About Moment Loads
More
About Durometer Hardness Scales
More
Extra-Wide Sleeve Bearing Carriages and Guide Rails
With a wide base and low-profile design, these carriages and guide rails stabilize moment (twisting) and off-center loads better than standard carriages and rails. Use in areas where multiple carriages or rails won't fit. Sleeve bearings allow them to outperform ball bearings in wet, dirty, and high-vibration environments. Mount in any orientation without affecting load capacity.
Aluminum carriages conduct and dissipate the heat produced by friction, protecting your machinery. They are more corrosion resistant than zinc carriages.
Zinc carriages are mildly corrosion resistant.
One-piece carriages are less likely to become misaligned over time than multipiece carriages, which have four distinct bearing blocks.
For technical drawings and 3-D models, click on a part number.
Aluminum Carriages and PTFE Plastic Bearings | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mounting | Anodized Aluminum Guide Rails | ||||||||||||||
| For Rail Wd., mm | Static Load Cap., lbs. | O'all Ht., mm | Carriage Wd., mm | Carriage Lg., mm | Max. Temp., °F | No. of Holes | Hole Thread Size  | Hole Thread Pitch, mm | Hole Dp., mm | Fasteners Included | Each | Rail Lengths, mm | Per mm | ||
Square | |||||||||||||||
| 27 | 370 | 18 | 54 | 60 | 190° | 4 | M4 | 0.7 | 15 | No | 00000000 | 0000000 | 0000000 | 00000 | |
| 27 | 370 | 18 | 54 | 80 | 190° | 4 | M4 | 0.7 | 13 | No | 00000000 | 000000 | 0000000 | 000 | |
| 27 | 370 | 18 | 54 | 100 | 190° | 4 | M4 | 0.7 | 15 | No | 00000000 | 000000 | 0000000 | 000 | |
Zinc Carriages and PTFE Plastic Bearings | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mounting | Anodized Aluminum Guide Rails | ||||||||||||||
| For Rail Wd., mm | Static Load Cap., lbs. | O'all Ht., mm | Carriage Wd., mm | Carriage Lg., mm | Max. Temp., °F | No. of Holes | Hole Thread Size | Hole Thread Pitch, mm | Hole Dp., mm | Fasteners Included | Each | Rail Lengths, mm | Per mm | ||
Square | |||||||||||||||
| 27 | 370 | 18 | 54 | 60 | 190° | 4 | M4 | 0.7 | 15 | No | 0000000 | 000000 | 0000000 | 00000 | |
| 27 | 370 | 18 | 54 | 80 | 190° | 4 | M4 | 0.7 | 15 | No | 00000000 | 00000 | 0000000 | 000 | |
| 27 | 370 | 18 | 54 | 100 | 190° | 4 | M4 | 0.7 | 15 | No | 00000000 | 00000 | 0000000 | 000 | |
Aluminum Carriages and PTFE Plastic Bearings | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mounting | Anodized Aluminum Guide Rails | ||||||||||||||
| For Rail Wd., mm | Static Load Cap., lbs. | O'all Ht., mm | Carriage Wd., mm | Carriage Lg., mm | Max. Temp., °F | No. of Holes | Hole Thread Size | Hole Thread Pitch, mm | Hole Dp., mm | Fasteners Included | Each | Rail Lengths, mm | Per mm | ||
Square | |||||||||||||||
| 27 | 370 | 16 | 54 | 60 | 190° | 4 | M4 | 0.7 | 13 | No | 00000000 | 000000 | 0000000 | 00000 | |
| 27 | 370 | 16 | 54 | 80 | 190° | 4 | M4 | 0.7 | 13 | No | 00000000 | 000000 | 0000000 | 000 | |
| 27 | 370 | 16 | 54 | 100 | 190° | 4 | M4 | 0.7 | 13 | No | 00000000 | 000000 | 0000000 | 000 | |
