Push the plunger to pump water, cleaners, and chemicals.

These pumps have a selectable flow rate, so you can adjust flow for different dispensing applications. A lever handle maximizes output with each stroke for low-effort dispensing.

Designed to move low volumes of caustic liquids in confined areas, these pumps have a thin intake tube and a small handle.

Eliminate leaks and waste with a faucet-style nondrip nozzle that quickly starts and stops flow.

Made with PTFE components, these pumps stand up to aggressive chemicals our other drum pumps can't, such as hydrochloric acid, bleach, sodium hydroxide, and methyl ethyl ketone.

Rotate the handle to dispense a continuous flow of liquid.

A lever handle delivers fluid on both the forward and backward strokes for faster dispensing than other drum pumps.

A nozzle and hose allow you to dispense directly into your container. The lever handle maximizes output with each stroke for low-effort dispensing. The handle delivers fluid on both the forward and backward strokes to quickly move drum contents.

Eliminate leaks and waste with a faucet-style nondrip nozzle that quickly starts and stops flow.

Use these pumps to move lubricating oil, such as hydraulic and motor oil.

Rotate the handle to dispense a continuous flow of liquid.

Attach these pumps to any 12-volt battery for on-site diesel fuel dispensing at construction sites, on boats, and in other environments without electrical hookups.

Quickly generate suction with battery power.

These pumps are C-UL listed for use in environments with flammable gases and combustible dust. Operating on a 12-volt battery, use them to transfer and drain fuel such as gasoline, diesel fuel, and kerosene.

Drain and transfer liquid more quickly and easily than hand-operated pumps and siphon pumps.

Designed to move 40 gallons of liquid per minute, these pumps quickly empty drum contents.

For accurate dispensing in extremely low-flow applications, these pumps allow you to adjust flow in 2% increments.

These pumps are rated for fuel such as gasoline, kerosene, and diesel fuel.

For easy cleaning, these pumps have a sanitary quick-clamp discharge connection. They're made of FDA listed materials for use with food, water, and beverage.

Often used with ammonia, etching and cleaning solutions, and other caustics, these pumps have a nonsparking air-powered motor for applications where electricity is unavailable or dangerous.

These pumps have a motor that is rated for IEC Zone 1, Groups IIB and IIA; and IEC Zone 21, Groups IIIC, IIIB, and IIIA hazardous locations with flammable gases and vapors, so they can be used with liquids such as acetone, ethanol, methyl ethyl ketone, xylene, and mineral spirits.

A stainless steel construction allows these pumps to be used with aggressive chemicals such as methyl ethyl ketone and xylene.

These pumps are designed for use in food and beverage applications.

A chemical- and impact-resistant PVDF housing stands up to aggressive chemicals such as methyl ethyl ketone and xylene.

Transfer lubricating oil such as hydraulic and motor oil with these pumps. They handle nearly twice the amount of pressure as other air-powered drum pumps to move high-viscosity liquids.

Made of PVDF components, these pumps resist harsh chemicals such as hydrochloric acid and sulfuric acid. They have a foot pedal for hands-free operation.

Eliminate seal wear and leakage with pumps that use magnets to turn the impeller. They’re often used with electroplating and photographic solutions.

A powerful motor provides twice the flow rate of other extended-life circulation pumps. The motor is totally enclosed fan-cooled (TEFC) for use in dusty, dirty, and damp environments. Magnets turn the impeller to eliminate seal wear and leakage for a long service life. These pumps are often used with electroplating and photographic solutions.

Move water and coolants, such as ethylene glycol, in boiler feed systems, cooling towers, and heat exchangers.

Use less electricity to achieve the same flow rates as other circulation pumps.

Propel liquid higher and farther than standard circulation pumps. They're commonly used with chillers, heat exchangers, and boiler feed systems.

Instead of a fan-cooled motor, these pumps have an integrated motor that's cooled by the liquid being pumped for virtually silent operation and a long service life. Also known as canned motor pumps, they're commonly used in chiller systems and aquariums.

Drain underground tanks and process wastewater with pumps that can be installed up to 20 ft. above your liquid source.

A powerful motor provides twice the flow rate of other self-priming circulation pumps. It is totally enclosed fan-cooled (TEFC) for use in dusty, dirty, and damp environments. Install these pumps up to 20 ft. above your liquid source to drain underground tanks and process wastewater.

The durable motor and impeller can handle dirty coolant and machine lubricants with solids up to 1/4" diameter. These pumps have an intake that can be completely submerged in liquid.

