Pivot the head to access fasteners from an angle.

Quickly position these sockets on square and external 8-point fasteners.

Grip the indentations around the outside of tri-groove fasteners.

The short bit on these sockets fits in spaces where height clearance is limited.

Extra-long bits allow access to hard-to-reach fasteners.

Extra-long bits allow access to hard-to-reach fasteners.

These sockets are also known as pin-in-Torx bits.

The short Phillips bit on these sockets fits in spaces that screwdrivers can’t and where height clearance is limited.

An extra-long Phillips bit allows these sockets to reach far-away fasteners. Use them where standard or stubby sockets can’t reach.

An opening at the tip of these sockets fits around the security pin, allowing you to drive tamper-resistant Torx Plus screws.

A magnet holds the fastener securely enough to drive self-tapping screws.

Pivot the head to access fasteners from an angle.

A magnet holds the fastener securely enough to drive self-tapping screws.

Position the head anywhere along the handle.

Turn sockets from above when there's not room to swing a standard wrench handle.

The ratcheting mechanism turns sockets quickly.

Suitable for occasional maintenance work, these sets are imported.

Suitable for occasional maintenance work, these sets are imported.

With squared lobes that won’t slip at high torque, all of the sockets in these sets are designed to fit on external Torx-Plus fasteners, often found on pickup trucks.

Grip the indentations around the outside of tri-groove fasteners.

The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.

In addition to a standard square drive, the sockets in these sets have a hex-shaped base so you can use a ratchet wrench along with an open-end or box wrench for additional leverage.

These sockets are also known as pin-in-Torx bits.

Extra-long bits allow access to hard-to-reach fasteners.

When vertical space is tight or you need an extra twist on your socket, use one of the dual-drive Phillips bit sockets in this set.

Use these sockets as an alternative to a screwdriver or L-key. They are made to withstand the high torque and force of impact tools.

Convert from one square drive size to another.

These adapters are insulated to protect against accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC 60900.

Extend your socket's reach.

Bend these socket extensions around obstructions to turn hard-to-reach fasteners.

Bend these extensions to reach inconveniently located fasteners. These sets include multiple extension lengths, so you can find the right length to reach around obstructions.

Keep common extension lengths on hand to reach a variety of spots—just attach them to your socket.

Fit these adapters between a wrench and socket to enable finger tightening.

Lock the adapter on your tool and the socket to the adapter to prevent accidental disengagement.

Convert from one square drive size to another.

Pull the collar to quickly attach and remove sockets.

First developed for aerospace and automotive assembly processes, these extensions will stand up to your high-volume production and assembly lines.

The slots in these low-profile organizers are a different color than the base so it's clear when tools are missing from your bench top or drawer.

The rail is smooth plastic so the clips move more easily than on steel-rail organizers.

Hold different square drive sizes on the four clip rails stored in these trays.

Choose a handle based on torque and change shafts to use a different size or drive style. Factory-set screwdrivers ensure you reach the same torque every time.

Designed to withstand high torque and force, these adapters fit the square drive on impact wrenches. Use with hex-shank bits (also known as insert bits).

Lock your bit into the adapter to prevent accidental disengagement. These adapters attach to square-drive tools.