About Files
Files, also known as American-pattern and machinists' files, are used to remove material quickly.
Precision files, also known as Swiss-pattern files, are made to exacting measurements to ensure smoothness and are useful for finishing delicate and intricate parts.
More
Economy Needle File Sets
6-Piece Set
12-Piece Set
Rectangular
Tapered Half Round
Tapered Rectangular
Tapered Round
Tapered Square
Tapered Triangular
Joint
Slitting
Tapered Barrette
Tapered Crossing
Tapered Knife
Tapered Marking
These files are for infrequent use. The small tips allow precise work in tight spots. These files do not include a handle but do have a tang that fits into a handle. Length includes the tang.
For technical drawings and 3-D models, click on a part number.
6-Piece Sets—5 1/2" Lg.
| Finish No. | Includes | For Use On | Each | |
| 0 | One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. | Steel, Iron | 0000000 | 00000 |
| 2 | One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. | Steel, Iron | 0000000 | 0000 |
| 4 | One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. | Steel, Iron | 0000000 | 0000 |
6-Piece Sets—6 1/4" Lg.
| Finish No. | Includes | For Use On | Each | |
| 0 | One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. | Steel, Iron | 0000000 | 00000 |
| 2 | One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. | Steel, Iron | 0000000 | 0000 |
| 4 | One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. | Steel, Iron | 0000000 | 0000 |
12-Piece Sets—5 1/2" Lg.
| Finish No. | Includes | For Use On | Each | |
| 0 | One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg. × 0.202" Wd. × 0.067" Thick. One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Medium-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. | Steel, Iron | 0000000 | 000000 |
| 2 | One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. | Steel, Iron | 0000000 | 00000 |
| 4 | One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick. One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. | Steel, Iron | 0000000 | 00000 |
12-Piece Sets—6 1/4" Lg.
| Finish No. | Includes | For Use On | Each | |
| 0 | One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Medium-Finish Tapered Knife File with Double-Cut Faces, One Single-Cut Edge, and One Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick. One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Medium-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. | Steel, Iron | 0000000 | 000000 |
| 2 | One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Fine-Finish Tapered Knife File with Double-Cut Faces, One Single-Cut Edge, and One Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. | Steel, Iron | 0000000 | 00000 |
| 4 | One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Extra-Fine-Finish Tapered Knife File with Double-Cut Faces, One Single-Cut Edge, and One Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick. One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. | Steel, Iron | 0000000 | 00000 |
Needle File Sets
Joint
Rectangular
Slitting
Tapered Barrette
Tapered Crossing
Tapered Half Round
Tapered Knife
Tapered Marking
Tapered Rectangular
Tapered Round
Tapered Square
Tapered Triangular
These files are for frequent use. The small tips allow precise work in tight spots. These files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.
For technical drawings and 3-D models, click on a part number.
12-Piece Sets—4" Lg.
| Finish No. | Includes | For Use On | Each | |
| 0 | One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.129" Wd. × 0.028" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.135" Wd. × 0.039" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—4" Lg. × 0.149" Wd. × 0.053" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—4" Lg. × 0.071" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—4" Lg. × 0.108" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—4" Lg. × 0.069" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—4" Lg. × 0.148" Wd. × 0.052" Thick. One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—4" Lg. × 0.155" Wd. × 0.053" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—4" Lg. × 0.133" Wd. × 0.053" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—4" Lg. × 0.153" Wd. × 0.040" Thick. One Medium-Finish Slitting File with Double-Cut Faces—4" Lg. × 0.182" Wd. × 0.059" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—4" Lg. × 0.140" Wd. × 0.044" Thick. | Steel, Iron | 0000000 | 0000000 |
| 2 | One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.129" Wd. × 0.028" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.135" Wd. × 0.039" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—4" Lg. × 0.149" Wd. × 0.053" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—4" Lg. × 0.071" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—4" Lg. × 0.108" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—4" Lg. × 0.069" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—4" Lg.×0.148" Wd.×0.052" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—4" Lg. × 0.155" Wd. × 0.053" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—4" Lg. × 0.133" Wd. × 0.053" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—4" Lg. × 0.153" Wd. × 0.040" Thick. One Fine-Finish Slitting File with Double-Cut Faces—4" Lg. × 0.182" Wd. × 0.059" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—4" Lg. × 0.140" Wd. × 0.044" Thick. | Steel, Iron | 0000000 | 000000 |
12-Piece Sets—5 1/2" Lg.
