Filter by
Fabrication
Specifications Met
DFARS Specialty Metals
Yield Strength
About Stainless Steel
Compare over 25 types of stainless steel to find the right material for you—all with material certificates for traceability.
Multipurpose 304 Stainless Steel
From cookware to chemical-processing equipment, 304 stainless steel is a good all-around choice for a wide range of applications. It maintains its corrosion resistance in temperatures up to 1500° F.
Bars with rolled edges are also known as true bar; the edges are more precise than sheared edges.
Bars with sheared edges are also known as Gauer bar and are sheared from plate.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
304 Stainless Steel Bars
- Yield Strength: 30,000 psi
- Hardness: See Table
- Heat Treatment: Annealed (Softened)
- Heat Treatable: No
- Specifications Met: See Table
| Wd. | Wd. Tolerance | Fabrication | Edge Fabrication | Hardness | Specifications Met | Straightness Tolerance | 1/2 ft. Lg. | 1 ft. Lg. | 2 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
1/8" (-0.01" to 0.01" Tolerance) | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3/4" | -0.031" to 0.094" | Hot Rolled | Sheared | Rockwell B75 (Medium) | ASTM A240 | Not Rated | 00000000 | |||||
| 1" | -0.031" to 0.094" | Hot Rolled | Sheared | Rockwell B75 (Medium) | ASTM A240 | Not Rated | 00000000 | |||||
| 1 1/4" | -0.031" to 0.094" | Hot Rolled | Sheared | Rockwell B75 (Medium) | ASTM A240 | Not Rated | 00000000 | |||||
| 1 1/2" | -0.031" to 0.094" | Hot Rolled | Sheared | Rockwell B75 (Medium) | ASTM A240 | Not Rated | 00000000 | |||||
| 2" | -0.031" to 0.094" | Hot Rolled | Sheared | Rockwell B75 (Medium) | ASTM A240 | Not Rated | 00000000 | |||||
3/16" (-0.008" to 0.008" Tolerance) | ||||||||||||
| 1" | -0.008" to -0.008" | Hot Rolled | Rolled | Rockwell B75 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 1 1/4" | -0.012" to 0.012" | Hot Rolled | Rolled | Rockwell B75 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 1 1/2" | -0.012" to 0.012" | Hot Rolled | Rolled | Rockwell B75 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 2" | -0.012" to 0.012" | Hot Rolled | Rolled | Rockwell B75 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 2 1/2" | -0.015" to 0.015" | Hot Rolled | Rolled | Rockwell B75 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 3" | -0.015" to 0.015" | Hot Rolled | Rolled | Rockwell B75 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
1/4" (-0.015" to 0.015" Tolerance) | ||||||||||||
| 1/2" | -0.031" to 0.094" | Hot Rolled | Rolled | Rockwell B90 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 3/4" | -0.031" to 0.094" | Hot Rolled | Rolled | Rockwell B90 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 1" | -0.031" to 0.094" | Hot Rolled | Rolled | Rockwell B90 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 1 1/4" | -0.031" to 0.094" | Hot Rolled | Rolled | Rockwell B90 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 1 1/2" | -0.031" to 0.094" | Hot Rolled | Rolled | Rockwell B90 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 1 3/4" | -0.031" to 0.094" | Hot Rolled | Rolled | Rockwell B90 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 2" | -0.031" to 0.094" | Hot Rolled | Rolled | Rockwell B90 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 2 1/2" | -0.031" to 0.094" | Hot Rolled | Rolled | Rockwell B90 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 3" | -0.031" to 0.094" | Hot Rolled | Rolled | Rockwell B90 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 3 1/2" | -0.031" to 0.094" | Hot Rolled | Rolled | Rockwell B90 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 4" | -1/8" to 1/8" | Hot Rolled | Rolled | Rockwell B90 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
1/4" (-0.012" to 0.012" Tolerance) | ||||||||||||
| 1" | -0.012" to 0.012" | Cold Worked | __ | Not Rated | ASTM A276 | Not Rated | 00000000 | |||||
| 2" | -0.012" to 0.012" | Cold Worked | __ | Not Rated | ASTM A276 | Not Rated | 00000000 | |||||
1/4" (-0.01" to 0.085" Tolerance) | ||||||||||||
| 1/4" | -0.012" to 0.012" | Cold Worked | __ | Not Rated | ASTM A276 | Not Rated | 00000000 | |||||
