Polypropylene Plastic | 00000000 | 00000 |
| 6.76, 13.5 | 1:1, 2:1 | 0.12"-0.37" | 7.3" | 18 | __ | Polypropylene Plastic | 0000000 | 0000 |
| 6.76, 13.5 | 1:1, 2:1 | 0.12"-0.37" | 9.2" | 24 | __ | Polypropylene Plastic | 0000000 | 0000 |
5-Step Tip | ||||||||
| 6.76, 13.5 | 1:1, 2:1 | 0.07"-0.21" | 7.3" | 20 | 3M | Polypropylene Plastic | 0000000 | 0000 |
| 6.76, 13.5 | 1:1, 2:1 | 0.118"-0.35" | 8.4" | 18 | __ | Polypropylene Plastic | 0000000 | 0000 |
| 6.76, 13.5 | 1:1, 2:1 | 0.157"-0.45" | 11.5" | 24 | __ | Polypropylene Plastic | 0000000 | 0000 |
| 6.76, 13.5 | 1:1, 2:1 | 0.66" | 5" | 20 | 3M | Polypropylene Plastic | 00000000 | 0000 |
Combination Tip | ||||||||
| 6.76, 13.52 | 1:1, 2:1, 4:1 | 0.066" | 5" | 24 | Loctite® | Polypropylene Plastic | 0000000 | 0000 |
| For Cartridge Size, oz. | Mix Ratio | Opening ID | Lg. | Mixing Elements | Mfr. | Material | Pkg. Qty. | Pkg. | |
Combination Tip | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 6.76, 13.52 | 1:1, 2:1, 4:1 | 0.066" | 5" | 24 | Loctite® | Polypropylene Plastic | 10 | 0000000 | 000000 |
| For Cartridge Size, oz. | Mix Ratio | Opening ID | Lg. | Mixing Elements | Mfr. | Material | Each | |
Taper Tip | ||||||||
|---|---|---|---|---|---|---|---|---|
| 6.76, 13.52 | 1:1, 2:1 | 0.07" | 5.2" | 24 | Loctite® | Polypropylene Plastic | 0000000 | 00000 |
4-Step Tip | ||||||||
| 6.76, 13.52 | 1:1, 2:1 | 0.07" | 7.6" | 24 | Loctite® | Polypropylene Plastic | 000000000 | 0000 |
| 7.8 | 10:1 | 0.394" | 8.7" | 18 | SciGrip | Polypropylene Plastic | 000000000 | 0000 |
5-Step Tip | ||||||||
| 16.57 | 10:1 | 0.094"-0.235" | 9.1" | 24 | Loctite® | Polyethylene Plastic | 0000000 | 0000 |
| For Cartridge Size, oz. | Mix Ratio | Opening ID | Lg. | Mixing Elements | Mfr. | Material | Pkg. Qty. | Pkg. | |
Taper Tip | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 6.76, 13.52 | 1:1, 2:1 | 0.07" | 5.2" | 24 | Loctite® | Polypropylene Plastic | 10 | 0000000 | 000000 |
4-Step Tip | |||||||||
| 6.76, 13.52 | 1:1, 2:1 | 0.07" | 7.6" | 24 | Loctite® | Polypropylene Plastic | 10 | 000000000 | 00000 |
5-Step Tip | |||||||||
| 16.57 | 10:1 | 0.094"-0.235" | 9.1" | 24 | Loctite® | Polyethylene Plastic | 10 | 0000000 | 00000 |
| For Cartridge Size, oz. | Mix Ratio | Opening ID | Lg. | Mixing Elements | Mfr. | Material | Each | |
Taper Tip | ||||||||
|---|---|---|---|---|---|---|---|---|
| 0.34 | 1:1 | 0.039" | 2.9" | 16 | __ | Polypropylene Plastic | 0000000 | 00000 |
| 1.52 | 10:1 | 0.08" | 3.6" | 16 | 3M | Polypropylene Plastic | 0000000 | 0000 |
| 1.64, 1.69 | 1:1, 2:1, 2:3 | 0.08" | 3.6" | 16 | 3M | Polypropylene Plastic | 0000000 | 0000 |