Accommodate performance changes in your system with a three-speed switch that adjusts flow rate. Accommodate performance changes in your system with a three-speed switch that adjusts flow rate. Install these pumps directly in your pipeline for applications such as hot-water circulation and hydronic heating and cooling.

Eliminate seal wear and leakage—these pumps have magnets that turn the impeller for a long service life. Install them directly in your pipeline for applications such as hot-water circulation and hydronic heating and cooling.

A high-horsepower motor handles four times the flow and twice the pressure of other inline circulation pumps. Install these pumps directly in your pipeline for applications such as hot-water circulation and hydronic heating and cooling.

Use when space is limited—these pumps connect to a pipe coming from your tank so you can place the pump in another location.

Self-priming up to 6 ft., these pumps have a stainless steel housing sealed with PTFE to resist chemicals such as ammonia and detergents as well as harsh solvents including methyl ethyl ketone (MEK).

Match your pump’s manufacturer and model number to choose the right replacement impeller.

Pump fuel and flammable liquids, such as isopropyl alcohol and xylene. These pumps have an explosion-proof motor that is rated for environments where hazardous material is present.

Transfer hot oil up to 650° F in demanding applications such as plastic mold injecting and chemical processing.

Rated for continuous use, these pumps are often used to move caustics such as antifreeze and salt water. Mount them in any position, even upside down. Also known as diaphragm pumps, they are typically used for low-flow spraying, draining, and washdown applications.

An aluminum enclosure around the motor provides protection in dusty and dirty environments. Designed to fit into small equipment, these pumps have miniature gears and a subfractional horsepower motor for low-flow applications.

Also known as gear pumps, these produce a smooth flow of liquid for applications such as cooling engines, powering hydraulic equipment, and extracting liquid from holding tanks.

Resistant to chemicals such as ammonia, detergents, and cleaning fluids, these pumps have a Santoprene diaphragm and polypropylene housing. Pumps can be used to move thick sludges and slurries

These pumps have a chemical-resistant polypropylene housing for use in harsh environments.

A neoprene diaphragm resists oil and chemicals such as isopropyl alcohol and deionized water. These pumps have a rugged aluminum housing for moving large volumes of thick sludges and slurries in demanding environments.

These pumps have a PTFE diaphragm compatible with oil, fuel, and chemicals such as mineral spirits, methyl ethyl ketone (MEK), and xylene. They have a rugged aluminum housing for moving large volumes of thick sludges and slurries in demanding environments.

Replace worn or broken parts on your transfer pump.

The fluoroelastomer diaphragm withstands higher temperatures than a neoprene diaphragm and has better resistance to fuel such as gasoline and kerosene. These pumps have large internal pathways and check valves with flaps to accommodate thick sewage, abrasive slurries, and industrial waste with large solids that would damage standard air-powered transfer pumps.

With a 316 stainless steel housing and a fluoroelastomer diaphragm, these pumps resist a variety of harsh acids and alkalies, such as phosphoric acid, nitric acid, and sulfuric acid. They have large internal pathways and check valves with flaps to accommodate thick sewage, abrasive slurries, and industrial waste with large solids that would damage standard air-powered transfer pumps.

These pumps can be grounded to dissipate static electricity and are rated for use with flammable liquids such as gasoline, kerosene, isopropyl alcohol, and mineral spirits.

Made of FDA listed materials for use with food and beverage, these pumps have a sanitary quick-clamp fluid connection for easy cleaning. They are commonly used to move sauces, concentrates, and other thick liquids with solids.

A cast iron housing and steel gears allow these pumps to be used to dispense oil and fuel such as hydraulic oil and diesel fuel. Also known as gear pumps, they produce a smooth flow of liquid for applications such as engine lubrication.

These pumps have a bronze housing and gears for use with water. Also known as gear pumps, they produce a smooth flow of liquid for water delivery.

Use these pumps to move lubricating oil such as hydraulic and motor oil. Also known as flexible impeller pumps, they create a suction force that can draw liquid upward to fill the pump chamber when your liquid source is below the pump.

This pump has a totally enclosed nonventilated (TENV) motor that is cooled by the liquid being pumped. Also known as a flexible impeller pump, it creates a suction force that can draw liquid upward to fill the pump chamber when your liquid source is below the pump.

These pumps have an impact-resistant aluminum housing and handle larger solids than other battery-operated water-removal pumps. Use them to remove water from areas without power.

