Metal Panels
Close off openings in structures while allowing air to pass through.
For technical drawings and 3-D models, click on a part number.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/rai/raised-sheet-medium-j01-p1master--8559090c6161572532533-p9@halfx_637081113690506058.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/rai/raised-sheet-medium-j01-p2-master1570138904-p9@halfx_637057335156731559.png?ver=imagenotfound)
Expanded panels are more rigid than perforated panels and are for use when structural stability is important. They can be formed and welded; however, they are more difficult to cut than perforated panels. Raised panels have strands that overlap to provide a skid-resistant surface. Use them to create safety guards for equipment and machinery.
304 stainless steel is more corrosion resistant than galvanized steel. It also has good chemical resistance.
Opening | Strand | |||||
---|---|---|---|---|---|---|
Overall Thick. | Wd. | Lg. | Wd. | Thick. | Each | |
12" × 12" | ||||||
304 Stainless Steel | ||||||
0.178" | 0.94" | 0.38" | 0.087" | 0.048" | 0000000 | 000000 |
0.183" | 0.94" | 0.37" | 0.087" | 0.06" | 0000000 | 00000 |
0.217" | 1.76" | 0.78" | 0.106" | 0.06" | 0000000 | 00000 |
0.232" | 1.69" | 0.75" | 0.107" | 0.09" | 0000000 | 00000 |
0.234" | 2.75" | 1.18" | 0.115" | 0.06" | 0000000 | 00000 |
0.246" | 2.63" | 1.15" | 0.115" | 0.09" | 0000000 | 00000 |
24" × 24" | ||||||
304 Stainless Steel | ||||||
0.178" | 0.94" | 0.38" | 0.087" | 0.048" | 0000000 | 00000 |
0.183" | 0.94" | 0.37" | 0.087" | 0.06" | 0000000 | 00000 |
0.217" | 1.76" | 0.78" | 0.106" | 0.06" | 0000000 | 00000 |
0.232" | 1.69" | 0.75" | 0.107" | 0.09" | 0000000 | 00000 |
0.234" | 2.75" | 1.18" | 0.115" | 0.06" | 0000000 | 00000 |
0.246" | 2.63" | 1.15" | 0.115" | 0.09" | 0000000 | 00000 |
48" × 48" | ||||||
304 Stainless Steel | ||||||
0.178" | 0.94" | 0.38" | 0.087" | 0.048" | 0000000 | 000000 |
0.183" | 0.94" | 0.37" | 0.087" | 0.06" | 0000000 | 000000 |
0.217" | 1.76" | 0.78" | 0.106" | 0.06" | 0000000 | 000000 |
0.232" | 1.69" | 0.75" | 0.107" | 0.09" | 0000000 | 000000 |
0.234" | 2.75" | 1.18" | 0.115" | 0.06" | 0000000 | 000000 |
0.246" | 2.63" | 1.15" | 0.115" | 0.09" | 0000000 | 000000 |
48" × 96" | ||||||
304 Stainless Steel | ||||||
0.178" | 0.94" | 0.38" | 0.087" | 0.048" | 0000000 | 000000 |
0.183" | 0.94" | 0.37" | 0.087" | 0.06" | 0000000 | 000000 |
0.217" | 1.76" | 0.78" | 0.106" | 0.06" | 0000000 | 000000 |
0.232" | 1.69" | 0.75" | 0.107" | 0.09" | 0000000 | 000000 |
0.234" | 2.75" | 1.18" | 0.115" | 0.06" | 0000000 | 000000 |
0.246" | 2.63" | 1.15" | 0.115" | 0.09" | 0000000 | 000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/i19/i193-flattened-sheet-medium-j01--794caf88d161610982311-p9@halfx_637465575233476191.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/i10/i101-flattened-sheet-medium-j01-p2-master1607631268-p9@halfx_637432067490843651.png?ver=imagenotfound)
Expanded panels are more rigid than perforated panels and are for use when structural stability is important. They can be formed and welded; however, they are more difficult to cut than perforated panels. Flattened panels begin as raised panels, then they're rolled to a smooth and flat finish. Use them to create protective enclosures, shelving, grilles, and baskets.