| 1.69 | 1:1, 2:1 | 0.039" | 3" | 16 | Loctite® | Polypropylene Plastic | 0000000 | 0000 |
| 1.69 | 1:1, 2:1 | 0.07" | 3.6" | 16 | Loctite® | Polypropylene Plastic | 0000000 | 0000 |
| 1.69 | 1:1, 2:1 | 0.13" | 4.8" | 16 | Loctite® | Polypropylene Plastic | 000000000 | 0000 |
| 1.69 | 4:1, 10:1 | 0.07" | 4.8" | 24 | Loctite® | Polypropylene Plastic | 0000000 | 0000 |
| 1.69 | 4:1, 10:1 | 0.1" | 2.4" | 16 | Loctite® | Polypropylene Plastic | 000000000 | 0000 |
3-Step Tip | ||||||||
| 0.4 | 100:85 | 0.1" | 2.4" | 16 | Loctite® | Polypropylene Plastic | 000000000 | 0000 |
4-Step Tip | ||||||||
| 1.64, 1.69 | 1:1, 2:1 | 0.04"-0.193" | 5.8" | 20 | 3M | Polypropylene Plastic | 0000000 | 0000 |
5-Step Tip | ||||||||
| 1.69 | 1:1, 2:1 | 0.26" | 6.2" | 20 | __ | Polypropylene Plastic | 00000000 | 0000 |
| 1.69 | 1:1, 2:1 | 0.06"-0.26" | 6.2" | 20 | Loctite® | Polypropylene Plastic | 00000000 | 0000 |
| 1.69 | 10:1 | 0.06"-0.26" | 6.2" | 20 | Loctite® | Polypropylene Plastic | 00000000 | 0000 |
| For Cartridge Size, oz. | Mix Ratio | Opening ID | Lg. | Mixing Elements | Mfr. | Material | Pkg. Qty. | Pkg. | |
Taper Tip | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1.69 | 1:1, 2:1 | 0.039" | 3" | 16 | Loctite® | Polypropylene Plastic | 10 | 0000000 | 000000 |
| 1.69 | 1:1, 2:1 | 0.07" | 3.6" | 16 | Loctite® | Polypropylene Plastic | 10 | 0000000 | 00000 |
| 1.69 | 1:1, 2:1 | 0.13" | 4.8" | 16 | Loctite® | Polypropylene Plastic | 10 | 000000000 | 00000 |
| 1.69 | 4:1, 10:1 | 0.07" | 4.8" | 24 | Loctite® | Polypropylene Plastic | 10 | 0000000 | 00000 |
| 1.69 | 4:1, 10:1 | 0.1" | 2.4" | 16 | Loctite® | Polypropylene Plastic | 5 | 000000000 | 0000 |
3-Step Tip | |||||||||
| 0.4 | 100:85 | 0.1" | 2.4" | 16 | Loctite® | Polypropylene Plastic | 10 | 000000000 | 0000 |
5-Step Tip | |||||||||
| 1.69 | 1:1, 2:1 | 0.26" | 6.2" | 20 | __ | Polypropylene Plastic | 12 | 000000000 | 00000 |
Stainless Steel Inline Pipe Mixers
Use for pH control and chlorination. These mixers are more chemical resistant than nylon mixers. Also known as static mixers, they install in your pipeline and mix liquid as it passes over fixed spiral blades. They have no moving parts and require no external power source.
Number of Blades—Follow these steps to determine your Reynolds number, which indicates if you need a mixer with 6 or 12 blades.
1. Multiply flow rate (gpm) by 3,157
2. Multiply specific gravity by total of Step 1
3. Multiply viscosity (cp) by pipe ID (inches)
4. Divide total of Step 2 by total of Step 3
For technical drawings and 3-D models, click on a part number.