| Finish No. | Includes | For Use On | Each | |
| 0 | One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg. × 0.202" Wd. × 0.067" Thick. One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Medium-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. | Steel, Iron | 0000000 | 0000000 |
| 2 | One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. | Steel, Iron | 0000000 | 000000 |
| 4 | One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick. One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. | Steel, Iron | 0000000 | 000000 |
12-Piece Sets—6 1/4" Lg.
| Finish No. | Includes | For Use On | Each | |
| 0 | One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Medium-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. | Steel, Iron | 0000000 | 0000000 |
| 2 | One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. | Steel, Iron | 0000000 | 000000 |
| 4 | One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg.×0.213" Wd.×0.059" Thick One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick. One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. | Steel, Iron | 0000000 | 000000 |
| 6 | One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg.×0.213" Wd.×0.059" Thick One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick. One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. | Steel, Iron | 0000000 | 000000 |
Bend-and-Stay Needle File Sets
 |  |  Barrette |  Half Round |  Rectangular |
 Round |  Square |  Triangular |
Bend these files to conform to your workpiece and they will hold the shape until you bend them again. They can be bent more than 100 times without breaking. The small tip allows precise work in tight spots. These files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.
| Finish No. | Includes | For Use On | Each | |
6-Piece Sets | ||||
|---|---|---|---|---|
| 2 | One Fine-Finish Tapered Rectangular File with Single-Cut Faces—6 1/4" Lg. × 7/32" Wd. × 1/16" Thick. One Fine-Finish Tapered Half-Round File with Single-Cut Faces—6 1/4" Lg. × 3/32" Wd. × 5/64" Thick. One Fine-Finish Tapered Round File with Single-Cut Face—6 1/4" Lg. × 1/8" Dia. One Fine-Finish Tapered Triangular File with Single-Cut Faces—6 1/4" Lg. × 1/8" Wd. One Fine-Finish Tapered Square File with Single-Cut Faces—6 1/4" Lg. × 7/64" Wd. One Fine-Finish Tapered Barrette File with Single-Cut Faces—6 1/4" Lg. × 3/32" Wd. × 1/16" Thick. | Steel, Iron | 0000000 | 0000000 |
Needle Files
Tapered Square
The small tip allows precise work in tight spots. These files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.
Square files are good for slots, keyways, grooves, and corners.
Double Cut—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.
For technical drawings and 3-D models, click on a part number.
Bend-and-Stay Needle Files
Square
Bend these files to conform to your workpiece and they will hold the shape until you bend them again. They can be bent more than 100 times without breaking. The small tip allows precise work in tight spots. Files have one set of diagonal teeth. They do not include a handle but do have a tang that fits into a handle. Length does not include the tang.
Square files are good for slots, keyways, grooves, and corners.
For Fine Finish (No. 2) | |||||
|---|---|---|---|---|---|
| Lg. | Wd. | Face Tooth Style | For Use On | Each | |
Square | |||||
| 6 1/4" | 7/64" | Single Cut | Steel, Iron | 0000000 | 000000 |
Carbide Needle Files
Rectangular
Round
Triangular
Square
Knife
Second only to diamond in hardness, these files last 100 times longer than standard files. The small tip allows precise work in tight spots.
Round files are good for filing holes and concave surfaces.
Triangular files have three filing surfaces to work in spots others can't.