5/16" (-0.012" to 0.012" Tolerance) | ||||||||||||
| 1" | -0.031" to 0.094" | Hot Rolled | Rolled | Rockwell B90 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 2" | -0.031" to 0.094" | Hot Rolled | Rolled | Rockwell B90 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
3/8" (-0.015" to 0.015" Tolerance) | ||||||||||||
| 1/2" | -0.031" to 0.094" | Hot Rolled | Rolled | Rockwell B90 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 3/4" | -0.031" to 0.094" | Hot Rolled | Rolled | Rockwell B90 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 1" | -0.031" to 0.094" | Hot Rolled | Rolled | Rockwell B90 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 1 1/4" | -0.031" to 0.094" | Hot Rolled | Rolled | Rockwell B90 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 1 1/2" | -0.031" to 0.094" | Hot Rolled | Rolled | Rockwell B90 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 1 3/4" | -0.031" to 0.094" | Hot Rolled | Rolled | Rockwell B90 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 2" | -0.031" to 0.094" | Hot Rolled | Rolled | Rockwell B90 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 2 1/2" | -0.031" to 0.094" | Hot Rolled | Rolled | Rockwell B90 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 3" | -0.031" to 0.094" | Hot Rolled | Rolled | Rockwell B90 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 4" | -1/8" to 1/8" | Hot Rolled | Rolled | Rockwell B90 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 6" | -1/8" to 1/8" | Hot Rolled | Rolled | Rockwell B90 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
3/8" (-0.012" to 0.012" Tolerance) | ||||||||||||
| 3/8" | -0.012" to 0.012" | Cold Worked | __ | Not Rated | ASTM A276 | Not Rated | 00000000 | |||||
1/2" (-0.015" to 0.015" Tolerance) | ||||||||||||
| 3/4" | -0.031" to 0.094" | Hot Rolled | Rolled | Rockwell B90 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 1" | -0.031" to 0.094" | Hot Rolled | Rolled | Rockwell B90 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 1 1/4" | -0.031" to 0.094" | Hot Rolled | Rolled | Rockwell B90 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 1 1/2" | -0.031" to 0.094" | Hot Rolled | Rolled | Rockwell B90 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 1 3/4" | -0.031" to 0.094" | Hot Rolled | Rolled | Rockwell B90 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 2" | -0.031" to 0.094" | Hot Rolled | Rolled | Rockwell B90 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 2 1/2" | -0.031" to 0.094" | Hot Rolled | Rolled | Rockwell B90 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 3" | -0.031" to 0.094" | Hot Rolled | Rolled | Rockwell B90 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 3 1/2" | -0.031" to 0.094" | Hot Rolled | Rolled | Rockwell B90 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 4" | -1/8" to 1/8" | Hot Rolled | Rolled | Rockwell B90 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 5" | -1/8" to 1/8" | Hot Rolled | Rolled | Rockwell B90 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 6" | -1/8" to 1/8" | Hot Rolled | Rolled | Rockwell B90 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
1/2" (-0.012" to 0.012" Tolerance) | ||||||||||||
| 1/2" | -0.012" to 0.012" | Cold Worked | __ | Not Rated | ASTM A276 | Not Rated | 00000000 | |||||
| 2" | -0.012" to 0.012" | Cold Worked | __ | Not Rated | ASTM A276 | Not Rated | 00000000 | |||||
5/8" (-0.02" to 0.02" Tolerance) | ||||||||||||
| 2 1/2" | -0.031" to 0.062" | Hot Rolled | Rolled | Rockwell B75 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 3" | -0.031" to 0.062" | Hot Rolled | Rolled | Rockwell B75 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 5" | -1/8" to 1/8" | Hot Rolled | Rolled | Rockwell B75 (Medium) | ASTM A276 | Not Rated | 0000000 | |||||
5/8" (-0.015" to 0.015" Tolerance) | ||||||||||||
| 1 1/2" | -0.031" to 0.031" | Hot Rolled | Rolled | Rockwell B75 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 2" | -0.031" to 0.031" | Hot Rolled | Rolled | Rockwell B75 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
5/8" (-0.01" to 0.01" Tolerance) | ||||||||||||
| 1" | -0.015" to 0.015" | Hot Rolled | Rolled | Rockwell B75 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