| Pipe Size | Thread Type | Gender | Lg. | For Use With | Each | |
6 Blades—Reynolds Number 1,000 and Above | ||||||
|---|---|---|---|---|---|---|
| 1/4 | NPT | Male | 3" | Oil, Wastewater | 0000000 | 0000000 |
| 3/8 | NPT | Male | 4" | Oil, Wastewater | 0000000 | 000000 |
| 1/2 | NPT | Male | 5" | Oil, Wastewater | 0000000 | 000000 |
| 3/4 | NPT | Male | 7" | Oil, Wastewater | 0000000 | 000000 |
| 1 | NPT | Male | 9" | Oil, Wastewater | 0000000 | 000000 |
| 1 1/2 | NPT | Male | 13" | Oil, Wastewater | 0000000 | 000000 |
| 2 | NPT | Male | 17" | Oil, Wastewater | 0000000 | 000000 |
12 Blades—Reynolds Number 500-1,000 | ||||||
| 1/4 | NPT | Male | 6" | Oil, Wastewater | 0000000 | 000000 |
| 3/8 | NPT | Male | 8" | Oil, Wastewater | 0000000 | 000000 |
| 1/2 | NPT | Male | 10" | Oil, Wastewater | 0000000 | 000000 |
| 3/4 | NPT | Male | 13" | Oil, Wastewater | 0000000 | 000000 |
| 1 | NPT | Male | 17" | Oil, Wastewater | 0000000 | 000000 |
| 1 1/2 | NPT | Male | 26" | Oil, Wastewater | 0000000 | 000000 |
| 2 | NPT | Male | 33" | Oil, Wastewater | 0000000 | 00000000 |
PVC Inline Pipe Mixers
Use for pH control and chlorination. These mixers are more chemical resistant than nylon mixers. Also known as static mixers, they install in your pipeline and mix liquid as it passes over fixed spiral blades. They have no moving parts and require no external power source.
Number of Blades—Follow these steps to determine your Reynolds number, which indicates if you need a mixer with 6 or 12 blades.
1. Multiply flow rate (gpm) by 3,157
2. Multiply specific gravity by total of Step 1
3. Multiply viscosity (cp) by pipe ID (inches)
4. Divide total of Step 2 by total of Step 3
For technical drawings and 3-D models, click on a part number.
| Pipe Size | Thread Type | Gender | Lg. | For Use With | Each | |
6 Blades—Reynolds Number 1,000 and Above | ||||||
|---|---|---|---|---|---|---|
| 3/8 | NPT | Male | 6 1/2" | Chlorine, Water | 00000000 | 0000000 |
| 1/2 | NPT | Male | 7" | Chlorine, Water | 00000000 | 000000 |
| 3/4 | NPT | Male | 9" | Chlorine, Water | 00000000 | 000000 |
| 1 | NPT | Male | 11" | Chlorine, Water | 00000000 | 000000 |
| 1 1/4 | NPT | Male | 14" | Chlorine, Water | 00000000 | 000000 |
| 1 1/2 | NPT | Male | 15" | Chlorine, Water | 00000000 | 000000 |
| 2 | NPT | Male | 19" | Chlorine, Water | 00000000 | 000000 |
12 Blades—Reynolds Number 500-1,000 | ||||||
| 3/8 | NPT | Male | 11" | Chlorine, Water | 00000000 | 000000 |
| 1/2 | NPT | Male | 12" | Chlorine, Water | 00000000 | 000000 |
| 3/4 | NPT | Male | 15" | Chlorine, Water | 00000000 | 000000 |
| 1 | NPT | Male | 18" | Chlorine, Water | 00000000 | 000000 |
| 1 1/4 | NPT | Male | 25" | Chlorine, Water | 00000000 | 000000 |
| 1 1/2 | NPT | Male | 28" | Chlorine, Water | 00000000 | 000000 |
| 2 | NPT | Male | 35" | Chlorine, Water | 00000000 | 000000 |
Plastic Inline Pipe Mixers
Mix solvents and water-based liquids. Also known as static mixers, these install in your pipeline and mix liquid as it passes over fixed spiral blades. They have no moving parts and require no external power source. The body is semi-clear for monitoring the condition of the mixer.
Number of Blades—Follow these steps to determine your Reynolds number, which indicates if you need a mixer with 12 or 18 blades.