Square files are good for slots, keyways, grooves, and corners.
Knife files get into tight angles, corners, and slots.
For technical drawings and 3-D models, click on a part number.
For Extra Fine Finish (280 Grit) | ||||||
|---|---|---|---|---|---|---|
| Lg. | Dia. | Wd. | Thick. | For Use On | Each | |
Rectangular | ||||||
| 5 1/2" | __ | 0.236" | 0.083" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Brick | 0000000 | 000000 |
| 7 1/8" | __ | 0.394" | 0.108" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Brick | 0000000 | 00000 |
Round | ||||||
| 5 1/2" | 0.128" | __ | __ | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Brick | 0000000 | 00000 |
| 7 1/8" | 0.217" | __ | __ | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Brick | 0000000 | 00000 |
Triangular | ||||||
| 5 1/2" | __ | 0.167" | 0.167" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Brick | 0000000 | 00000 |
| 7 1/8" | __ | 0.276" | 0.276" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Brick | 0000000 | 00000 |
Square | ||||||
| 5 1/2" | __ | 0.128" | 0.128" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Brick | 0000000 | 00000 |
| 7 1/8" | __ | 0.197" | 0.197" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Brick | 0000000 | 00000 |
Knife | ||||||
| 5 1/2" | __ | 0.207" | 0.089" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Brick | 0000000 | 00000 |
| 7 1/8" | __ | 0.354" | 0.128" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Brick | 0000000 | 00000 |
Carbide Needle File Sets
Second only to diamond in hardness, these files last 100 times longer than standard files. The small tips allow precise work in tight spots.
For technical drawings and 3-D models, click on a part number.
6-Piece Sets—5 1/2" Lg.
 | Knife | Rectangular | Round |
Square | Triangular |
| Includes | For Use On | Each | |
| One Extra-Fine-Finish (280 Grit) Rectangular File—5 1/2" Lg. × 0.236" Wd. × 0.083" Thick. One Extra-Fine-Finish (280 Grit) Tapered Round File—5 1/2" Lg. × 0.128" Dia. One Extra-Fine-Finish (280 Grit) Tapered Triangular File—5 1/2" Lg. × 0.167" Wd. One Extra-Fine-Finish (280 Grit) Tapered Square File—5 1/2" Lg. × 0.128" Wd. One Extra-Fine-Finish (280 Grit) Tapered Knife File—5 1/2" Lg. × 0.207" Wd. × 0.089" Thick. One Plastic Handle | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Brick | 0000000 | 000000 |
6-Piece Sets—7 1/8" Lg.
| Knife | Rectangular | Round |
Square | Triangular |
| Includes | For Use On | Each | |
| One Extra-Fine-Finish (280 Grit) Rectangular File—7 1/8" Lg. × 0.394" Wd. × 0.108" Thick. One Extra-Fine-Finish (280 Grit) Tapered Round File—7 1/8" Lg. × 0.217" Dia. One Extra-Fine-Finish (280 Grit) Tapered Triangular File—7 1/8" Lg. × 0.276" Wd. One Extra-Fine-Finish (280 Grit) Tapered Square File—7 1/8" Lg. × 0.197" Wd. One Extra-Fine-Finish (280 Grit) Tapered Knife File—7 1/8" Lg. × 0.354" Wd. × 0.128" Thick. One Plastic Handle | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Brick | 0000000 | 000000 |
Diamond Needle File Sets
 |  Straight Rectangular |  Tapered Crossing |  Tapered Half Round |
 Tapered Round |  Tapered Square |  Tapered Triangular |
The hardest files available, these are the longest lasting and strong enough to file hard materials. The small tips allow precise work in tight spots.
For technical drawings and 3-D models, click on a part number.
