McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    489 Products

    Shim Stock

    Image of Product. Front orientation. Shim Stock. Sold Individually.
    Cut into custom shapes to create shims that suit your needs. With thickness tolerances as fine as a strand of hair, the shims will precisely align, space, and level components on dies, presses, and machinery.
    You can stack multiple shims to achieve your exact thickness, but stacking more than four may cause them to shift. Remember, fewer shims are better, so a couple of thicker shims are more stable than a bunch of thin shims.
    Sheets—Shim stock comes in sheets that are flat packed.
    18-8 Stainless Steel—The choice for wet and outdoor areas because it resists rust. However, it will corrode or pit when exposed to salt water and chemicals.
    Super-Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, it won't degrade when exposed to harsh weather, salt water, and most chemicals.
    High-Strength 17-7 PH Stainless Steel—Similar in strength to steel, it won’t rust in wet and outdoor areas but can’t withstand harsh chemicals like 316 stainless steel.
    Extreme-Strength 17-4 PH Stainless Steel—Stronger than 17-7 PH stainless steel, it won’t rust in wet and outdoor areas but can’t withstand harsh chemicals like 316 stainless steel.
    Temper Rating—Choose half hard to create shims that you’ll need to bend or shape. Opt for full hard to make stronger shims that will maintain their shape under loads.
    Certificate
    Thk.
    Thk. Tolerance
    Temper
    Rating
    Type
    Form
    Specs. Met
    Form
    Each
    18-8 Stainless Steel
     
    6" Wide × 12" Long
    0.001"-0.0001" to 0.0001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Sheet0000000000000
    0.002"-0.0001" to 0.0001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Sheet0000000000000
    0.005"-0.00025" to 0.00025"1/2 HardMaterial CertificatePaperASTM A666Sheet000000000000
    0.005"-0.00025" to 0.00025"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Sheet0000000000000
    0.01"-0.0005" to 0.0005"1/2 HardMaterial CertificatePaperASTM A666Sheet000000000000
    0.01"-0.0005" to 0.0005"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Sheet0000000000000
    0.015"-0.0005" to 0.0005"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Sheet000000000000
    0.02"-0.001" to 0.001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Sheet0000000000000
     
    6" Wide × 25" Long
    0.0005"-0.00005" to 0.00005"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Sheet0000000000000
    0.001"-0.00005" to 0.00005"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet000000000000
    0.0015"-0.0001" to 0.0001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Sheet0000000000000
    0.002"-0.0001" to 0.0001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet000000000000
    0.003"-0.00015" to 0.00015"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet000000000000
    0.004"-0.0002" to 0.0002"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet000000000000
    0.005"-0.00025" to 0.00025"1/2 HardMaterial CertificatePaperASTM A666Sheet0000000000000
    0.005"-0.00025" to 0.00025"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet000000000000
    0.006"-0.0003" to 0.0003"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet000000000000
    0.007"-0.00035" to 0.00035"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet000000000000
    0.008"-0.0004" to 0.0004"1/2 HardMaterial CertificatePaperASTM A666Sheet0000000000000
    0.008"-0.0004" to 0.0004"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet000000000000
    0.009"-0.00045" to 0.00045"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet000000000000
    0.01"-0.0005" to 0.0005"1/2 HardMaterial CertificatePaperASTM A666Sheet0000000000000
    0.01"-0.0005" to 0.0005"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet000000000000
    0.012"-0.0006" to 0.0006"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet0000000000000
    0.015"-0.0009" to 0.0009"1/2 HardMaterial CertificatePaperASTM A666Sheet0000000000000
    0.015"-0.0009" to 0.0009"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet0000000000000
    0.02"-0.001" to 0.001"1/2 HardMaterial CertificatePaperASTM A666Sheet0000000000000
    0.02"-0.001" to 0.001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet0000000000000
    0.025"-0.00125" to 0.00125"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet0000000000000
    0.031"-0.00155" to 0.00155"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet0000000000000
     
    6" Wide × 50" Long
    0.0005"-0.00003" to 0.00003"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.001"-0.0001" to 0.0001"Full HardMaterial CertificatePaperASTM A666Roll0000000000000
    0.001"-0.0001" to 0.0001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.0015"-0.00007" to 0.00007"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.002"-0.0002" to 0.0002"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.002"-0.0001" to 0.0001"1/2 HardMaterial CertificatePaperASTM A666Roll000000000000
    0.003"-0.0002" to 0.0002"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.003"-0.00015" to 0.00015"1/2 HardMaterial CertificatePaperASTM A666Roll000000000000
    0.004"-0.0002" to 0.0002"1/2 HardMaterial CertificatePaperASTM A666Roll000000000000
    0.004"-0.0002" to 0.0002"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.005"-0.0003" to 0.0003"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.005"-0.00025" to 0.00025"1/2 HardMaterial CertificatePaperASTM A666Roll000000000000
    0.006"-0.0003" to 0.0003"1/2 HardMaterial CertificatePaperASTM A666Roll000000000000
    0.006"-0.0003" to 0.0003"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.007"-0.0004" to 0.0004"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.007"-0.00035" to 0.00035"1/2 HardMaterial CertificatePaperASTM A666Roll000000000000
    0.008"-0.0004" to 0.0004"1/2 HardMaterial CertificatePaperASTM A666Roll000000000000
    0.008"-0.0004" to 0.0004"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.009"-0.00045" to 0.00045"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.01"-0.0005" to 0.0005"1/2 HardMaterial CertificatePaperASTM A666Roll000000000000
    0.01"-0.0005" to 0.0005"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.012"-0.001" to 0.001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.012"-0.0006" to 0.0006"1/2 HardMaterial CertificatePaperASTM A666Roll000000000000
    0.015"-0.001" to 0.001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.015"-0.00075" to 0.00075"1/2 HardMaterial CertificatePaperASTM A666Roll000000000000
    0.018"-0.0009" to 0.0009"1/2 HardMaterial CertificatePaperASTM A666Roll000000000000
    0.02"-0.001" to 0.001"1/2 HardMaterial CertificatePaperASTM A666Roll000000000000
    0.02"-0.001" to 0.001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.025"-0.00125" to 0.00125"1/2 HardMaterial CertificatePaperASTM A666Roll000000000000
    0.025"-0.001" to 0.001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.031"-0.00155" to 0.00155"1/2 HardMaterial CertificatePaperASTM A666Roll000000000000
    0.031"-0.0015" to 0.0015"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.035"-0.00175" to 0.00175"1/2 HardMaterial CertificatePaperASTM A666Roll000000000000
     