| 36 | 1,050 | 22 | 73 | 100 | 190° | 4 | M6 | 1 | 15 | No | 00000000 | 000000 | 0000000 | 000 | |
| 36 | 1,050 | 22 | 73 | 150 | 190° | 4 | M6 | 1 | 15 | No | 00000000 | 000000 | 0000000 | 000 | |
| 36 | 1,050 | 22 | 73 | 200 | 190° | 4 | M6 | 1 | 15 | No | 00000000 | 000000 | 0000000 | 000 | |
| 54 | 1,880 | 30 | 104 | 100 | 190° | 4 | M8 | 1.25 | 22 | No | 00000000 | 000000 | 0000000 | 000 | |
| 54 | 1,880 | 30 | 104 | 150 | 190° | 4 | M8 | 1.25 | 22 | No | 00000000 | 000000 | 0000000 | 000 | |
| 54 | 1,880 | 30 | 104 | 200 | 190° | 4 | M8 | 1.25 | 22 | No | 00000000 | 000000 | 0000000 | 000 | |
| 70 | 1,070 | 22 | 107 | 100 | 190° | 4 | M6 | 1 | 15 | No | 00000000 | 000000 | 0000000 | 000 | |
| 74 | 2,870 | 40 | 134 | 150 | 190° | 4 | M8 | 1.25 | 32 | No | 00000000 | 000000 | 0000000 | 000 | |
| 74 | 2,870 | 40 | 134 | 200 | 190° | 4 | M8 | 1.25 | 32 | No | 00000000 | 000000 | 0000000 | 000 | |
| 74 | 2,870 | 40 | 134 | 250 | 190° | 4 | M8 | 1.25 | 32 | No | 00000000 | 000000 | 0000000 | 000 | |
| For Carriage Wd., mm | For Rail Profile | Each | |
| 54 | Square | 00000000 | 00000 |
Locking Extra-Wide Sleeve Bearing Carriages and Guide Rails
A handle on the side of the carriage locks the carriage in place. Carriages have a wide base for stabilizing moment (twisting) and off-center loads better than standard sleeve bearing carriages. Use them in areas where multiple carriages or rails won't fit. The sleeve bearings allow them to outperform ball bearings in wet, dirty, and high-vibration environments. Mount in any orientation without affecting load capacity.
Zinc carriages are mildly corrosion resistant.
For technical drawings and 3-D models, click on a part number.
Zinc Carriages and PTFE Plastic Bearings | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mounting | Anodized Aluminum Guide Rails | ||||||||||||||||
| For Rail Wd., mm | Static Load Cap., lbs. | O'all Wd., mm | O'all Ht., mm | Carriage Wd., mm | Carriage Lg., mm | Handle Lg., mm | Max. Temp., °F | No. of Holes | Hole Thread Size | Hole Thread Pitch, mm | Hole Dp., mm | Fasteners Included | Each | Rail Lengths, mm | Per mm | ||
Square | |||||||||||||||||
| 27 | 370 | 82 | 18 | 54 | 60 | 28 | 190° | 4 | M4 | 0.7 | 15 | No | 00000000 | 0000000 | 0000000 | 00000 | |
| 27 | 370 | 82 | 18 | 54 | 80 | 28 | 190° | 4 | M4 | 0.7 | 15 | No | 00000000 | 00000 | 0000000 | 000 | |
| For Carriage Wd., mm | For Rail Profile | Each | |
| 54 | Square | 00000000 | 00000 |
| For Carriage Wd., mm | Static Load Cap., lbs. | Each | |
For Zinc Carriages | |||
|---|---|---|---|
| 54 | 90 | 00000000 | 000000 |
Square Sleeve Bearing Carriages and Guide Rails
The square profile prevents loads from twisting and rotating. Mount in any orientation without affecting load capacity. Carriages have strong, chemical- and abrasion-resistant Frelon bearings on all four sides. Adjust the bearing plugs to maintain precise alignment.
For technical drawings and 3-D models, click on a part number.