6-Piece Sets for Coarse Finish (80-100 Grit)
| Includes | For Use On | Each | |
| One Coarse-Finish (80-100 Grit) Rectangular File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.201" Wd. × 0.055" Thick. One Coarse-Finish (80-100 Grit) Tapered Half-Round File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.213" Wd. × 0.075" Thick. One Coarse-Finish (80-100 Grit) Tapered Round File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.118" Dia. One Coarse-Finish (80-100 Grit) Tapered Triangular File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.154" Wd. One Coarse-Finish (80-100 Grit) Tapered Square File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.098" Wd. One Coarse-Finish (80-100 Grit) Tapered Crossing File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.185" Wd. × 0.087" Thick. | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 0000000 |
6-Piece Sets for Medium Finish (120-140 Grit)
| Includes | For Use On | Each | |
| One Medium-Finish (120-140 Grit) Rectangular File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.201" Wd. × 0.055" Thick. One Medium-Finish (120-140 Grit) Tapered Half-Round File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.213" Wd. × 0.075" Thick. One Medium-Finish (120-140 Grit) Tapered Round File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.118" Dia. One Medium-Finish (120-140 Grit) Tapered Triangular File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.154" Wd. One Medium-Finish (120-140 Grit) Tapered Square File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.098" Wd. One Medium-Finish (120-140 Grit) Tapered Crossing File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.185" Wd. × 0.087" Thick. | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 0000000 |
6-Piece Sets for Fine Finish (170-200 Grit)
| Includes | For Use On | Each | |
| One Fine-Finish (170-200 Grit) Rectangular File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.201" Wd. × 0.055" Thick. One Fine-Finish (170-200 Grit) Tapered Half-Round File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.213" Wd. × 0.075" Thick. One Fine-Finish (170-200 Grit) Tapered Round File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.118" Dia. One Fine-Finish (170-200 Grit) Tapered Triangular File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.154" Wd. One Fine-Finish (170-200 Grit) Tapered Square File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.098" Wd. One Fine-Finish (170-200 Grit) Tapered Crossing File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.185" Wd. × 0.087" Thick. | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 0000000 |
Diamond Needle Files
Tapered Square
The hardest files available, these are the longest lasting and strong enough to file hard materials. The small tip allows precise work in tight spots.
Files with 1.563" diamond surface length are also known as escapement files.
Square files are good for slots, keyways, grooves, and corners.
For technical drawings and 3-D models, click on a part number.
For Coarse Finish (80-100 Grit) | For Medium Finish (120-150 Grit) | For Fine Finish (150-180 Grit) | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Diamond Surface Lg. | Lg. | Wd. | For Use On | Each | Each | Each | |||
Tapered Square | |||||||||
| 1.563" | 5 1/2" | 0.079" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |
File Sets
For technical drawings and 3-D models, click on a part number.
5-Piece Sets with Wood Handles
 |  Half Round with Double-Cut Faces |  Tapered Rectangular with Rapid-Cut Faces |  Tapered Rectangular with Single-Cut Faces |
 Tapered Round with Double-Cut Face |  Tapered Square with Double-Cut Faces |
| Includes | Container Type | For Use On | Each | |