    6" Wide × 60" Long
    0.001"-0.0001" to 0.0001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Roll0000000000000
    0.01"-0.0005" to 0.0005"1/2 HardMaterial CertificatePaperASTM A666Roll0000000000000
    0.01"-0.0005" to 0.0005"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Roll0000000000000
     
    6" Wide × 100" Long
    0.0005"-0.00003" to 0.00003"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll00000000000000
    0.001"-0.0001" to 0.0001"Full HardMaterial CertificatePaperASTM A666Roll0000000000000
    0.001"-0.0001" to 0.0001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll0000000000000
    0.0015"-0.00007" to 0.00007"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll0000000000000
    0.002"-0.0002" to 0.0002"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll0000000000000
    0.002"-0.0001" to 0.0001"1/2 HardMaterial CertificatePaperASTM A666Roll0000000000000
    0.003"-0.0002" to 0.0002"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll0000000000000
    0.003"-0.00015" to 0.00015"1/2 HardMaterial CertificatePaperASTM A666Roll0000000000000
    0.004"-0.0002" to 0.0002"1/2 HardMaterial CertificatePaperASTM A666Roll0000000000000
    0.004"-0.0002" to 0.0002"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll0000000000000
    0.005"-0.0003" to 0.0003"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll0000000000000
    0.005"-0.00025" to 0.00025"1/2 HardMaterial CertificatePaperASTM A666Roll0000000000000
    0.006"-0.0003" to 0.0003"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll0000000000000
    0.007"-0.0004" to 0.0004"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll0000000000000
    0.008"-0.0004" to 0.0004"1/2 HardMaterial CertificatePaperASTM A666Roll0000000000000
    0.008"-0.0004" to 0.0004"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll0000000000000
    0.009"-0.00045" to 0.00045"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll0000000000000
    0.01"-0.0005" to 0.0005"1/2 HardMaterial CertificatePaperASTM A666Roll0000000000000
    0.01"-0.0005" to 0.0005"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll0000000000000
    0.012"-0.001" to 0.001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll0000000000000
    0.015"-0.001" to 0.001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll0000000000000
    0.015"-0.00075" to 0.00075"1/2 HardMaterial CertificatePaperASTM A666Roll0000000000000
    0.02"-0.001" to 0.001"1/2 HardMaterial CertificatePaperASTM A666Roll0000000000000
    0.02"-0.001" to 0.001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll0000000000000
    0.025"-0.001" to 0.001"1/2 HardMaterial CertificatePaperASTM A666Roll0000000000000
    0.025"-0.001" to 0.001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll0000000000000
    0.031"-0.002" to 0.002"Full HardMaterial CertificatePaperASTM A666Roll00000000000000
    0.031"-0.0015" to 0.0015"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll0000000000000
     
    8" Wide × 12" Long
    0.0005"-0.00005" to 0.00005"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Sheet0000000000000
    0.001"-0.0001" to 0.0001"Full HardMaterial CertificatePaperASTM A666Sheet000000000000
    0.001"-0.00005" to 0.00005"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet0000000000000
    0.0015"-0.0001" to 0.0001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Sheet0000000000000
    0.002"-0.0001" to 0.0001"1/2 HardMaterial CertificatePaperASTM A666Sheet000000000000
    0.002"-0.0001" to 0.0001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet0000000000000
    0.003"-0.00015" to 0.00015"1/2 HardMaterial CertificatePaperASTM A666Sheet000000000000
    0.003"-0.00015" to 0.00015"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet0000000000000
    0.004"-0.0002" to 0.0002"1/2 HardMaterial CertificatePaperASTM A666Sheet000000000000
    0.004"-0.0002" to 0.0002"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet0000000000000
    0.005"-0.00025" to 0.00025"1/2 HardMaterial CertificatePaperASTM A666Sheet0000000000000
    0.005"-0.00025" to 0.00025"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet0000000000000
    0.006"-0.0003" to 0.0003"1/2 HardMaterial CertificatePaperASTM A666Sheet0000000000000
    0.006"-0.0003" to 0.0003"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet000000000000
    0.007"-0.00035" to 0.00035"1/2 HardMaterial CertificatePaperASTM A666Sheet0000000000000
    0.007"-0.00035" to 0.00035"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet0000000000000
    0.008"-0.0004" to 0.0004"1/2 HardMaterial CertificatePaperASTM A666Sheet0000000000000
    0.008"-0.0004" to 0.0004"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet0000000000000
    0.009"-0.00045" to 0.00045"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet0000000000000
    0.01"-0.0005" to 0.0005"1/2 HardMaterial CertificatePaperASTM A666Sheet0000000000000
    0.01"-0.0005" to 0.0005"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet0000000000000
    0.012"-0.0006" to 0.0006"1/2 HardMaterial CertificatePaperASTM A666Sheet0000000000000
    0.012"-0.0006" to 0.0006"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet0000000000000
    0.015"-0.0009" to 0.0009"1/2 HardMaterial CertificatePaperASTM A666Sheet0000000000000
    0.015"-0.0009" to 0.0009"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet0000000000000
    0.018"-0.001" to 0.001"1/2 HardMaterial CertificatePaperASTM A666Sheet0000000000000
    0.02"-0.001" to 0.001"1/2 HardMaterial CertificatePaperASTM A666Sheet0000000000000
    0.02"-0.001" to 0.001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet0000000000000
    0.025"-0.00125" to 0.00125"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet0000000000000
    0.025"-0.001" to 0.001"1/2 HardMaterial CertificatePaperASTM A666Sheet0000000000000
    0.03"-0.001" to 0.003"Full HardMaterial CertificatePaperASTM A666Sheet0000000000000
    0.031"-0.00155" to 0.00155"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet0000000000000
    0.031"-0.001" to 0.001"1/2 HardMaterial CertificatePaperASTM A666Sheet0000000000000
    0.035"-0.0015" to 0.0015"1/2 HardMaterial CertificatePaperASTM A666Sheet0000000000000
     
