Also known as pipe plug sockets, these sockets have a square shape that provides the best possible grip on square fasteners and prevents rounding.

These short sockets fit spaces where height clearance is limited.

Pivot the head to access fasteners from an angle.

Slide the open side of these sockets over a tube or hose to adjust a nut that’s already installed.

Designed to fit on external Torx-Plus fasteners, often found on pickup trucks, these sockets have squared lobes that resist slipping at high torque.

Insulated to protect against accidental contact with live electrical circuits, these sockets are tested to 1,000 volts to meet IEC 60900.

Grip the indentations around the outside of tri-groove fasteners.

Slip these slotted sockets onto wing nuts to tighten or loosen them with more force than fingers can apply.

These sockets fit the nuts found on water and gas valves.

Often used with an extension, these sockets turn fasteners and fittings in obstructed areas that a regular socket can't reach. They are also known as crowfoot wrenches.

Tighten and loosen fasteners at an angle by pivoting the head on these sockets.

Extra-long bits allow access to hard-to-reach fasteners.

These sockets are also known as pin-in-Torx bits.

The short Phillips bit on these sockets fits in spaces that screwdrivers can’t and where height clearance is limited.

An extra-long Phillips bit allows these sockets to reach far-away fasteners. Use them where standard or stubby sockets can’t reach.

An opening at the tip of these sockets fits around the security pin, allowing you to drive tamper-resistant Torx Plus screws.

A rubber insert grips the plug to prevent damage.

Achieve the best possible grip on hex fasteners and prevent rounding.

With a smaller OD than standard sockets, these fit between tightly spaced fasteners.

Pivot the head to access fasteners from an angle.

Quickly position these sockets on square fasteners.

These sockets are designed to tolerate continuous use with power tools and impact tools in high-volume production and assembly.

Pivot the head for access to fasteners in tight spots.

Position the head anywhere along the handle.

With twice as many corners, 8-point sockets grab onto square-drive screws and nuts more quickly than 4-point sockets.

Two spring-loaded balls inside these sockets firmly hold nuts and bolts in place as you turn them, including nonmagnetic fasteners like stainless steel screws.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

These sets organize what you need when working around live electrical circuits.

Keep a convenient mix of hex, Torx, Phillips, and slotted bit sockets on hand.

Tighten or loosen hard-to-reach fasteners with the extra-long bits in these socket sets.

Pivot the head of the sockets in these sets to access fasteners from an angle.

A spring-loaded ball on the bit holds fasteners in place as you drive them, including nonmagnetic fasteners like stainless steel screws.

These sockets are also known as pin-in-Torx bits.

Make maximum contact on all sides of a fastener to reduce slipping. These sockets are also known as torque adapters.

These sockets are made to withstand the high torque and force of impact tools.

Extra-long bits help you access hard-to-reach fasteners.

The hex shape grips hex fasteners and prevents rounding. These sockets are made to withstand the high torque and force of impact tools.

Push the square drive through the adapter to change size.

These adapters are insulated to protect against accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC 60900.

Pivot the head to access fasteners from an angle.

Extend your socket's reach.

The male ends of these extensions are rounded, so they can pivot to use your tool at an angle.

Lock your socket into these extensions to prevent accidental disengagement.

Bend these extensions to reach inconveniently located fasteners. These sets include multiple extension lengths, so you can find the right length to reach around obstructions.

Keep common extension lengths on hand to reach a variety of spots—just attach them to your socket.

Tighten and loosen fasteners in hard-to-reach spots with a variety of extensions that lengthen the reach of your socket.

Turn sockets with a bit screwdriver.

Attach to your socket for a longer reach.

Lock your socket into the extension to prevent accidental disengagement.

Pull the collar to quickly attach and remove sockets.

Use sockets with tools that accept hex shanks, such as drills and powered screwdrivers.

Store sockets on posts marked with the size.

Magnets hold sockets securely in place.

Move the sliding clips to any position along the rail to hold a variety of sockets.

Use your ratchet wrench as a handle to reach filters and other round objects in tight spots.

Designed to withstand high torque and force, these adapters fit the square drive on impact wrenches. Use with hex-shank bits (also known as insert bits).

Lock your bit into the adapter to prevent accidental disengagement. These adapters attach to square-drive tools.