| One Coarse-Finish Tapered Rectangular File with Single-Cut Faces—8" Lg. One Coarse-Finish Half-Round File with Double-Cut Faces—8" Lg. One Coarse-Finish Tapered Round File with Double-Cut Face—8" Lg. One Coarse-Finish Tapered Square File with Double-Cut Faces—8" Lg. One Fine-Finish Tapered Rectangular File with Rapid-Cut Faces—8" Lg. | Canvas Roll-Up Pouch | Steel, Iron | 0000000 | 000000 |
6-Piece Sets
 | Half Round with Double-Cut Faces |  Tapered Rectangular with Double-Cut Faces | Tapered Round with Double-Cut Face |
Tapered Square with Double-Cut Faces |  Thin-Tapered Rectangular with Double-Cut Faces |  Thin-Tapered Triangular with Single-Cut Faces |
| Includes | Container Type | For Use On | Each | |
| One Fine-Finish Tapered Rectangular File with Double-Cut Faces—4" Lg. One Fine-Finish Thin-Tapered Rectangular File with Double-Cut Faces—4" Lg. One Fine-Finish Half-Round File with Double-Cut Faces—4" Lg. One Fine-Finish Tapered Round File with Double-Cut Face—4" Lg. One Fine-Finish Thin-Tapered Triangular File with Single-Cut Faces—4" Lg. One Fine-Finish Tapered Square File with Double-Cut Faces—4" Lg. | Canvas Roll-Up Pouch | Steel, Iron | 0000000 | 000000 |
6-Piece Sets with Wood Handles
 |  Rectangular with Double-Cut Faces |  Tapered Half Round with Double-Cut Faces | Tapered Round with Double-Cut Face |
Tapered Square with Double-Cut Faces |  Tapered Triangular with Double-Cut Faces | Thin-Tapered Rectangular with Double-Cut Faces |
| Includes | Container Type | For Use On | Each | |
| One Medium-Finish Rectangular File with Double-Cut Faces—4" Lg. One Medium-Finish Thin-Tapered Rectangular File with Double-Cut Faces—4" Lg. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—4" Lg. One Medium-Finish Tapered Round File with Double-Cut Face—4" Lg. One Medium-Finish Tapered Triangular File with Double-Cut Faces—4" Lg. One Medium-Finish Tapered Square File with Double-Cut Faces—4" Lg. | Metal Case | Steel, Iron | 0000000 | 000000 |
6-Piece Sets with Wood Handles
 | Half Round with Double-Cut Faces | Tapered Rectangular with Double-Cut Faces | Tapered Round with Double-Cut Face |
Tapered Square with Double-Cut Faces | Thin-Tapered Rectangular with Double-Cut Faces | Thin-Tapered Triangular with Single-Cut Faces |
| Includes | Container Type | For Use On | Each | |
| One Fine-Finish Tapered Rectangular File with Double-Cut Faces—4" Lg. One Fine-Finish Thin-Tapered Rectangular File with Double-Cut Faces—4" Lg. One Fine-Finish Half-Round File with Double-Cut Faces—4" Lg. One Fine-Finish Tapered Round File with Double-Cut Face—4" Lg. One Fine-Finish Thin-Tapered Triangular File with Single-Cut Faces—4" Lg. One Fine-Finish Tapered Square File with Double-Cut Faces—4" Lg. | Canvas Roll-Up Pouch | Steel, Iron | 0000000 | 000000 |
9-Piece Sets
 | Half Round with Double-Cut Faces |  Rasp |
Tapered Rectangular with Double-Cut Faces | Tapered Rectangular with Single-Cut Faces | |
Tapered Round with Double-Cut Face | Tapered Square with Double-Cut Faces | Thin-Tapered Triangular with Single-Cut Faces |
| Includes | Container Type | For Use On | Each | |
| One Coarse-Finish Tapered Rectangular File with Double-Cut Faces—10" Lg. One Coarse-Finish Tapered Rectangular File with Single-Cut Faces—10" Lg. One Coarse-Finish Half-Round File with Double-Cut Faces—10" Lg. One Coarse-Finish Tapered Round File with Double-Cut Face—10" Lg. One Coarse-Finish Tapered Square File with Double-Cut Faces—10" Lg. One Fine-Finish Tapered Rectangular File with Double-Cut Faces—10" Lg. One Fine-Finish Thin-Tapered Triangular File with Single-Cut Faces—7" Lg. One 10" Lg. Rasp One File Cleaner | Canvas Roll-Up Pouch | Steel, Iron | 0000000 | 0000000 |