    10" Wide × 12" Long
    0.001"-0.0001" to 0.0001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Sheet0000000000000
    0.002"-0.0001" to 0.0001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Sheet0000000000000
    0.003"-0.00015" to 0.00015"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Sheet0000000000000
    0.004"-0.0002" to 0.0002"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Sheet0000000000000
    0.005"-0.00025" to 0.00025"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Sheet0000000000000
    0.01"-0.0005" to 0.0005"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Sheet0000000000000
    0.015"-0.0009" to 0.0009"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Sheet0000000000000
    0.02"-0.001" to 0.001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Sheet0000000000000
    0.025"-0.001" to 0.001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Sheet0000000000000
    0.031"-0.001" to 0.001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Sheet0000000000000
     
    12" Wide × 12" Long
    0.002"-0.0001" to 0.0001"Full HardMaterial CertificatePaperSAE AMS5906Sheet0000000000000
    0.005"-0.00025" to 0.00025"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Sheet0000000000000
    0.01"-0.0005" to 0.0005"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Sheet0000000000000
    0.015"-0.0005" to 0.0005"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Sheet0000000000000
    0.02"-0.0005" to 0.0005"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Sheet0000000000000
    0.031"-0.0008" to 0.0008"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Sheet0000000000000
     
    12" Wide × 24" Long
    0.001"-0.0001" to 0.0001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Sheet0000000000000
    0.002"-0.0001" to 0.0001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Sheet0000000000000
    0.003"-0.00015" to 0.00015"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Sheet0000000000000
    0.004"-0.0002" to 0.0002"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Sheet0000000000000
    0.005"-0.00025" to 0.00025"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Sheet0000000000000
    0.01"-0.0005" to 0.0005"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Sheet0000000000000
    0.015"-0.0009" to 0.0009"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Sheet0000000000000
    0.02"-0.001" to 0.001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Sheet0000000000000
     
    12" Wide × 50" Long
    0.0005"-0.00003" to 0.00003"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll0000000000000
    0.001"-0.0001" to 0.0001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.0015"-0.00007" to 0.00007"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.002"-0.0002" to 0.0002"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.003"-0.0002" to 0.0002"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.004"-0.0002" to 0.0002"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.005"-0.0003" to 0.0003"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.006"-0.0003" to 0.0003"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.007"-0.0004" to 0.0004"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.008"-0.0004" to 0.0004"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.009"-0.00045" to 0.00045"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.01"-0.0005" to 0.0005"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.012"-0.001" to 0.001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.015"-0.001" to 0.001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.02"-0.001" to 0.001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.025"-0.001" to 0.001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.031"-0.0015" to 0.0015"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
     
    12" Wide × 100" Long
    0.0005"-0.00003" to 0.00003"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll0000000000000
    0.001"-0.0001" to 0.0001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.0015"-0.00007" to 0.00007"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.002"-0.0002" to 0.0002"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.003"-0.0002" to 0.0002"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.004"-0.0002" to 0.0002"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.005"-0.0003" to 0.0003"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.006"-0.0003" to 0.0003"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.007"-0.0004" to 0.0004"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.008"-0.0004" to 0.0004"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.009"-0.00045" to 0.00045"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll0000000000000
    0.01"-0.0005" to 0.0005"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll0000000000000
    0.012"-0.001" to 0.001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll0000000000000
    0.015"-0.001" to 0.001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll0000000000000
    0.02"-0.001" to 0.001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll0000000000000
    0.025"-0.001" to 0.001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll0000000000000
    0.031"-0.0015" to 0.0015"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll0000000000000
     
    12" Wide × 120" Long
    0.001"-0.0001" to 0.0001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Roll0000000000000
    0.002"-0.0001" to 0.0001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Roll00000000000000
    0.003"-0.00015" to 0.00015"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Roll00000000000000
    0.004"-0.0002" to 0.0002"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Roll00000000000000
    0.005"-0.00025" to 0.00025"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Roll00000000000000
    0.008"-0.0004" to 0.0004"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Roll00000000000000
    0.01"-0.001" to 0.001"Full HardMaterial CertificatePaperASTM A666Roll00000000000000
    0.01"-0.0005" to 0.0005"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Roll00000000000000
    0.015"-0.0009" to 0.0009"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Roll00000000000000
    0.02"-0.001" to 0.001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Roll00000000000000
    0.025"-0.001" to 0.001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Roll00000000000000
    0.031"-0.001" to 0.001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Roll00000000000000
     
    24" Wide × 24" Long
    0.001"-0.00005" to 0.00005"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet0000000000000
    0.002"-0.0001" to 0.0001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet0000000000000
    0.003"-0.00015" to 0.00015"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet0000000000000
    0.004"-0.0002" to 0.0002"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet0000000000000
    0.005"-0.00025" to 0.00025"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet0000000000000
    0.006"-0.0003" to 0.0003"Full HardMaterial CertificatePaperASTM A240, ASTM A666, SAE AMS5913Sheet000000000000
    0.007"-0.00035" to 0.00035"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet0000000000000
    0.008"-0.0004" to 0.0004"Full HardMaterial CertificatePaperASTM A240, ASTM A666, SAE AMS5913Sheet000000000000
    0.009"-0.00045" to 0.00045"Full HardMaterial CertificatePaperASTM A240, ASTM A666, SAE AMS5913Sheet000000000000
    0.01"-0.0005" to 0.0005"1/2 HardMaterial CertificatePaperASTM A666Sheet0000000000000
    0.01"-0.0005" to 0.0005"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet0000000000000
    0.012"-0.0006" to 0.0006"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet0000000000000
    0.015"-0.0009" to 0.0009"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet0000000000000
    0.02"-0.001" to 0.001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet00000000000000
    0.025"-0.00125" to 0.00125"Full HardMaterial CertificatePaperASTM A240, ASTM A666, SAE AMS5913Sheet0000000000000
    0.031"-0.00155" to 0.00155"Full HardMaterial CertificatePaperASTM A240, ASTM A666, SAE AMS5913Sheet0000000000000
     
    24" Wide × 50" Long
    0.001"-0.0001" to 0.0001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.0015"-0.00007" to 0.00007"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.002"-0.0002" to 0.0002"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.003"-0.0002" to 0.0002"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.004"-0.0002" to 0.0002"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll000000000000
    0.005"-0.0003" to 0.0003"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet000000000000
    0.006"-0.0003" to 0.0003"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet000000000000
    0.007"-0.0004" to 0.0004"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet000000000000
    0.008"-0.0004" to 0.0004"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet000000000000
    0.009"-0.00045" to 0.00045"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet0000000000000
    0.01"-0.0005" to 0.0005"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet0000000000000
    0.012"-0.001" to 0.001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet0000000000000
    0.015"-0.001" to 0.001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet0000000000000
    0.02"-0.001" to 0.001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet0000000000000
    0.025"-0.001" to 0.001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet0000000000000
    0.031"-0.0015" to 0.0015"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet0000000000000
     
