We will reply to your message within an hour.
When your application does not require a smooth interior, this tubing is an economical choice.
This tubing has a seamless construction with no weld bead for unrestricted flow and is stronger than welded tubing.
This tubing is made to tighter tolerances than other stainless steel tubing.
This tubing withstands high pressures up to 13,700 psi. It is also known as capillary tubing.
A thin layer of silicon on the interior provides a smooth surface and offers protection against corrosive gases.
Also known as hypodermic or needle tubing, this tubing has thin walls and is made to tight tolerances for use in precision applications.
Bend this wire and it will stay put. It’s frequently used as tying wire and locking wire.
This wire bounces back after bending. It’s often used to construct springs and wire rope.
When bent, this wire will stay in place. It's widely used as tying and locking wire.
Bend this wire and it will stay in place. It's widely used as tying and locking wire.
This wire will spring back after bending. It's often used to make springs and wire rope.
Bend this wire and it will stay in place. It's commonly used as tying and locking wire.
This wire rope provides a good balance of abrasion resistance and flexibility.
More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.
Often used as bracing and guy wires, individual strands are thick solid wire for a stiff construction.
More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys and the stainless steel wire rope withstands outdoor and washdown applications.
This stainless steel wire rope withstands outdoor and washdown applications. The construction of this wire rope provides a good balance of abrasion resistance and flexibility.
This braided wire has a stiff construction for use as bracing and guy wires.
More wires per strand than other wire rope gives this wire rope the flexibility required for repeat bending over drums and pulleys.
Use this wire rope when lifting in areas that are frequently washed down and require a rope that counteracts rotation.
For use in washdown environments, this wire rope has better corrosion resistance than the galvanized steel wire rope.
These springs are more corrosion resistant than standard compression springs.
Made of stainless steel, these springs are more corrosion resistant than steel compression springs.
If you're designing something unique or can't find the exact size spring you need, we'll get it for you.
Install these springs in tight spots. When pushed together, the coils nest within each other.
Made of stainless steel, these springs are more corrosion resistant than steel extension springs.
For specialty applications and connections, these springs have unique end types.
No matter how far you extend them, these springs pull back with the same amount of force.
Clip the end onto a flat surface to install—no fasteners needed. Once installed, these springs pull back with the same amount of force no matter how far you extend them.
Unlike constant-force springs, the farther you pull these, the harder they are to pull. Use them for applications where the load becomes lighter as the spring contracts, such as in automated dispensing machines.
With ends that are connected to form a circle, these garter springs exert strong radial (towards the center) forces from all directions to maintain pressure on shafts or in seals.
Wind these springs to store power, then release them to create rotary motion—similar to winding a wristwatch. Also known as clock springs and power springs.
Made of stainless steel, these springs are more corrosion resistant than steel springs.