9-Piece Sets with Wood Handles
 | Half Round with Double-Cut Faces | Rasp |
Tapered Rectangular with Double-Cut Faces | Tapered Rectangular with Single-Cut Faces | |
Tapered Round with Double-Cut Face | Tapered Square with Double-Cut Faces | Thin-Tapered Triangular with Single-Cut Faces |
| Includes | Container Type | For Use On | Each | |
| One Coarse-Finish Tapered Rectangular File with Double-Cut Faces—10" Lg. One Coarse-Finish Tapered Rectangular File with Single-Cut Faces—10" Lg. One Coarse-Finish Half-Round File with Double-Cut Faces—10" Lg. One Coarse-Finish Tapered Round File with Double-Cut Face—10" Lg. One Coarse-Finish Tapered Square File with Double-Cut Faces—10" Lg. One Fine-Finish Tapered Rectangular File with Double-Cut Faces—10" Lg. One Fine-Finish Thin-Tapered Triangular File with Single-Cut Faces—7" Lg. One 10" Lg. Rasp One File Cleaner | Canvas Roll-Up Pouch | Steel, Iron | 0000000 | 0000000 |
10-Piece Sets with Wood Handles
 |  Half Round |  Knife |  Tapered Rectangular |
 Tapered Round |  Tapered Square |
| Includes | Container Type | For Use On | Each | |
| One Coarse-Finish Tapered Rectangular File with Double-Cut Faces—10" Lg. One Coarse-Finish Half-Round File with Double-Cut Faces—10" Lg. One Coarse-Finish Tapered Round File with Double-Cut Face—10" Lg. One Coarse-Finish Tapered Square File with Double-Cut Faces—10" Lg. One Coarse-Finish Knife File with Double-Cut Faces—6" Lg. One Medium-Finish Tapered Rectangular File with Double-Cut Faces—10" Lg. One Medium-Finish Half-Round File with Double-Cut Faces—10" Lg. One Medium-Finish Tapered Round File with Double-Cut Face—10" Lg. One Medium-Finish Tapered Square File with Double-Cut Faces—10" Lg. One Medium-Finish Knife File with Double-Cut Faces—6" Lg. | Canvas Roll-Up Pouch | Steel, Iron | 00000000 | 0000000 |
13-Piece Sets
 | Half Round with Double-Cut Faces |  Rectangular with One Double-Cut Face and One Single-Cut Face |
Tapered Rectangular with Double-Cut Faces | Tapered Rectangular with Single-Cut Faces | |
Tapered Round with Double-Cut Face | Tapered Square with Double-Cut Faces | Tapered Triangular with Double-Cut Faces |
| Includes | Container Type | For Use On | Each | |
| One Coarse-Finish Rectangular File with One Double-Cut Face and One Single-Cut Face—10" Lg. One Coarse-Finish Tapered Rectangular File with Double-Cut Faces—10" Lg. One Coarse-Finish Tapered Rectangular File with Single-Cut Faces—10" Lg. One Coarse-Finish Tapered Rectangular File (For Use Only On Aluminum) with Double-Cut Faces—10" Lg. One Coarse-Finish Half-Round File with Double-Cut Faces—10" Lg. One Coarse-Finish Tapered Round File with Double-Cut Face—10" Lg. One Medium-Finish Tapered Triangular File with Double-Cut Faces—8" Lg. One Medium-Finish Tapered Square File with Double-Cut Faces—10" Lg. One Fine-Finish Tapered Rectangular File with Double-Cut Faces—10" Lg. One Fine-Finish Tapered Rectangular File with Single-Cut Faces—10" Lg. One Fine-Finish Half-Round File with Double-Cut Faces—10" Lg. One Fine-Finish Tapered Round File with Double-Cut Face—10" Lg. One File Cleaner | Canvas Roll-Up Pouch | Steel, Iron | 0000000 | 0000000 |
13-Piece Sets with Wood Handles
 | Half Round with Double-Cut Faces | Rectangular with One Double-Cut Face and One Single-Cut Face |
Tapered Rectangular with Double-Cut Faces | Tapered Rectangular with Single-Cut Faces | |
Tapered Round with Double-Cut Face | Tapered Square with Double-Cut Faces | Tapered Triangular with Double-Cut Faces |
| Includes | Container Type | For Use On | Each | |