304 stainless steel is more corrosion resistant than galvanized steel. It also has good chemical resistance.
316 stainless steel has excellent resistance to chemicals and salt water.
Opening | Strand | |||||
---|---|---|---|---|---|---|
Overall Thick. | Wd. | Lg. | Wd. | Thick. | Each | |
12" × 12" | ||||||
304 Stainless Steel | ||||||
0.041" | 1" | 0.3" | 0.098" | 0.041" | 0000000 | 000000 |
0.051" | 1" | 0.3" | 0.099" | 0.051" | 0000000 | 00000 |
0.051" | 1.81" | 0.69" | 0.118" | 0.051" | 0000000 | 00000 |
0.051" | 2.75" | 1.07" | 0.128" | 0.051" | 0000000 | 00000 |
0.076" | 1.75" | 0.68" | 0.12" | 0.076" | 0000000 | 00000 |
0.076" | 2.63" | 1.07" | 0.13" | 0.076" | 0000000 | 00000 |
0.114" | 1.69" | 0.59" | 0.179" | 0.114" | 0000000 | 00000 |
316 Stainless Steel | ||||||
0.041" | 1" | 0.3" | 0.098" | 0.041" | 0000000 | 00000 |
0.051" | 1" | 0.3" | 0.099" | 0.051" | 0000000 | 00000 |
0.076" | 1.75" | 0.68" | 0.12" | 0.076" | 0000000 | 00000 |
24" × 24" | ||||||
304 Stainless Steel | ||||||
0.041" | 1" | 0.3" | 0.098" | 0.041" | 0000000 | 00000 |
0.051" | 1" | 0.3" | 0.099" | 0.051" | 0000000 | 00000 |
0.051" | 1.81" | 0.69" | 0.118" | 0.051" | 0000000 | 00000 |
0.051" | 2.75" | 1.07" | 0.128" | 0.051" | 0000000 | 00000 |
0.076" | 1.75" | 0.68" | 0.12" | 0.076" | 0000000 | 00000 |
0.076" | 2.63" | 1.07" | 0.13" | 0.076" | 0000000 | 00000 |
0.114" | 1.69" | 0.59" | 0.179" | 0.114" | 0000000 | 000000 |
316 Stainless Steel | ||||||
0.041" | 1" | 0.3" | 0.098" | 0.041" | 0000000 | 00000 |
0.051" | 1" | 0.3" | 0.099" | 0.051" | 0000000 | 00000 |
0.076" | 1.75" | 0.68" | 0.12" | 0.076" | 0000000 | 00000 |
48" × 48" | ||||||
304 Stainless Steel | ||||||
0.041" | 1" | 0.3" | 0.098" | 0.041" | 0000000 | 000000 |
0.051" | 1" | 0.3" | 0.099" | 0.051" | 0000000 | 000000 |
0.051" | 1.81" | 0.69" | 0.118" | 0.051" | 0000000 | 000000 |
0.051" | 2.75" | 1.07" | 0.128" | 0.051" | 0000000 | 000000 |
0.076" | 1.75" | 0.68" | 0.12" | 0.076" | 0000000 | 000000 |
0.076" | 2.63" | 1.07" | 0.13" | 0.076" | 0000000 | 000000 |
0.114" | 1.69" | 0.59" | 0.179" | 0.114" | 0000000 | 000000 |
316 Stainless Steel | ||||||
0.041" | 1" | 0.3" | 0.098" | 0.041" | 0000000 | 000000 |
0.051" | 1" | 0.3" | 0.099" | 0.051" | 0000000 | 000000 |
0.076" | 1.75" | 0.68" | 0.12" | 0.076" | 0000000 | 000000 |
48" × 96" | ||||||
304 Stainless Steel | ||||||
0.041" | 1" | 0.3" | 0.098" | 0.041" | 0000000 | 000000 |
0.051" | 1" | 0.3" | 0.099" | 0.051" | 0000000 | 000000 |
0.051" | 1.81" | 0.69" | 0.118" | 0.051" | 0000000 | 000000 |
0.051" | 2.75" | 1.07" | 0.128" | 0.051" | 0000000 | 000000 |
0.076" | 1.75" | 0.68" | 0.12" | 0.076" | 0000000 | 000000 |
0.076" | 2.63" | 1.07" | 0.13" | 0.076" | 0000000 | 000000 |
0.114" | 1.69" | 0.59" | 0.179" | 0.114" | 0000000 | 000000 |
316 Stainless Steel | ||||||
0.041" | 1" | 0.3" | 0.098" | 0.041" | 0000000 | 000000 |
0.051" | 1" | 0.3" | 0.099" | 0.051" | 0000000 | 000000 |
0.076" | 1.75" | 0.68" | 0.12" | 0.076" | 0000000 | 000000 |
Fasteners for Fiberglass Bar Grating
Secure grating to your support structure.