5/8" (-0.012" to 0.012" Tolerance) | ||||||||||||
| 5/8" | -0.012" to 0.012" | Cold Worked | __ | Not Rated | ASTM A276 | Not Rated | 00000000 | |||||
3/4" (-0.02" to 0.02" Tolerance) | ||||||||||||
| 2 1/2" | -0.031" to 0.062" | Hot Rolled | Rolled | Rockwell B75 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 3" | -0.031" to 0.062" | Hot Rolled | Rolled | Rockwell B75 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 4" | -0.031" to 0.062" | Hot Rolled | Rolled | Rockwell B75 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 5" | -0.062" to 0.093" | Hot Rolled | Rolled | Rockwell B75 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 6" | -0.062" to 0.093" | Hot Rolled | Rolled | Rockwell B75 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
3/4" (-0.015" to 0.015" Tolerance) | ||||||||||||
| 1 1/2" | -0.031" to 0.031" | Hot Rolled | Rolled | Rockwell B75 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 2" | -0.031" to 0.031" | Hot Rolled | Rolled | Rockwell B75 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
3/4" (-0.01" to 0.01" Tolerance) | ||||||||||||
| 1" | -0.015" to 0.015" | Hot Rolled | Rolled | Rockwell B75 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
3/4" (-0.012" to 0.012" Tolerance) | ||||||||||||
| 3/4" | -0.012" to 0.012" | Cold Worked | __ | Not Rated | ASTM A276 | Not Rated | 00000000 | |||||
7/8" (-0.012" to 0.012" Tolerance) | ||||||||||||
| 7/8" | -0.012" to 0.012" | Cold Worked | __ | Not Rated | ASTM A276 | Not Rated | 00000000 | |||||
1" (-0.02" to 0.02" Tolerance) | ||||||||||||
| 2 1/2" | -0.031" to 0.062" | Hot Rolled | Rolled | Rockwell B75 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 3" | -0.031" to 0.062" | Hot Rolled | Rolled | Rockwell B75 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 4" | -0.031" to 0.062" | Hot Rolled | Rolled | Rockwell B75 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 5" | -1/8" to 1/8" | Hot Rolled | Rolled | Rockwell B75 (Medium) | ASTM A276 | Not Rated | 0000000 | |||||
1" (-0.015" to 0.015" Tolerance) | ||||||||||||
| 1 1/4" | -0.031" to 0.031" | Hot Rolled | Rolled | Rockwell B75 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 1 1/2" | -0.031" to 0.031" | Hot Rolled | Rolled | Rockwell B75 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
| 2" | -0.031" to 0.031" | Hot Rolled | Rolled | Rockwell B75 (Medium) | ASTM A276 | Not Rated | 00000000 | |||||
1" (-0.012" to 0.012" Tolerance) | ||||||||||||
| 1" | -0.012" to 0.012" | Hot Rolled | __ | Not Rated | ASTM A276 | Not Rated | 00000000 | |||||
1 1/4" (-0.012" to 0.012" Tolerance) | ||||||||||||
| 1 1/4" | -0.012" to 0.012" | Hot Rolled | __ | Not Rated | ASTM A276 | Not Rated | 00000000 | |||||
1 1/2" (-0.01" to -0.075" Tolerance) | ||||||||||||
| 6" | -1/8" to 1/8" | Hot Rolled | Sheared | Rockwell B90 (Medium) | ASTM A240 | Not Rated | 0000000 | |||||
1 1/2" (-0.012" to 0.012" Tolerance) | ||||||||||||
| 1 1/2" | -0.012" to 0.012" | Hot Rolled | __ | Not Rated | ASTM A276 | Not Rated | 00000000 | |||||
2" (-0.01" to 0.15" Tolerance) | ||||||||||||
| 6" | -1/8" to 1/8" | Hot Rolled | Sheared | Rockwell B90 (Medium) | ASTM A240 | Not Rated | 0000000 | |||||
2" (-0.012" to 0.012" Tolerance) | ||||||||||||
| 2" | -0.012" to 0.012" | Hot Rolled | __ | Not Rated | ASTM A276 | Not Rated | 00000000 | |||||
2 1/2" (-0.01" to 0.15" Tolerance) | ||||||||||||
| 6" | -1/8" to 1/8" | Hot Rolled | Sheared | Rockwell B90 (Medium) | ASTM A240 | Not Rated | 0000000 | |||||
3" (-0.01" to 0.16" Tolerance) | ||||||||||||
| 6" | -1/8" to 1/8" | Hot Rolled | Sheared | Rockwell B90 (Medium) | ASTM A240 | Not Rated | 0000000 | |||||
4" (-0.01" to 0.2" Tolerance) | ||||||||||||
| 6" | -1/8" to 1/8" | Hot Rolled | Sheared | Rockwell B90 (Medium) | ASTM A240 | Not Rated | 0000000 | |||||
5" (-0.01" to 0.2" Tolerance) | ||||||||||||
| 6" | -1/8" to 1/8" | Hot Rolled | Sheared | Rockwell B90 (Medium) | ASTM A240 | Not Rated | 0000000 | |||||
Corrosion-Resistant 316 Stainless Steel
The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications. It maintains its corrosion resistance up to the maximum temperature.