    24" Wide × 100" Long
    0.01"-0.0005" to 0.0005"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906Roll00000000000000
     
    150 mm Wide × 1,250 mm Long
    0.05 mm-0.0025 mm to 0.0025 mmFull HardMaterial CertificatePaperASTM A666Roll0000000000000
    0.1 mm-0.005 mm to 0.005 mmFull HardMaterial CertificatePaperASTM A666Roll0000000000000
    0.15 mm-0.0075 mm to 0.0075 mmFull HardMaterial CertificatePaperASTM A666Roll0000000000000
    0.2 mm-0.01 mm to 0.01 mmFull HardMaterial CertificatePaperASTM A666Roll0000000000000
    0.25 mm-0.0125 mm to 0.0125 mmFull HardMaterial CertificatePaperASTM A666Roll0000000000000
    0.3 mm-0.015 mm to 0.015 mmFull HardMaterial CertificatePaperASTM A666Roll0000000000000
    0.4 mm-0.02 mm to 0.02 mmFull HardMaterial CertificatePaperASTM A666Roll0000000000000
    0.5 mm-0.025 mm to 0.025 mmFull HardMaterial CertificatePaperASTM A666Roll0000000000000
    0.65 mm-0.0325 mm to 0.0325 mmFull HardMaterial CertificatePaperASTM A666Roll0000000000000
    0.8 mm-0.04 mm to 0.04 mmFull HardMaterial CertificatePaperASTM A666Roll0000000000000
     
    Super-Corrosion-Resistant 316 Stainless Steel
     
    6" Wide × 12" Long
    0.002"-0.0001" to 0.0001"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Sheet000000000000
    0.003"-0.00015" to 0.00015"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Sheet000000000000
    0.005"-0.00025" to 0.00025"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Sheet0000000000000
    0.01"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Sheet0000000000000
    0.02"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Sheet0000000000000
     
    6" Wide × 25" Long
    0.001"-0.0001" to 0.0001"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Sheet0000000000000
    0.002"-0.0001" to 0.0001"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Sheet0000000000000
    0.003"-0.00015" to 0.00015"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Sheet0000000000000
    0.004"-0.0002" to 0.0002"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Sheet0000000000000
    0.005"-0.00025" to 0.00025"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Sheet0000000000000
    0.01"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Sheet0000000000000
    0.015"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Sheet0000000000000
    0.02"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Sheet0000000000000
    0.025"-0.0008" to 0.0008"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Sheet0000000000000
     
    6" Wide × 50" Long
    0.001"-0.0001" to 0.0001"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Roll0000000000000
    0.002"-0.0001" to 0.0001"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll0000000000000
    0.003"-0.00015" to 0.00015"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll0000000000000
    0.004"-0.0002" to 0.0002"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll0000000000000
    0.005"-0.00025" to 0.00025"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll0000000000000
    0.006"-0.0003" to 0.0003"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Roll0000000000000
    0.007"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll0000000000000
    0.008"-0.0004" to 0.0004"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Roll0000000000000
    0.01"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll0000000000000
    0.012"-0.0006" to 0.0006"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Roll0000000000000
    0.015"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll0000000000000
    0.02"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll0000000000000
    0.025"-0.0008" to 0.0008"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll0000000000000
    0.031"-0.0008" to 0.0008"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll0000000000000
     
    6" Wide × 60" Long
    0.005"-0.00025" to 0.00025"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Roll0000000000000
    0.01"-0.0005" to 0.0005"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Roll0000000000000
     
    6" Wide × 100" Long
    0.001"-0.00005" to 0.00005"Material CertificatePaperASTM A666, SAE AMS5507, SAE AMS5524Roll0000000000000
    0.002"-0.0001" to 0.0001"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll0000000000000
    0.003"-0.00015" to 0.00015"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll0000000000000
    0.004"-0.0002" to 0.0002"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll0000000000000
    0.005"-0.00025" to 0.00025"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll0000000000000
    0.007"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll0000000000000
    0.008"-0.0004" to 0.0004"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Roll0000000000000
    0.01"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll0000000000000
    0.012"-0.0006" to 0.0006"Material CertificatePaperASTM A666, SAE AMS5507, SAE AMS5524Roll00000000000000
    0.015"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll00000000000000
    0.02"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll00000000000000
    0.025"-0.0008" to 0.0008"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll00000000000000
    0.031"-0.00155" to 0.00155"Material CertificatePaperASTM A666, SAE AMS5507, SAE AMS5524Roll00000000000000
     
    8" Wide × 12" Long
    0.001"-0.00008" to 0.00008"Material CertificatePaperSAE AMS5524Sheet000000000000
    0.002"-0.0001" to 0.0001"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Sheet000000000000
    0.003"-0.00015" to 0.00015"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Sheet000000000000
    0.004"-0.0002" to 0.0002"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Sheet000000000000
    0.005"-0.00025" to 0.00025"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Sheet000000000000
    0.006"-0.0003" to 0.0003"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Sheet000000000000
    0.007"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Sheet000000000000
    0.008"-0.0004" to 0.0004"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Sheet000000000000
    0.01"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Sheet000000000000
    0.012"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Sheet000000000000
    0.015"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Sheet000000000000
    0.02"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Sheet000000000000
    0.025"-0.001" to 0.001"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Sheet000000000000
    0.031"-0.001" to 0.001"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Sheet000000000000
     
    10" Wide × 12" Long
    0.001"-0.0001" to 0.0001"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Sheet0000000000000
    0.002"-0.0001" to 0.0001"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Sheet0000000000000
    0.003"-0.00015" to 0.00015"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Sheet0000000000000
    0.004"-0.0002" to 0.0002"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Sheet0000000000000
    0.005"-0.00025" to 0.00025"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Sheet0000000000000
    0.01"-0.0005" to 0.0005"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Sheet0000000000000
    0.015"-0.0009" to 0.0009"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Sheet0000000000000
    0.02"-0.001" to 0.001"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Sheet0000000000000
     