1. Multiply flow rate (gpm) by 3,157
2. Multiply specific gravity by total of Step 1
3. Multiply viscosity (cp) by pipe ID (inches)
4. Divide total of Step 2 by total of Step 3
For technical drawings and 3-D models, click on a part number.
| Pipe Size | Thread Type | Gender | Lg. | Blade Material | Body Material | Fitting Material | For Use With | Each | |
12 Blades—Reynolds Number 500 and Above | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 3/8 | NPT | Male | 10" | Acetal Plastic | Polypropylene Plastic | Brass | Solvent, Water-Based Liquid | 0000000 | 000000 |
12 Blades—Reynolds Number 500-1,000 | |||||||||
| 1/4 | NPT | Male | 8 1/2" | Acetal Plastic | Polypropylene Plastic | Brass | Solvent, Water-Based Liquid | 0000000 | 00000 |
18 Blades—Reynolds Number 10-500 | |||||||||
| 3/8 | NPT | Male | 11 1/8" | Acetal Plastic | Nylon Plastic | Brass | Solvent, Water-Based Liquid | 0000000 | 00000 |
Inline Tube Mixers
These mixers have unthreaded ends that can be secured with compression or push-to-connect fittings. Materials mix as they pass over the fixed spiral blades. They require no external power source.
For technical drawings and 3-D models, click on a part number.
Tube | ||||||||
|---|---|---|---|---|---|---|---|---|
| OD | ID | Lg. | Blade Material | Body Material | Max. Temperature, °F | For Use With | Each | |
21 Blades | ||||||||
| 0.188" | 0.132" | 6" | 316 Stainless Steel | 316 Stainless Steel | 300° | Oil, Solvent, Wastewater, Water-Based Liquid | 0000000 | 0000000 |
| 0.375" | 0.319" | 11" | 316 Stainless Steel | 316 Stainless Steel | 300° | Oil, Solvent, Wastewater, Water-Based Liquid | 0000000 | 000000 |
| 0.500" | 0.430" | 16 3/8" | 316 Stainless Steel | 316 Stainless Steel | 300° | Oil, Solvent, Wastewater, Water-Based Liquid | 0000000 | 000000 |
32 Blades | ||||||||
| 0.375" | 0.319" | 17" | 316 Stainless Steel | 316 Stainless Steel | 300° | Oil, Solvent, Wastewater, Water-Based Liquid | 0000000 | 000000 |
| 0.500" | 0.430" | 24 3/4" | 316 Stainless Steel | 316 Stainless Steel | 300° | Oil, Solvent, Wastewater, Water-Based Liquid | 0000000 | 000000 |
34 Blades | ||||||||
| 0.250" | 0.194" | 11 1/2" | 316 Stainless Steel | 316 Stainless Steel | 300° | Oil, Solvent, Wastewater, Water-Based Liquid | 0000000 | 000000 |
Sanitary Inline Tube Mixers
Mix products as they pass through your line in sanitary environments such as food, beverage, and pharmaceutical plants. Also known as static mixers, these mixers have helical-shaped blades for blending high-viscosity products such as ice cream, fruit yogurt, and juice concentrate. Remove the blades for thorough cleaning or to clear a jam. Mixers are made of stainless steel to resist corrosion and are highly polished on the interior, leaving no room for product buildup or bacterial growth. They connect with quick-clamp sanitary tube fittings, letting you easily access your line or extend it with multiple mixers. All meet ASME bioprocessing standards for sanitary environments.
For a light dispersion or preliminary mix of fluids, you don't need as many mixers as the following calculations would indicate. A single 6-element mixer will be sufficient in applications such as mixing upstream of a homogenizer or agitator, mixing chocolate chips into ice cream, or intentional swirling or color banding of different ingredients.
You may need to install multiple mixers in a series if you are looking for a perfectly homogenous blend of fluids. Follow these steps to determine your Reynolds Number. Use one mixer if your Reynolds Number is above 1,500; additional mixers are required if your Reynolds Number is below 1,500.
1. Multiply flow rate (gpm) by 3,157
2. Multiply specific gravity by total of Step 1
3. Multiply viscosity (cp) by tube ID (inches)
4. Divide total of Step 2 by total of Step 3
For technical drawings and 3-D models, click on a part number.