316/316L stainless steel contains less carbon than standard 316 for better weldability.
Bars with rolled edges are also known as true bar.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Bars
- Yield Strength: 30,000 psi
- Hardness: Rockwell B90 (Medium)
- Heat Treatment: Annealed (Softened)
- Heat Treatable: No
- Specifications Met: ASTM A276
| Thick. | Thick. Tolerance | Wd. | Fabrication | Edge Fabrication | Max. Temp., °F | 1/2 ft. Lg. | 1 ft. Lg. | 2 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
316/316L Stainless Steel  | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 3/16" | -0.006" to 0.006" | 3/16" | Cold Worked | __ | 1500° | 00000000 | |||||
| 3/16" | -0.008" to 0.008" | 1" | Hot Rolled | Rolled | 1500° | 0000000 | |||||
| 1/4" | -0.006" to 0.006" | 1/4" | Cold Worked | __ | 1500° | 00000000 | |||||
| 1/4" | -0.006" to 0.006" | 1" | Cold Worked | __ | 1500° | 00000000 | |||||
| 1/4" | -0.015" to 0.015" | 1/2" | Hot Rolled | Rolled | 1500° | 0000000 | |||||
| 1/4" | -0.015" to 0.015" | 1" | Hot Rolled | Rolled | 1500° | 0000000 | |||||
| 1/4" | -0.015" to 0.015" | 1 1/4" | Hot Rolled | Rolled | 1500° | 0000000 | |||||
| 1/4" | -0.015" to 0.015" | 1 1/2" | Hot Rolled | Rolled | 1500° | 0000000 | |||||
| 1/4" | -0.015" to 0.015" | 2" | Hot Rolled | Rolled | 1500° | 0000000 | |||||
| 1/4" | -0.015" to 0.015" | 3" | Hot Rolled | Rolled | 1500° | 0000000 | |||||
| 1/4" | -0.015" to 0.015" | 4" | Hot Rolled | Rolled | 1500° | 0000000 | |||||
| 5/16" | -0.006" to 0.006" | 5/16" | Cold Worked | __ | 1500° | 00000000 | |||||
| 3/8" | -0.006" to 0.006" | 3/8" | Cold Worked | __ | 1500° | 00000000 | |||||
| 3/8" | -0.012" to 0.012" | 3/4" | Hot Rolled | Rolled | 1500° | 0000000 | |||||
| 3/8" | -0.012" to 0.012" | 1" | Hot Rolled | Rolled | 1500° | 0000000 | |||||
| 3/8" | -0.012" to 0.012" | 1 1/4" | Hot Rolled | Rolled | 1500° | 0000000 | |||||
| 3/8" | -0.012" to 0.012" | 1 1/2" | Hot Rolled | Rolled | 1500° | 0000000 | |||||
| 3/8" | -0.012" to 0.012" | 2" | Hot Rolled | Rolled | 1500° | 0000000 | |||||
| 7/16" | -0.006" to 0.006" | 7/16" | Cold Worked | __ | 1500° | 00000000 | |||||
| 1/2" | -0.006" to 0.006" | 1/2" | Cold Worked | __ | 1500° | 00000000 | |||||
| 1/2" | -0.006" to 0.006" | 1" | Cold Worked | __ | 1500° | 00000000 | |||||
| 1/2" | -0.006" to 0.006" | 2" | Cold Worked | __ | 1500° | 00000000 | |||||
| 1/2" | -0.015" to 0.015" | 1" | Hot Rolled | Rolled | 1500° | 0000000 | |||||
| 1/2" | -0.015" to 0.015" | 1 1/4" | Hot Rolled | Rolled | 1500° | 0000000 | |||||
| 1/2" | -0.015" to 0.015" | 1 1/2" | Hot Rolled | Rolled | 1500° | 0000000 | |||||
| 1/2" | -0.015" to 0.015" | 2" | Hot Rolled | Rolled | 1500° | 0000000 | |||||
