Standard Partially Threaded Socket Cap Screws

Filter by

Threading

System of Measurement

Thread Size

Length

Fastener Head Type

Material

Finish

Socket Head Profile

Drive Style

Head Diameter

Thread Pitch

Head Height

Thread Type

Drive Size

Thread Direction

Fastener Strength Grade/Class

Thread Spacing

Tensile Strength

Specifications Met

Thread Fit

DFARS Compliance

REACH Compliance

RoHS Compliance

Forward

How can we improve?

3,216 Products

About Socket Head Screws

Alloy Steel Socket Head Screws

The standard for high-strength fastening.

Mil. Spec. Alloy Steel Socket Head Screws

Choose these screws for their adherence to strict military standards for material and construction.

Torx Alloy Steel Socket Head Screws

A Torx-Plus drive has more points of contact than a hex drive, allowing you to tighten these screws with less slippage or damage to the recess.

Left-Hand Threaded Alloy Steel Socket Head Screws

Tighten these screws by turning them to the left; once fastened, they prevent counterclockwise-moving parts from loosening.

18-8 Stainless Steel Socket Head Screws

Use these general purpose 18-8 stainless steel screws for a variety of fastening applications. They have good chemical resistance.

Mil. Spec. 18-8 Stainless Steel Socket Head Screws

Choose these screws for their adherence to strict military standards for material and construction. Screws are 18-8 stainless steel for good chemical resistance.

Super-Corrosion-Resistant 316
Stainless Steel Socket Head Screws

More corrosion resistant than 18-8 stainless steel screws, these 316 stainless steel screws have excellent resistance to chemicals and salt water.

High-Strength 316 Stainless
Steel Socket Head Screws

These screws are hardened to be 40% stronger than standard 316 stainless steel screws, yet they still have excellent corrosion resistance. Use them in chemical and marine applications.

High-Strength A286 Stainless
Steel Socket Head Screws

Often used to fasten parts in engines and turbines, these are our strongest stainless steel screws. They are comparable in strength to alloy steel with the corrosion resistance of 18-8 stainless steel.

Plastic Socket Head Screws

Plastic screws are chemical and oil resistant, nonconductive, and lightweight.

Titanium Socket Head Screws

Our most corrosion-resistant metal screws, titanium screws withstand salt water, acids, and chemicals. They have a high strength-to-weight ratio and are about 40% lighter than steel screws.

Aluminum Socket Head Screws

Aluminum screws are one-third the weight of steel and have good corrosion resistance.

Alloy Steel Low-Profile Socket Head Screws

Made of alloy steel, these low-profile screws are nearly twice as strong as their stainless steel counterparts. With half the height of a standard socket head, these low-profile screws fit in tight spaces.

18-8 Stainless Steel Low-Profile
Socket Head Screws

Nearly as strong as steel, these stainless steel screws won’t rust in outdoor, washdown, and other corrosive environments. With half the height of a standard socket head, these low-profile screws fit in tight spaces.

Super-Corrosion-Resistant 316 Stainless
Steel Low-Profile Socket Head Screws

More corrosion resistant than 18-8 stainless steel screws, these 316 stainless steel screws have excellent resistance to chemicals and salt water. Use these low-profile screws where space is limited.

Flanged Socket Head Screws

These general purpose flanged screws distribute pressure where the screw meets the surface, eliminating the need for a washer.

Exact-Grip-Length Flanged Socket Head Screws

For use where sideways forces are a concern, these screws have a precisely measured unthreaded portion (grip) for a strong hold. Their flanged head distributes pressure where the screw meets the surface, so you don't need a washer.

Serrated-Flange Socket Head Screws

Serrations under the head grip the material's surface for mild vibration resistance. The flange distributes pressure across the material's surface, eliminating the need for a washer.

Alloy Steel Thread-Locking Socket Head Screws

With a tensile strength of 170,000 psi, these alloy steel screws are among the strongest we carry. They are stronger than Grade 8 steel screws and are nearly two and a half times stronger than stainless steel thread-locking screws. They have a thread locker to prevent loosening from vibration.

18-8 Stainless Steel Thread-Locking
Socket Head Screws

These screws have good chemical resistance. A thread locker bonded to the threads prevents loosening from vibration.

Super-Corrosion-Resistant 316 Stainless
Steel Thread-Locking Socket Head Screws

More corrosion resistant than 18-8 stainless steel screws, these screws have excellent resistance to chemicals and salt water. They have a thread locker to resist vibration.

Stainless Steel Wire-Lockable Socket Head Screws

Stainless steel screws have excellent corrosion resistance in most environments. Wire these screws together for more vibration resistance than other types of socket head screws.