Aluminum Carriages and Frelon Plastic Bearings | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mounting | 304 Stainless Steel Guide Rails | |||||||||||||||
| For Rail Wd. | Static Load Cap., lbs. | Carriage Wd. | Carriage Lg. | Carriage Ht. | Max. Temp., °F | No. of Holes | No. of Holes per Side | Hole Thread Size | Hole Dp. | Fasteners Included | Lubrication | Each | Rail Lengths, ft. | Per Ft. | ||
| 1" | 920 | 1 23/32" | 2 1/4" | 1 23/32" | 400° | 16 | 4 | 8-32 | 21/64" | No | Not Required | 00000000 | 0000000 | 00000000 | 000000 | |
| 1" | 920 | 1 23/32" | 4" | 1 23/32" | 400° | 32 | 8 | 8-32 | 21/64" | No | Not Required | 00000000 | 000000 | 00000000 | 00000 | |
| 1 1/2" | 1,800 | 2 5/16" | 3 1/8" | 2 5/16" | 400° | 16 | 4 | 1/4"-20 | 11/32" | No | Not Required | 00000000 | 000000 | 00000000 | 00000 | |
| 1 1/2" | 1,800 | 2 5/16" | 6" | 2 5/16" | 400° | 32 | 8 | 1/4"-20 | 11/32" | No | Not Required | 00000000 | 000000 | 00000000 | 00000 | |
| Replacement 316 Stainless Steel Plug with Frelon Plastic Bearing | 00000000 | Each | 000000 |
Low-Friction Adhesive-Back Feet
These feet are made of UHMW polyethylene plastic, so they won’t dry out and become brittle. Also known as glides, stick these feet under furniture and equipment to slide easily across surfaces to protect floors from scratches and wear.
For technical drawings and 3-D models, click on a part number.
Chemical-Resistant Low-Friction Adhesive-Back Feet
Excellent chemical resistance makes these PTFE plastic feet the best choice for harsh environments. Also known as glides, stick these feet under furniture and equipment to slide easily across surfaces to protect floors from scratches and wear.
For technical drawings and 3-D models, click on a part number.
Angled Press-Fit Feet
Also known as glides, press these feet into tubular legs of tables, chairs, and other furniture to protect floors from scratches and wear.
For technical drawings and 3-D models, click on a part number.
For Leg | Base | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Leg Angle | Outer Lg. | Outer Wd. | Inner Lg. | Inner Wd. | Lg. | Wd. | Ht. | Pkg. Qty. | Pkg. | ||
Black Plastic | |||||||||||
| 1 | Any | 3/4" | 3/4" | 0.62" | 0.62" | 3/4" | 3/4" | 25/32" | 25 | 0000000 | 00000 |
| 1 | Any | 3/4" | 3/4" | 0.65" | 0.65" | 3/4" | 3/4" | 25/32" | 25 | 0000000 | 0000 |
| 1 | Any | 7/8" | 7/8" | 0.78" | 0.78" | 7/8" | 7/8" | 27/32" | 25 | 00000000 | 00000 |
| 2 | 5° | 3/4" | 3/4" | 0.62"-0.65" | 0.62"-0.65" | 3/4" | 3/4" | 21/32" | 25 | 00000000 | 00000 |
| 2 | 15° | 1" | 1" | 0.87"-0.93" | 0.87"-0.93" | 1" | 1" | 29/32" | 25 | 00000000 | 00000 |
| 2 | 25° | 3/4" | 3/4" | 0.62"-0.65" | 0.62"-0.65" | 3/4" | 3/4" | 1 1/32" | 25 | 00000000 | 00000 |
Swiveling Press-Fit Feet
A swiveling base compensates for angled legs and uneven surfaces. Also known as glides, press these feet into tubular legs of tables, chairs, and other furniture to protect floors from scratches and wear.
For technical drawings and 3-D models, click on a part number.
For Leg | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Outer Lg. | Outer Wd. | Inner Lg. | Inner Wd. | Base Dia. | Base Ht. | Base Material | Each | ||
Stainless Steel | |||||||||
| 3 | 3/4" | 3/4" | 0.62"-0.65" | 0.62"-0.65" | 1 1/16" | 1 1/32" | Stainless Steel | 0000000 | 00000 |
Press-Fit Feet
Also known as glides, press these feet into tubular legs of tables, chairs, and other furniture to protect floors from scratches and wear.
For technical drawings and 3-D models, click on a part number.
Rest-On Feet
Place these feet under furniture and equipment.
For technical drawings and 3-D models, click on a part number.
For Leg | Base | ||||||
|---|---|---|---|---|---|---|---|
| Style | Outer Lg. | Outer Wd. | Lg. | Wd. | Pkg. Qty. | Pkg. | |
Brown Rubber | |||||||
| 5 | 2 1/16" | 2 1/16" | 2 1/2" | 2 1/2" | 4 | 0000000 | 00000 |