| 1/2" | -0.015" to 0.015" | 3" | Hot Rolled | Rolled | 1500° | 0000000 | |||||
| 1/2" | -0.015" to 0.015" | 4" | Hot Rolled | Rolled | 1500° | 0000000 | |||||
| 9/16" | -0.006" to 0.006" | 9/16" | Cold Worked | __ | 1500° | 00000000 | |||||
| 5/8" | -0.02" to 0.02" | 1" | Hot Rolled | Rolled | 1500° | 0000000 | |||||
| 5/8" | -0.02" to 0.02" | 1 1/4" | Hot Rolled | Rolled | 1500° | 0000000 | |||||
| 5/8" | -0.02" to 0.02" | 1 1/2" | Hot Rolled | Rolled | 1500° | 0000000 | |||||
| 5/8" | -0.02" to 0.02" | 2" | Hot Rolled | Rolled | 1500° | 0000000 | |||||
| 5/8" | -0.02" to 0.02" | 3" | Hot Rolled | Rolled | 1500° | 0000000 | |||||
| 5/8" | -0.012" to 0.012" | 5/8" | Cold Worked | __ | 1500° | 00000000 | |||||
| 3/4" | -0.02" to 0.02" | 1" | Hot Rolled | Rolled | 1500° | 0000000 | |||||
| 3/4" | -0.02" to 0.02" | 1 1/2" | Hot Rolled | Rolled | 1500° | 0000000 | |||||
| 3/4" | -0.02" to 0.02" | 2" | Hot Rolled | Rolled | 1500° | 0000000 | |||||
| 3/4" | -0.02" to 0.02" | 3" | Hot Rolled | Rolled | 1500° | 0000000 | |||||
| 3/4" | -0.02" to 0.02" | 4" | Hot Rolled | Rolled | 1500° | 0000000 | |||||
| 3/4" | -0.012" to 0.012" | 3/4" | Cold Worked | __ | 1500° | 00000000 | |||||
| 7/8" | -0.012" to 0.012" | 7/8" | Cold Worked | __ | 1500° | 00000000 | |||||
| 1" | -0.02" to 0.02" | 1 1/2" | Hot Rolled | Rolled | 1500° | 0000000 | |||||
| 1" | -0.02" to 0.02" | 2" | Hot Rolled | Rolled | 1500° | 0000000 | |||||
| 1" | -0.02" to 0.02" | 3" | Hot Rolled | Rolled | 1500° | 0000000 | |||||
| 1" | -0.012" to 0.012" | 1" | Cold Worked | __ | 1500° | 00000000 | |||||
| 1 1/8" | -0.012" to 0.012" | 1 1/8" | Cold Worked | __ | 1500° | 00000000 | |||||
| 1 1/4" | -0.012" to 0.012" | 1 1/4" | Cold Worked | __ | 1500° | 00000000 | |||||
| 1 1/2" | -0.012" to 0.012" | 1 1/2" | Cold Worked | __ | 1500° | 00000000 | |||||
| 1 1/2" | -0.031" to 0.031" | 2" | Hot Rolled | Rolled | 1500° | 0000000 | |||||
| 1 1/2" | -0.031" to 0.031" | 3" | Hot Rolled | Rolled | 1500° | 0000000 | |||||
| 1 3/4" | -0.012" to 0.012" | 1 3/4" | Cold Worked | __ | 1500° | 00000000 | |||||
| 2" | -0.031" to 0.031" | 3" | Hot Rolled | Rolled | 1500° | 0000000 | |||||
| 2" | 0" to 0.032" | 2" | Cold Worked | __ | 1500° | 00000000 | |||||
| 2 1/2" | 0" to 0.032" | 2 1/2" | Cold Worked | __ | 1500° | 00000000 | |||||
Hardened High-Strength 17-4 PH Stainless Steel
This material is hardened for improved strength and wear resistance. With a higher chromium content than 15-5 PH stainless steel, this high-strength 17-4 PH offers better corrosion resistance. It is also known as 630 stainless steel. This material maintains its corrosion resistance in temperatures up to 1100° F.