Alloy Steel Wire-Lockable Socket Head Screws

With a tensile strength of 170,000 psi, these alloy steel screws are among the strongest we carry. They are stronger than Grade 8 steel screws and are more than twice as strong as stainless steel wire-lockable screws. These resist vibration better than any other socket head screw.

Sealing Socket Head Screws

A rubber O-ring under the head of these screws prevents leaks and seals out contaminants.

Socket Head Screws for Square-Drive Wrenches

No need for separate bits—these screws lock directly onto square-drive socket wrenches, reducing the risk of dropping parts during installation.

Socket Head Screws with Flat Washer

A freely rotating washer distributes pressure over a wider area than a flange, preventing damage to your material's surface.

Vented Socket Head Screws

Drilled through the head and shaft, these screws vent fluid and gases trapped below the screw, making them good for vacuum applications.

Nylon-Tip Alloy Steel Socket Head Screws

Nonconductive and softer than brass, the nylon tip reduces vibration and eliminates damage from metal touching metal.

Brass-Tip Alloy Steel Socket Head Screws

The nonmarring brass tip is electrically conductive and harder than nylon, but soft enough to conform to most surfaces and reduce damage from metal-on-metal contact.

Vibration-Resistant Sealing Socket Head Screws

The nylon patch bonded to the threads of these socket head screws adds friction to keep vibration from loosening them, while their O-ring prevents leaks and seals out contaminants.

Flat Head Screws

18-8 Stainless Steel Hex Drive Flat Head Screws

These 18-8 stainless steel screws have good chemical resistance and may be mildly magnetic.

Metric 18-8 Stainless Steel
Hex Drive Flat Head Screws

These metric 18-8 stainless steel screws have good chemical resistance and may be mildly magnetic.

Metric 316 Stainless Steel
Hex Drive Flat Head Screws

More corrosion resistant than 18-8 stainless steel screws, these metric screws have excellent resistance to chemicals and salt water. They may be mildly magnetic.

Mil. Spec. Stainless Steel
Hex Drive Flat Head Screws

Choose these screws for their adherence to strict military standards for material and construction.

Alloy Steel Hex Drive Flat Head Screws

Metric Alloy Steel Hex Drive Flat Head Screws

Brass Hex Drive Flat Head Screws

Brass screws are electrically conductive, nonmagnetic, and have good corrosion resistance.

Alloy Steel Torx Flat Head Screws

Made from alloy steel, these screws are twice as strong as standard steel Torx flat head screws.

18-8 Stainless Steel Torx Flat Head Screws

These 18-8 stainless steel screws have good chemical resistance and may be mildly magnetic.

Steel Torx Flat Head Screws

Lower strength than alloy steel, use these screws for light duty fastening.

Stainless Steel Thread-Locking
Hex Drive Flat Head Screws

Stainless steel screws have excellent corrosion resistance in most environments.

Alloy Steel Thread-Locking
Hex Drive Flat Head Screws

Made from alloy steel, these screws are nearly twice as strong as stainless steel flat head screws.

Vented Flat Head Screws

These screws are drilled through the shaft to vent fluids and gases trapped under the screw.

Rounded Head Screws

Metric 18-8 Stainless Steel
Button Head Hex Drive Screws

Alloy Steel Button Head Hex Drive Screws

Metric Alloy Steel Button Head Hex Drive Screws

These metric alloy steel screws are nearly twice as strong as stainless steel button head screws.

18-8 Stainless Steel Button Head Torx Screws

Made from 18-8 stainless steel, these screws have good chemical resistance and may be mildly magnetic. Torx and Torx-Plus drives have more points of contact than other drives, allowing you to tighten the screw without damaging the recess.

Alloy Steel Button Head Torx Screws

Made from alloy steel, these screws are three times stronger than standard steel button head Torx screws. A Torx-Plus drive has more points of contact than other drives, allowing you to tighten the screw without damaging the recess.

18-8 Stainless Steel Flanged Button Head Screws

18-8 stainless steel screws have good chemical resistance and may be mildly magnetic. The flange distributes pressure across a wide surface, eliminating the need for a separate washer.

Metric Alloy Steel Flanged Button Head Screws

These metric alloy steel screws are nearly twice as strong as stainless steel button head screws. They have a flange that distributes pressure across a wide surface, eliminating the need for a separate washer.

Stainless Steel Tamper-Resistant
Button Head Torx Screws

These 18-8 stainless steel button head screws have good chemical resistance and may be mildly magnetic. The tamper-resistant Torx drive (also known as a pin-in Torx drive) makes them difficult to remove without special tools.