    12" Wide × 12" Long
    0.001"-0.0001" to 0.0001"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Sheet0000000000000
    0.002"-0.0001" to 0.0001"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Sheet0000000000000
    0.003"-0.00015" to 0.00015"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Sheet0000000000000
    0.004"-0.00025" to 0.00025"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Sheet0000000000000
    0.005"-0.00025" to 0.00025"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Sheet0000000000000
    0.01"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Sheet0000000000000
    0.015"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Sheet0000000000000
    0.02"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Sheet0000000000000
     
    12" Wide × 24" Long
    0.001"-0.0001" to 0.0001"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Sheet0000000000000
    0.002"-0.0001" to 0.0001"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Sheet0000000000000
    0.003"-0.00015" to 0.00015"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Sheet0000000000000
    0.004"-0.00025" to 0.00025"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Sheet0000000000000
    0.005"-0.00025" to 0.00025"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Sheet0000000000000
    0.01"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Sheet0000000000000
    0.015"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Sheet0000000000000
    0.02"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Sheet0000000000000
    0.025"-0.00125" to 0.00125"Material CertificatePaperASTM A666, SAE AMS5507, SAE AMS5524Sheet00000000000000
     
    12" Wide × 50" Long
    0.001"-0.0001" to 0.0001"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Roll0000000000000
    0.002"-0.0001" to 0.0001"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll0000000000000
    0.003"-0.00015" to 0.00015"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll0000000000000
    0.004"-0.0002" to 0.0002"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll0000000000000
    0.005"-0.00025" to 0.00025"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll0000000000000
    0.007"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll0000000000000
    0.008"-0.0004" to 0.0004"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Roll0000000000000
    0.01"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll0000000000000
    0.012"-0.0006" to 0.0006"Material CertificatePaperASTM A666, SAE AMS5507, SAE AMS5524Roll00000000000000
    0.015"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll00000000000000
    0.02"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll00000000000000
    0.025"-0.0008" to 0.0008"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll00000000000000
     
    12" Wide × 100" Long
    0.002"-0.0001" to 0.0001"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll0000000000000
    0.003"-0.00015" to 0.00015"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll00000000000000
    0.004"-0.0002" to 0.0002"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll00000000000000
    0.005"-0.00025" to 0.00025"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll00000000000000
    0.007"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll00000000000000
    0.01"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll00000000000000
    0.015"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll00000000000000
    0.02"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll00000000000000
    0.025"-0.0008" to 0.0008"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll00000000000000
     
    12" Wide × 120" Long
    0.001"-0.0001" to 0.0001"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Roll0000000000000
    0.002"-0.0001" to 0.0001"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Roll0000000000000
    0.003"-0.00015" to 0.00015"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Roll00000000000000
    0.004"-0.0002" to 0.0002"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Roll00000000000000
    0.005"-0.00025" to 0.00025"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Roll00000000000000
    0.008"-0.0004" to 0.0004"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Roll00000000000000
    0.01"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll00000000000000
    0.012"-0.0006" to 0.0006"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Roll00000000000000
    0.015"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll00000000000000
    0.02"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll00000000000000
    0.025"-0.0008" to 0.0008"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll00000000000000
     
    24" Wide × 24" Long
    0.002"-0.0001" to 0.0001"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Sheet000000000000
    0.003"-0.00015" to 0.00015"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Sheet000000000000
    0.004"-0.0002" to 0.0002"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Sheet000000000000
    0.005"-0.00025" to 0.00025"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Sheet000000000000
    0.006"-0.0003" to 0.0003"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Sheet000000000000
    0.007"-0.0005" to 0.0005"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Sheet000000000000
    0.008"-0.0004" to 0.0004"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Sheet0000000000000
    0.01"-0.0005" to 0.0005"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Sheet0000000000000
    0.012"-0.0005" to 0.0005"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Sheet0000000000000
    0.015"-0.0005" to 0.0005"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Sheet0000000000000
    0.02"-0.0005" to 0.0005"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Sheet0000000000000
    0.025"-0.00125" to 0.00125"Material CertificatePaperASTM A666, SAE AMS5507, SAE AMS5524Sheet00000000000000
     
    24" Wide × 50" Long
    0.002"-0.0001" to 0.0001"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll0000000000000
    0.003"-0.00015" to 0.00015"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll00000000000000
    0.004"-0.0002" to 0.0002"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll00000000000000
    0.005"-0.00025" to 0.00025"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Sheet00000000000000
    0.005"-0.00025" to 0.00025"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll00000000000000
    0.007"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll00000000000000
    0.01"-0.0005" to 0.0005"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Sheet00000000000000
    0.01"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll00000000000000
    0.015"-0.00075" to 0.00075"Material CertificatePaperASTM A666, SAE AMS5507, SAE AMS5524Sheet00000000000000
    0.015"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll00000000000000
    0.02"-0.001" to 0.001"Material CertificatePaperASTM A666, SAE AMS5507, SAE AMS5524Sheet00000000000000
    0.02"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll00000000000000
    0.025"-0.0008" to 0.0008"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll00000000000000
     
    24" Wide × 100" Long
    0.002"-0.0001" to 0.0001"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll00000000000000
    0.003"-0.00015" to 0.00015"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll00000000000000
    0.004"-0.0002" to 0.0002"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll00000000000000
    0.005"-0.00025" to 0.00025"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll00000000000000
    0.007"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll00000000000000
    0.01"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll00000000000000
    0.015"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll00000000000000
    0.02"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll00000000000000
    0.025"-0.0008" to 0.0008"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Roll00000000000000
     
    High-Strength 17-7 PH Stainless Steel
     
    6" Wide × 50" Long
    0.003"-0.00015" to 0.00015"Full HardMaterial CertificatePaperASTM A693Roll000000000000
    0.004"-0.0002" to 0.0002"Full HardMaterial CertificatePaperASTM A693Roll000000000000
    0.005"-0.00025" to 0.00025"Full HardMaterial CertificatePaperASTM A693Roll000000000000
    0.006"-0.0003" to 0.0003"Full HardMaterial CertificatePaperASTM A693Roll000000000000
    0.007"-0.00035" to 0.00035"Full HardMaterial CertificatePaperASTM A693Roll000000000000
    0.008"-0.0004" to 0.0004"Full HardMaterial CertificatePaperASTM A693Roll000000000000
    0.01"-0.0005" to 0.0005"Full HardMaterial CertificatePaperASTM A693Roll000000000000
    0.012"-0.0006" to 0.0006"Full HardMaterial CertificatePaperASTM A693Roll000000000000
    0.015"-0.00075" to 0.00075"Full HardMaterial CertificatePaperASTM A693Roll000000000000
    0.02"-0.001" to 0.001"Full HardMaterial CertificatePaperASTM A693Roll000000000000
    0.025"-0.00125" to 0.00125"Full HardMaterial CertificatePaperASTM A693Roll000000000000
    0.031"-0.00155" to 0.00155"Full HardMaterial CertificatePaperASTM A693Roll000000000000
     