Bars have rolled edges; they are also known as true bar.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Bars
- Yield Strength: 190,000 psi
- Hardness: Rockwell C45 (Hard)
- Heat Treatment: Hardened
- Temper: H900
- Specifications Met: ASTM A564
3 ft. Lg. | ||||
|---|---|---|---|---|
| Wd. | Fabrication | Magnetic Properties | Each | |
1/4" Thick (-0.02" to 0.02") | ||||
| 3/4" | Hot Rolled | Magnetic | 0000000 | 0000000 |
| 1" | Hot Rolled | Magnetic | 0000000 | 000000 |
| 2" | Hot Rolled | Magnetic | 0000000 | 000000 |
1/2" Thick (-0.02" to 0.02") | ||||
| 3/4" | Hot Rolled | Magnetic | 0000000 | 000000 |
| 1" | Hot Rolled | Magnetic | 0000000 | 000000 |
| 1 1/2" | Hot Rolled | Magnetic | 0000000 | 000000 |
| 2" | Hot Rolled | Magnetic | 0000000 | 000000 |
| 3" | Hot Rolled | Magnetic | 0000000 | 000000 |
3/4" Thick (-0.02" to 0.02") | ||||
| 1" | Hot Rolled | Magnetic | 0000000 | 000000 |
| 2" | Hot Rolled | Magnetic | 0000000 | 000000 |
| 3" | Hot Rolled | Magnetic | 0000000 | 000000 |
1" Thick (-0.031" to 0.031") | ||||
| 1" | Hot Rolled | Magnetic | 0000000 | 000000 |
| 1 1/2" | Hot Rolled | Magnetic | 0000000 | 000000 |
| 2" | Hot Rolled | Magnetic | 0000000 | 000000 |
| 3" | Hot Rolled | Magnetic | 0000000 | 00000000 |
1 1/2" Thick (-0.031" to 0.031") | ||||
| 1 1/2" | Hot Rolled | Magnetic | 0000000 | 00000000 |
| 2" | Hot Rolled | Magnetic | 0000000 | 00000000 |
| 3" | Hot Rolled | Magnetic | 0000000 | 00000000 |
Bearing-Quality 440C Stainless Steel
One of the hardest types of stainless steel after heat treating, 440C offers excellent wear and abrasion resistance. It’s often used for bearings, valves, and knife blades. This material maintains its corrosion resistance in temperatures up to 800° F.
Bars are also known as true bar; they are rolled for a precise edge.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Bars
- Yield Strength: Not Rated
- Hardness: Rockwell C30 (Hard)
- Heat Treatment: Annealed (Softened)
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: Rockwell C60
- Specifications Met: ASTM A276, SAE AMS5630
| Wd. | Fabrication | Straightness Tolerance | Magnetic Properties | 1/2 ft. Lg. | 1 ft. Lg. | 2 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
1/4" Thick. (-0.015" to 0.015" Tolerance) | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1" | Hot Rolled | 1/8" per 5 ft. | Magnetic | 000000000 | |||||
| 1 1/2" | Hot Rolled | 1/8" per 5 ft. | Magnetic | 000000000 | |||||
| 2" | Hot Rolled | 1/8" per 5 ft. | Magnetic | 000000000 | |||||
3/8" Thick. (-0.015" to 0.015" Tolerance) | |||||||||
| 1" | Hot Rolled | 1/8" per 5 ft. | Magnetic | 000000000 | |||||
| 2" | Hot Rolled | 1/8" per 5 ft. | Magnetic | 000000000 | |||||
| 3" | Hot Rolled | 1/8" per 5 ft. | Magnetic | 000000000 | |||||
1/2" Thick. (-0.015" to 0.015" Tolerance) | |||||||||
| 3/4" | Hot Rolled | 1/8" per 5 ft. | Magnetic | 000000000 | |||||
| 1" | Hot Rolled | 1/8" per 5 ft. | Magnetic | 000000000 | |||||
| 1 1/2" | Hot Rolled | 1/8" per 5 ft. | Magnetic | 000000000 | |||||
| 2" | Hot Rolled | 1/8" per 5 ft. | Magnetic | 000000000 | |||||
| 3" | Hot Rolled | 1/8" per 5 ft. | Magnetic | 000000000 | |||||
3/4" Thick. (-0.02" to 0.02" Tolerance) | |||||||||
| 1" | Hot Rolled | 1/8" per 5 ft. | Magnetic | 000000000 | |||||
| 1 1/2" | Hot Rolled | 1/8" per 5 ft. | Magnetic | 000000000 | |||||
| 3" | Hot Rolled | 1/8" per 5 ft. | Magnetic | 000000000 | |||||
1" Thick. (-0.02" to 0.02" Tolerance) | |||||||||
| 1 1/2" | Hot Rolled | 1/8" per 5 ft. | Magnetic | 000000000 | |||||
| 2" | Hot Rolled | 1/8" per 5 ft. | Magnetic | 000000000 | |||||
| 3" | Hot Rolled | 1/8" per 5 ft. | Magnetic | 000000000 | |||||
| 4" | Hot Rolled | 1/8" per 5 ft. | Magnetic | 000000000 | |||||