Use these pumps to remove water with small solids up to 1/4" in diameter. They include a 25-ft. hose with cam-and-groove fittings for quick, secure connections.

An aluminum housing provides excellent impact resistance. Use these pumps to clean up water in flooded areas without a sump pit. Pumps activate when plugged in. You can add a plug-in switch to control when the pump activates.

The switch activates on increasing pressure caused by rising water levels for a long service life. It has a separate cord, so you can replace the switch without replacing the whole pump. Use the handle to carry pumps from job to job.

Move higher volumes of water than with other high-flow water-removal pumps. These pumps activate when plugged in. You can add a plug-in switch to control when the pump activates.

Convenient to keep in your toolkit for on-site cleanup, these pumps attach to your drill for small liquid extraction jobs as well as draining water from clogged sinks and emptying tanks.

Fill the fuel tank with gasoline to remove water at sites without power.

Wheel these pumps to remote areas with no power. They can handle sewage water with thick sludge, silt, and debris up to 2” in diameter.

Submerge these pumps to circulate water in small tanks, cooling baths, fountains, and other low-flow applications.

Protected from impact by a durable epoxy-coated aluminum housing, these pumps can be submerged or connected remotely to a pipe in your line. Use to circulate water in small tanks, cooling baths, fountains, and other low-flow applications.

Magnets turn the impeller so there's no shaft seal to wear out. Submerge these pumps to circulate water in small tanks, cooling baths, fountains, and other low-flow applications.

Also known as deep-well submersible pumps, use these pumps to transfer drinking water from wells and cisterns up to 250 ft. deep.

These pumps circulate solvent-based parts-washing solutions.

Also known as peristaltic pumps and tubing pumps, these maintain a fixed flow rate.

These pumps meter a consistent amount of liquid within ±2% of the maximum flow.

A 316 stainless steel housing provides corrosion resistance for a long life in harsh environments. These pumps meter a consistent amount of liquid within ±2% of the maximum flow.

For high-volume chemical sampling and draining, these pumps have a powerful motor that enables them to move 2,448 gallons of liquid per day.

Inject chemicals into your water supply without using electricity—these pumps install directly in your pipeline and activate when water flows into the pump head.

An adjustment dial with a locking lever allows for easy flow control. Also known as diaphragm metering pumps, these can be used with pressures up to four times higher than standard pumps for chemicals.

Dispense precise amounts of fluid from a syringe. Commonly used in chemical and pharmaceutical research, fiber production, and equipment calibration, these pumps maintain a steady flow rate for accurate filling and measuring.

Equipped with a flowmeter/totalizer, this dispenser displays both the flow rate and the cumulative flow volume of the oil dispensed.

Driven by an air-powered pump, this dispenser comes with an adapter to mount through a bung opening on a drum.

Connect these dispensing stations to your bulk oil container to easily fill hand-held dispensers.

Dispense a fixed amount of oil by pumping the handle.

Ready to connect to your air system, these complete systems include a timer and a reservoir.

With a maximum flow of 0.005 oz. per cycle, these pumps deliver small, precise amounts of oil. Turn the dial to set the cycle interval.

Mount these pumps to your grease container to bulk load guns.

Squeeze the bulb to dispense liquids one drop at a time. These droppers are also known as transfer pipettes.

Transfer measured streams of liquid.

Pipette for hours on end—these ergonomic pipettors maintain even flow with just the push of a button.

Pair these pipettes with a pipette pump to transfer measured streams of liquid.

Fill syringes quickly without the mess—these tanks use compressed air to push viscous liquid into a syringe. They hold up to a gallon of material, so you can fill many syringes one after another.

Good for speedy, routine dispensing jobs, these pipettors use air displacement to dispense the same volume every time.

Dispense a sample many times without refilling your pipettor. These tips are designed for use with repeat dispensing pipettors.

Dispense a sample many times without refilling your pipettor. No need to autoclave these tips before first use—they’re cleaned and bagged to prevent contamination.

Fill eight or more reservoirs with the same, precise amount of liquid in one go. Using air displacement, each channel on these pipettors draws or dispenses a set volume when you press the plunger.

Save time dispensing the same amount. Compared to fixed-volume pipettors, these pipettors let you dispense up to 49 samples on a single draw.

Switch between transferring liquids, mixing samples, and separating mixtures with the touch of a button. Compared to manual pipettors, these pipettors dispense using a motor to improve accuracy and reduce fatigue.