    Extreme-Strength 17-4 PH Stainless Steel
     
    4" Wide × 60" Long
    0.003"-0.00015" to 0.00015"Material CertificatePaperASTM A693Roll0000000000000
    0.004"-0.0002" to 0.0002"Material CertificatePaperASTM A693Roll0000000000000
    0.005"-0.00025" to 0.00025"Material CertificatePaperASTM A693Roll0000000000000
    0.006"-0.0003" to 0.0003"Material CertificatePaperASTM A693Roll0000000000000
    0.008"-0.0004" to 0.0004"Material CertificatePaperASTM A693Roll0000000000000
    0.01"-0.0005" to 0.0005"Material CertificatePaperASTM A693Roll0000000000000
    0.012"-0.0006" to 0.0006"Material CertificatePaperASTM A693Roll0000000000000
    0.015"-0.0009" to 0.0009"Material CertificatePaperASTM A693Roll0000000000000
    0.018"-0.001" to 0.001"Material CertificatePaperASTM A693Roll0000000000000
    0.02"-0.001" to 0.001"Material CertificatePaperASTM A693Roll0000000000000
    0.025"-0.001" to 0.001"Material CertificatePaperASTM A693Roll0000000000000
    0.031"-0.001" to 0.001"Material CertificatePaperASTM A693Roll0000000000000
     

    Shim Stock Assortments

    When you don’t know the exact shim thickness you’ll need, keep shim stock in multiple thicknesses on hand so you always have the right one. Cut this shim stock into custom shapes to create shims that suit your needs. With thickness tolerances as fine as a strand of hair, the shims will precisely align, space, and level components on dies, presses, and machinery.
    You can stack multiple shims to achieve your exact thickness, but stacking more than four may cause them to shift. Remember, fewer shims are better, so a couple of thicker shims are more stable than a bunch of thin shims.
    Shim Stock
    Image of Product. Front orientation. Shim Stock. Sold as Assortments.
    18-8 Stainless Steel—The choice for wet and outdoor areas because it resists rust. However, it will corrode or pit when exposed to salt water and chemicals.
    Super-Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, it won't degrade when exposed to harsh weather, salt water, and most chemicals.
    Sheets—Shim stock comes in sheets that are flat packed.
    No. of
    Pieces
    Includes
    Wd.
    Lg.
    Specs. Met
    Form
    Each
    18-8 Stainless Steel
    10One 0.001" thick (±0.0001") sheet
    One 0.002" thick (±0.0001") sheet
    One 0.003" thick (±0.00015") sheet
    One 0.004" thick (±0.0002") sheet
    One 0.005" thick (±0.00025") sheet
    One 0.007" thick (±0.00035") sheet
    One 0.01" thick (±0.0005") sheet
    One 0.012" thick (±0.0006") sheet
    One 0.015" thick (±0.0009") sheet
    One 0.02" thick (±0.001") sheet
    8"12"ASTM A666, SAE AMS5906, SAE AMS5913Sheet000000000000
    12One 0.001" thick (±0.0001") sheet
    One 0.0015" thick (±0.0001") sheet
    One 0.002" thick (±0.0001") sheet
    One 0.003" thick (±0.00015") sheet
    One 0.004" thick (±0.0002") sheet
    One 0.005" thick (±0.00025") sheet
    One 0.006" thick (±0.0003") sheet
    One 0.007" thick (±0.00035") sheet
    One 0.008" thick (±0.0004") sheet
    One 0.01" thick (±0.0005") sheet
    One 0.012" thick (±0.0006") sheet
    One 0.015" thick (±0.0009") sheet
    6"12"ASTM A666, SAE AMS5906, SAE AMS5913Sheet00000000000
    20Two 0.001" thick (±0.0001") sheets
    Two 0.002" thick (±0.0001") sheets
    Two 0.003" thick (±0.00015") sheets
    Two 0.004" thick (±0.0002") sheets
    Two 0.005" thick (±0.00025") sheets
    Two 0.007" thick (±0.00035") sheets
    Two 0.01" thick (±0.0005") sheets
    Two 0.012" thick (±0.0006") sheets
    Two 0.015" thick (±0.0009") sheets
    Two 0.02" thick (±0.001") sheets
    8"12"ASTM A666, SAE AMS5906, SAE AMS5913Sheet00000000000000
    24Two 0.001" thick (±0.0001") sheets
    Two 0.002" thick (±0.0001") sheets
    Two 0.003" thick (±0.00015") sheets
    Two 0.004" thick (±0.0002") sheets
    Two 0.005" thick (±0.00025") sheets
    Two 0.007" thick (±0.00035") sheets
    Two 0.01" thick (±0.0005") sheets
    Two 0.012" thick (±0.0006") sheets
    Two 0.015" thick (±0.0009") sheets
    Two 0.02" thick (±0.001") sheets
    Two 0.025" thick (±0.001") sheets
    Two 0.031" thick (±0.001") sheets
    6"12"ASTM A666, SAE AMS5906, SAE AMS5913Sheet00000000000000
     
    Super-Corrosion-Resistant 316 Stainless Steel
    12One 0.001” thick (±0.0002") sheet
    One 0.002" thick (±0.0002") sheet
    One 0.003" thick (±0.0002") sheet
    One 0.004" thick (±0.0002") sheet
    One 0.005" thick (±0.0002") sheet
    One 0.007" thick (±0.0002") sheet
    One 0.01" thick (±0.0005") sheet
    One 0.012" thick (±0.0005") sheet
    One 0.015" thick (±0.0005") sheet
    One 0.02" thick (±0.0007") sheet
    One 0.025" thick (±0.0007") sheet
    One 0.031" thick (±0.0009") sheet
    6"12"ASTM A240, ASTM A666Sheet0000000000000
    24Two 0.001” thick (±0.0002") sheets
    Two 0.002" thick (±0.0002") sheets
    Two 0.003” thick (±0.0002") sheets
    Two 0.004” thick (±0.0002") sheets
    Two 0.005” thick (±0.0002") sheets
    Two 0.007” thick (±0.0002") sheets
    Two 0.01" thick (±0.0005") sheets
    Two 0.012" thick (±0.0005") sheets
    Two 0.015" thick (±0.0005") sheets
    Two 0.02" thick (±0.0007") sheets
    Two 0.025" thick (±0.0007") sheets
    Two 0.031" thick (±0.0009") sheets
    6"12"ASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Sheet000000000000
     