Style A require a hole in the support structure and secure to the structure with a hex head cap screw (not included).
Style B bridge two bearing bars. Fasteners require a hole in the support structure.
Styles C-F hook onto the support structure and are connected by a bolt to the plate on top of the grating. They tighten from above the grating for easy installation.
For technical drawings and 3-D models, click on a part number.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/701/7010t21p2l1567183285@halfx_637027621399038943.png?ver=imagenotfound)
For Drainage Opening | ||||||||
---|---|---|---|---|---|---|---|---|
Style | For Bearing Bar Ht. | Wd. | Lg. | For Support Structure Thick. | For Screw Dia. | Mounting Hardware Included | Each | |
316 Stainless Steel | ||||||||
A | Any | 1 1/2" | 1 1/2" | Any | 1/4" | No | 0000000 | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/701/7010t71p2l1567180589@halfx_637027594039613011.png?ver=imagenotfound)
For Bearing Bar | For Drainage Opening | ||||||||
---|---|---|---|---|---|---|---|---|---|
Style | Ht. | Center-to-Center Wd. | Wd. | Lg. | For Support Structure Thick. | Overall Ht. | Mounting Hardware Included | Each | |
316 Stainless Steel | |||||||||
B | 1" | __ | 1" | 4" | 1" | 1" | Yes | 0000000 | 000000 |
B | 1" | __ | 1 1/2" | 1 1/2" | 1" | 1" | Yes | 0000000 | 00000 |
B | 1", 1 1/2" | 1 1/2" | __ | __ | 1" | 1" | Yes | 0000000 | 00000 |
B | 1 1/2" | __ | 1 1/2" | 1 1/2" | 1" | 1" | Yes | 0000000 | 00000 |
B | 2" | __ | 2" | 2" | 1" | 1" | Yes | 0000000 | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/701/7010t411p2l1567183037@halfx_637027618641821013.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/701/7010t632p2l1567183310@halfx_637027621686794209.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/701/7010t742p2l1567183070@halfx_637027618744940071.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/701/7010t851p2l1567183103@halfx_637027619293618744.png?ver=imagenotfound)
For Bearing Bar | For Drainage Opening | ||||||||
---|---|---|---|---|---|---|---|---|---|
Style | Ht. | Center-to-Center Wd. | End-to-End Wd. | Wd. | Lg. | For Support Structure Thick. | Mounting Hardware Included | Each | |
316 Stainless Steel | |||||||||
C | 3/4" | __ | __ | 1 1/2" | 1 1/2" | 1/4"-3/4" | Yes | 00000000 | 000000 |
C | 1 1/4" | __ | __ | 1 1/2" | 1 1/2" | 1/4"-3/4" | Yes | 00000000 | 00000 |
C | 1 3/4" | __ | __ | 2" | 2" | 1/4"-3/4" | Yes | 0000000 | 00000 |
D | 3/4" | __ | __ | 1" | __ | 1/4"-3/4" | Yes | 00000000 | 00000 |
D | 1 1/4" | __ | __ | 1" | __ | 1/4"-3/4" | Yes | 00000000 | 00000 |
E | 3/4" | __ | 2 1/4" | __ | __ | 1/4"-3/4" | Yes | 00000000 | 00000 |
E | 1 1/4" | __ | 2 1/4" | __ | __ | 1/4"-3/4" | Yes | 00000000 | 00000 |
F | 3/4" | 3/8"-2 1/4" | __ | __ | __ | 1/4"-3/4" | Yes | 00000000 | 00000 |
F | 1 1/4" | 3/8"-2 1/4" | __ | __ | __ | 1/4"-3/4" | Yes | 00000000 | 00000 |
F | 1 3/4" | 3/8"-2 1/4" | __ | __ | __ | 1/4"-3/4" | Yes | 00000000 | 00000 |
Fasteners for Metal Bar Grating
Secure grating to your support structure.