Tube | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| OD | ID | Length | Blade Material | Body Material | Interior Smoothness, Ra | For Use With | Specifications Met | Each | |
6 Blades—Reynolds Number 1,500 and Above | |||||||||
| 1/2" | 0.37" | 5 1/2" | 316 Stainless Steel | 316 Stainless Steel | 20 | Beverage, Dairy, Food | ASME BPE | 0000000 | 000000000 |
| 3/4" | 0.62" | 7" | 316 Stainless Steel | 316 Stainless Steel | 20 | Beverage, Dairy, Food | ASME BPE | 0000000 | 00000000 |
| 1" | 0.87" | 9" | 316 Stainless Steel | 316 Stainless Steel | 20 | Beverage, Dairy, Food | ASME BPE | 0000000 | 00000000 |
| 1 1/2" | 1.37" | 14" | 316 Stainless Steel | 316 Stainless Steel | 20 | Beverage, Dairy, Food | ASME BPE | 0000000 | 00000000 |
| 2" | 1.87" | 18" | 316 Stainless Steel | 316 Stainless Steel | 20 | Beverage, Dairy, Food | ASME BPE | 0000000 | 00000000 |
| 2 1/2" | 2.37" | 22" | 316 Stainless Steel | 316 Stainless Steel | 20 | Beverage, Dairy, Food | ASME BPE | 0000000 | 00000000 |
| 3" | 2.87" | 27" | 316 Stainless Steel | 316 Stainless Steel | 20 | Beverage, Dairy, Food | ASME BPE | 0000000 | 00000000 |
| 4" | 3.83" | 36" | 316 Stainless Steel | 316 Stainless Steel | 20 | Beverage, Dairy, Food | ASME BPE | 0000000 | 00000000 |
Tank Mixing Nozzles
Circulate tank contents by pumping liquid through these nozzles. For every gallon of liquid that flows through the inlet, suction draws in and mixes about four gallons from the tank. Nozzles should be positioned close to the bottom of your tank.
| Orifice Dia. | Pipe Size | Thread Type | Gender | Inlet Flow Rate | Tank Circulation Rate | Dia. | Lg. | Max. Pressure | Max. Temperature, °F | Material | Color | Each | |
| 0.06" | 1/4 | NPT | Male | 0.7 gpm @ 50 psi | 4.4 gpm @ 50 psi | 11/16" | 1 5/8" | 50 psi @ 70° F | 200° | Polypropylene Plastic | Orange | 0000000 | 000000 |
| 0.08" | 1/4 | NPT | Male | 1.2 gpm @ 50 psi | 6 gpm @ 50 psi | 11/16" | 1 5/8" | 50 psi @ 70° F | 200° | Polypropylene Plastic | Green | 0000000 | 00000 |
| 0.1" | 1/4 | NPT | Male | 2 gpm @ 50 psi | 7.8 gpm @ 50 psi | 11/16" | 1 5/8" | 50 psi @ 70° F | 200° | Polypropylene Plastic | Blue | 0000000 | 00000 |
| 0.12" | 1/4 | NPT | Male | 2.9 gpm @ 50 psi | 10.7 gpm @ 50 psi | 11/16" | 1 5/8" | 50 psi @ 70° F | 200° | Polypropylene Plastic | White | 0000000 | 00000 |
| 3/16" | 1/4 | NPT | Male | 7.8 gpm @ 50 psi | 36.8 gpm @ 50 psi | 1 1/4" | 3" | 50 psi @ 70° F | 200° | Polypropylene Plastic | Black | 0000000 | 00000 |
| 5/16" | 3/8 | NPT | Male | 20 gpm @ 50 psi | 100 gpm @ 50 psi | 1 11/16" | 4 1/16" | 50 psi @ 70° F | 200° | Polypropylene Plastic | Black | 0000000 | 00000 |
| 3/8" | 3/4 | NPT | Male | 30 gpm @ 50 psi | 150 gpm @ 50 psi | 3" | 6 3/8" | 50 psi @ 70° F | 200° | Polypropylene Plastic | Black | 0000000 | 00000 |
| 9/16" | 1 1/2 | NPT | Male | 75 gpm @ 50 psi | 375 gpm @ 50 psi | 4 1/2" | 10" | 50 psi @ 70° F | 200° | Polypropylene Plastic | Black | 0000000 | 000000 |