    Shim Stock with Metal Cabinet
    Image of Product. Front orientation. Shim Stock. Sold as Assortments, Shim Stock with Metal Cabinet.
    This shim stock comes in a spacious keyed-lock steel cabinet that can also be used to store your own tools and supplies.
    Sheets—Shim stock comes in sheets that are flat packed.
    No. of
    Pieces
    Includes
    Wd.
    Lg.
    Form
    Each
    5918-8 Stainless Steel—Hardened: 0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.01", 0.012", 0.015"
    1010 Low-Carbon Steel—Hardened: 0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.01", 0.012", 0.015"
    1095 Spring Steel—Hardened: 0.005", 0.01", 0.015", 0.02", 0.025", 0.032"
    1100 Aluminum—Hardened: 0.001", 0.002", 0.003", 0.005"
    260 Brass—Hardened: 0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.01", 0.012", 0.015"
    510 Bronze—Spring-Tempered: 0.005", 0.008", 0.01", 0.013", 0.016", 0.02", 0.025", 0.032"
    110 Copper—Softened: 0.005", 0.01", 0.015", 0.02", 0.025"
    6"12"Sheet, Roll00000000000000
     

    Adhesive-Back Shim Stock

    Image of Product. Front orientation. Shim Stock. Adhesive-Back Shim Stock.
    Stick with confidence—a durable adhesive keeps this shim stock from sliding out of place. Cut the shim stock into custom shapes to create shims that suit your needs. With thickness tolerances as fine as a strand of hair, the shims will precisely align, space, and level components on dies, presses, and machinery.
    Sheets—Shim stock comes in sheets that are flat packed.
    18-8 Stainless Steel—The choice for wet and outdoor areas because it resists rust. However, it will corrode or pit when exposed to salt water and chemicals.
    Super-Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, it won't degrade when exposed to harsh weather, salt water, and most chemicals.
    Temper Rating—Choose half hard to create shims that you’ll need to bend or shape. Opt for full hard to make stronger shims that will maintain their shape under loads.
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Certificate
    Thk.
    Thk. Tolerance
    Material
    Thk.
    Adhesive
    Thk.
    Adhesive
    Type
    Temper
    Rating
    Type
    Form
    Specs.
    Met
    Form
    Each
    18-8 Stainless Steel
     
    8" Wide × 12" Long
    0.003"-0.00005" to 0.00005"0.001"0.002"AcrylicFull HardMaterial CertificateDigitalASTM A666Sheet0000000000000
    0.004"-0.0001" to 0.0001"0.002"0.002"AcrylicFull HardMaterial CertificateDigitalASTM A666Sheet0000000000000
    0.005"-0.00015" to 0.00015"0.003"0.002"AcrylicFull HardMaterial CertificateDigitalASTM A666Sheet0000000000000
    0.006"-0.002" to 0.002"0.004"0.002"AcrylicFull HardMaterial CertificateDigitalASTM A666Sheet0000000000000
    0.007"-0.00025" to 0.00025"0.005"0.002"AcrylicFull HardMaterial CertificateDigitalASTM A666Sheet0000000000000
    0.008"-0.0003" to 0.0003"0.006"0.002"AcrylicFull HardMaterial CertificateDigitalASTM A666Sheet0000000000000
    0.009"-0.00035" to 0.00035"0.007"0.002"AcrylicFull HardMaterial CertificateDigitalASTM A666Sheet0000000000000
    0.01"-0.0004" to 0.0004"0.008"0.002"AcrylicFull HardMaterial CertificateDigitalASTM A666Sheet0000000000000
    0.011"-0.00045" to 0.00045"0.009"0.002"AcrylicFull HardMaterial CertificateDigitalASTM A666Sheet0000000000000
    0.012"-0.0005" to 0.0005"0.01"0.002"AcrylicFull HardMaterial CertificateDigitalASTM A666Sheet0000000000000
    0.014"-0.0006" to 0.0006"0.012"0.002"AcrylicFull HardMaterial CertificateDigitalASTM A666Sheet000000000000
    0.017"-0.0009" to 0.0009"0.015"0.002"AcrylicFull HardMaterial CertificateDigitalASTM A666Sheet0000000000000
    0.022"-0.001" to 0.001"0.02"0.002"AcrylicFull HardMaterial CertificateDigitalASTM A666Sheet0000000000000
    0.027"-0.001" to 0.001"0.025"0.002"AcrylicFull HardMaterial CertificateDigitalASTM A666Sheet0000000000000
    0.033"-0.001" to 0.001"0.031"0.002"AcrylicFull HardMaterial CertificateDigitalASTM A666Sheet0000000000000
     
    Super-Corrosion-Resistant 316 Stainless Steel
     
    8" Wide × 12" Long
    0.004"-0.0001" to 0.0001"0.002"0.002"AcrylicMaterial CertificateDigitalASTM A666Sheet0000000000000
    0.005"-0.00015" to 0.00015"0.003"0.002"AcrylicMaterial CertificateDigitalASTM A666Sheet0000000000000
    0.006"-0.0002" to 0.0002"0.004"0.002"AcrylicMaterial CertificateDigitalASTM A666Sheet0000000000000
    0.007"-0.00025" to 0.00025"0.005"0.002"AcrylicMaterial CertificateDigitalASTM A666Sheet0000000000000
    0.008"-0.0003" to 0.0003"0.006"0.002"AcrylicMaterial CertificateDigitalASTM A666Sheet0000000000000
    0.009"-0.00035" to 0.00035"0.007"0.002"AcrylicMaterial CertificateDigitalASTM A666Sheet0000000000000
    0.01"-0.0004" to 0.0004"0.008"0.002"AcrylicMaterial CertificateDigitalASTM A666Sheet0000000000000
    0.012"-0.0005" to 0.0005"0.01"0.002"AcrylicMaterial CertificateDigitalASTM A666Sheet0000000000000
    0.014"-0.0006" to 0.0006"0.012"0.002"AcrylicMaterial CertificateDigitalASTM A666Sheet0000000000000
    0.017"-0.001" to 0.001"0.015"0.002"AcrylicMaterial CertificateDigitalASTM A666Sheet0000000000000
    0.022"-0.001" to 0.001"0.02"0.002"AcrylicMaterial CertificateDigitalASTM A666Sheet0000000000000
    0.027"-0.001" to 0.001"0.025"0.002"AcrylicMaterial CertificateDigitalASTM A666Sheet0000000000000
    0.033"-0.001" to 0.001"0.031"0.002"AcrylicMaterial CertificateDigitalASTM A666Sheet0000000000000
     