Swivel locks are easy to install, adjust, and remove—tighten the bolt and the fastener swivels into place.
Saddle clips bridge two bearing bars. Fasteners require a hole in the support structure as well as a threaded stud and hex nut (not included).
C-clips hook onto the support structure and are connected by a bolt to the plate on top of the grating. They tighten from above the grating for easy installation.
For technical drawings and 3-D models, click on a part number.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/622/62285t61p2l1567182969@halfx_637027617776297218.png?ver=imagenotfound)
For Bearing Bar | 304 Stainless Steel | ||||||
---|---|---|---|---|---|---|---|
Ht. | Wd. | Center-to-Center Wd. | For Support Structure Thick. | Mounting Hardware Included | Pkg. Qty. | Pkg. | |
1 3/4" | 1/8"-1/4" | 5/8"-1 3/8" | 1/8"-3/4" | Yes | 1 | 00000000 | 000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/626/6268t26p2l1567183189@halfx_637027620008285276.png?ver=imagenotfound)
For Bearing Bar | Mounting Hole | 304 Stainless Steel | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
Ht. | Wd. | Center-to-Center Wd. | For Support Structure Thick. | Overall Ht. | Lg. | Wd. | Mounting Hardware Included | Pkg. Qty. | Pkg. | |
Any | 5/16" | 1 3/16" | Any | 1/2" | 3/8" | 9/32" | No | 10 | 0000000 | 000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/626/6268t551p2l1567182632@halfx_637027614396471124.png?ver=imagenotfound)
For Bearing Bar | 316 Stainless Steel | ||||||
---|---|---|---|---|---|---|---|
Ht. | Wd. | Center-to-Center Wd. | For Support Structure Thick. | Mounting Hardware Included | Pkg. Qty. | Pkg. | |
1" | 1/4" | 1 3/16" | 1/4"-3/4" | Yes | 1 | 00000000 | 00000 |
1 1/4" | 1/4" | 1 3/16" | 1/4"-3/4" | Yes | 1 | 00000000 | 0000 |
1 1/2" | 1/4" | 1 3/16" | 1/4"-3/4" | Yes | 1 | 00000000 | 0000 |
1 3/4" | 1/4" | 1 3/16" | 1/4"-3/4" | Yes | 1 | 00000000 | 0000 |
2" | 1/4" | 1 3/16" | 1/4"-3/4" | Yes | 1 | 00000000 | 0000 |
Fasteners for Plank Grating
![](/prerenderstable/mvPRE/contents/gfx/imagecache/701/7012t6p2-g01c-digital@halfx_637026240803006456.png?ver=imagenotfound)
Secure grating to your support structure.
For Drainage Opening | |||||||||
---|---|---|---|---|---|---|---|---|---|
For Grating Surface | Material | Wd. | Lg. | For Screw Dia. | Mounting Hardware Included | Pkg. Qty. | Pkg. | ||
B | Serrated | 304 Stainless Steel | 1 1/4" | 3 7/8" | 3/8" | No | 1 | 000000 | 000000 |