| One Coarse-Finish Rectangular File with One Double-Cut Face and One Single-Cut Face—10" Lg. One Coarse-Finish Tapered Rectangular File with Double-Cut Faces—10" Lg. One Coarse-Finish Tapered Rectangular File with Single-Cut Faces—10" Lg. One Coarse-Finish Tapered Rectangular File (For Use Only On Aluminum) with Double-Cut Faces—10" Lg. One Coarse-Finish Half-Round File with Double-Cut Faces—10" Lg. One Coarse-Finish Tapered Round File with Double-Cut Face—10" Lg. One Medium-Finish Tapered Triangular File with Double-Cut Faces—8" Lg. One Medium-Finish Tapered Square File with Double-Cut Faces—10" Lg. One Fine-Finish Tapered Rectangular File with Double-Cut Faces—10" Lg. One Fine-Finish Tapered Rectangular File with Single-Cut Faces—10" Lg. One Fine-Finish Half-Round File with Double-Cut Faces—10" Lg. One Fine-Finish Tapered Round File with Double-Cut Face—10" Lg. One File Cleaner | Canvas Roll-Up Pouch | Steel, Iron | 0000000 | 0000000 |
Square Files
Double Cut
File slots, keyways, grooves, and corners with these four-sided tools. They have two sets of diagonal teeth. Files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.
For technical drawings and 3-D models, click on a part number.
For Coarse Finish | For Medium Finish | For Fine Finish | ||||||
|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | For Use On | Each | Each | Each | |||
Double-Cut Faces | ||||||||
| 4" | 5/32" | Steel, Iron | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 000000 |
| 6" | 1/4" | Steel, Iron | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 00000 |
| 8" | 5/16" | Steel, Iron | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 00000 |
| 10" | 3/8" | Steel, Iron | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
| 12" | 1/2" | Steel, Iron | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
| 14" | 5/8" | Steel, Iron | 0000000 | 00000 | 000000 | 00 | 0000000 | 00000 |
Square Diamond Files
1.5" Diamond Surface Lg.
4.328" Diamond Surface Lg.
Straight
Tapered
File slots, keyways, grooves, and corners. Diamond is the hardest, longest-lasting abrasive available and strong enough to file hard materials.
For technical drawings and 3-D models, click on a part number.
For Coarse Finish (80-100 Grit) | For Medium Finish (120-150 Grit) | For Fine Finish (150-180 Grit) | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Diamond Surface Lg. | Lg. | Wd. | For Use On | Each | Each | Each | |||
Straight | |||||||||
| 1.5" | 6" | 1/8" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |
Tapered | |||||||||
| 4.328" | 8 5/8" | 0.24" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
Rectangular Diamond Files
4.328" Diamond Surface Lg.
The hardest files available, these are the longest lasting and strong enough to file hard materials.
For technical drawings and 3-D models, click on a part number.
Half-Round Diamond Files
Use these files on concave, convex, and flat surfaces. Diamond is the hardest, longest-lasting abrasive available and strong enough to file hard materials.
For technical drawings and 3-D models, click on a part number.
Round Diamond Files
4.328" Diamond Surface Lg.
Tapered
Good for filing holes and concave surfaces. Diamond is the hardest, longest-lasting abrasive available and strong enough to file hard materials.
For technical drawings and 3-D models, click on a part number.
Triangular Diamond Files
4.328" Diamond Surface Lg.
Tapered
With three filing surfaces, these files work in spots others can't. Diamond is the hardest, longest-lasting abrasive available and strong enough to file hard materials.
For technical drawings and 3-D models, click on a part number.
Square Files for Stainless Steel
Double Cut
File slots, keyways, grooves, and corners with little to no clogging. These corrosion-resistant files have two sets of diagonal teeth. They do not include a handle but do have a tang that fits into a handle. Length does not include the tang.