    Peel-Away Multilayer Shim Stock

    Image of ProductInUse. Front orientation. Shim Stock. Peel Away, Sold Individually, Multilayer.
    Fine-tune thickness without worrying about stacking multiple shims. Cut the shim stock into custom shapes that suit your needs. It's made of metal layers bonded with adhesive—peel off the layers with a utility knife until you reach your desired thickness. To make peeling easier, warm the created shims to soften the adhesive. With thickness tolerances as fine as a strand of hair, the shims will precisely align, space, and level components on dies, presses, and machinery.
    18-8 Stainless Steel—The choice for wet and outdoor areas because it resists rust. However, it will corrode or pit when exposed to salt water and chemicals.
    Thk.
    Thk. Tolerance
    No. of
    Layers
    Layer
    Thk.
    Specs. Met
    Form
    Each
    18-8 Stainless Steel
     
    12" Wide × 12" Long
    0.008"-0.0005" to 0.001"40.002"SAE AMS-DTL-22499Sheet0000000000000
    0.01"-0.0005" to 0.0015"50.002"SAE AMS-DTL-22499Sheet000000000000
    0.015"-0.001" to 0.0015"50.003"SAE AMS-DTL-22499Sheet000000000000
    0.016"-0.001" to 0.0015"80.002"SAE AMS-DTL-22499Sheet000000000000
    0.02"-0.001" to 0.002"90.002"SAE AMS-DTL-22499Sheet000000000000
    0.021"-0.001" to 0.002"60.003"SAE AMS-DTL-22499Sheet000000000000
    0.032"-0.002" to 0.003"150.002"SAE AMS-DTL-22499Sheet000000000000
    0.033"-0.002" to 0.003"100.003"SAE AMS-DTL-22499Sheet000000000000
    0.048"-0.002" to 0.005"150.003"SAE AMS-DTL-22499Sheet0000000000000
    0.048"-0.002" to 0.005"220.002"SAE AMS-DTL-22499Sheet0000000000000
    0.062"-0.002" to 0.006"280.002"SAE AMS-DTL-22499Sheet0000000000000
    0.063"-0.002" to 0.006"190.003"SAE AMS-DTL-22499Sheet0000000000000
    0.093"-0.003" to 0.009"280.003"SAE AMS-DTL-22499Sheet0000000000000
    0.094"-0.003" to 0.009"430.002"SAE AMS-DTL-22499Sheet0000000000000
    0.124"-0.003" to 0.012"560.002"SAE AMS-DTL-22499Sheet0000000000000
    0.126"-0.003" to 0.012"380.003"SAE AMS-DTL-22499Sheet0000000000000
     
    20" Wide × 24" Long
    0.008"-0.0005" to 0.001"40.002"SAE AMS-DTL-22499Sheet000000000000
    0.01"-0.0005" to 0.0015"50.002"SAE AMS-DTL-22499Sheet0000000000000
    0.015"-0.001" to 0.0015"50.003"SAE AMS-DTL-22499Sheet0000000000000
    0.016"-0.001" to 0.0015"80.002"SAE AMS-DTL-22499Sheet0000000000000
    0.02"-0.001" to 0.002"90.002"SAE AMS-DTL-22499Sheet0000000000000
    0.021"-0.001" to 0.002"60.003"SAE AMS-DTL-22499Sheet0000000000000
    0.032"-0.002" to 0.003"150.002"SAE AMS-DTL-22499Sheet0000000000000
    0.033"-0.002" to 0.003"100.003"SAE AMS-DTL-22499Sheet0000000000000
    0.048"-0.002" to 0.005"150.003"SAE AMS-DTL-22499Sheet0000000000000
    0.048"-0.002" to 0.005"220.002"SAE AMS-DTL-22499Sheet0000000000000
    0.062"-0.002" to 0.006"280.002"SAE AMS-DTL-22499Sheet0000000000000
    0.063"-0.002" to 0.006"190.003"SAE AMS-DTL-22499Sheet0000000000000
    0.093"-0.003" to 0.009"280.003"SAE AMS-DTL-22499Sheet0000000000000
    0.094"-0.003" to 0.009"430.002"SAE AMS-DTL-22499Sheet0000000000000
    0.124"-0.003" to 0.012"560.002"SAE AMS-DTL-22499Sheet0000000000000
    0.126"-0.003" to 0.012"380.003"SAE AMS-DTL-22499Sheet0000000000000
     

    Tape-Style Shim Stock

    Image of Product. Front orientation. Shim Stock. Tape-Style Shim Stock.
    Unroll to your desired length, cut into custom shapes, and stick in place. With thickness tolerances as fine as a strand of hair, the shims you create will precisely align, space, and level components on dies, presses, and machinery.
    18-8 Stainless Steel—The choice for wet and outdoor areas because it resists rust. However, it will corrode or pit when exposed to salt water and chemicals.
    Wd.
    Lg.,
    ft.
    Thk.
    Thk. Tolerance
    Material
    Thk.
    Adhesive
    Type
    Adhesive
    Thk.
    Each
    18-8 Stainless Steel
    1/4"90.004"-0.0004" to 0.0004"0.002"Acrylic0.002"000000000000
    3/8"90.004"-0.0004" to 0.0004"0.002"Acrylic0.002"000000000000
    1/2"90.004"-0.0004" to 0.0004"0.002"Acrylic0.002"00000000000
    5/8"90.004"-0.0004" to 0.0004"0.002"Acrylic0.002"0000000000000
    3/4"90.004"-0.0004" to 0.0004"0.002"Acrylic0.002"000000000000
    1"90.004"-0.0004" to 0.0004"0.002"Acrylic0.002"000000000000
    1 1/2"90.004"-0.0004" to 0.0004"0.002"Acrylic0.002"000000000000
    2"90.004"-0.0004" to 0.0004"0.002"Acrylic0.002"000000000000
    3"90.004"-0.0004" to 0.0004"0.002"Acrylic0.002"000000000000
     
    back to top