Also known as pipe plug sockets, these sockets have a square shape that provides the best possible grip on square fasteners and prevents rounding.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

These short sockets fit spaces where height clearance is limited.

Designed for use with stainless steel fasteners, these sockets are more corrosion resistant than steel sockets and less likely to flake.

Eliminate the risk of your socket falling while reaching into your workspace with these flex sockets that have an integrated extension.

Pair these sockets with a bolt-through ratchet wrench to reach nuts at the bottom of a long threaded rod or bolt which can pass through the socket and the head of the wrench.

Quickly position these sockets on square and external 8-point fasteners.

Pivot the head to access fasteners from an angle.

For easy tightening and loosening, these sockets have pins that grip the slotted sides on bearing nuts.

The rounded-corner shape fits over ball joints commonly found in suspension and steering systems in vehicles.

These sockets fit the nuts found on water and gas valves.

Reach nuts obstructed by a fluid line or other barrier with these wrench heads.

The short bit on these sockets fits in spaces where height clearance is limited.

Extra-long bits allow access to hard-to-reach fasteners.

Extra-long bits allow access to hard-to-reach fasteners.

These sockets are also known as Robertson bits.

Extra-long bits allow access to hard-to-reach fasteners.

These sockets are also known as pin-in-hex or pin-in-socket bits.

A rubber insert grips the plug to prevent damage.

Achieve the best possible grip on hex fasteners and prevent rounding.

Move from lug nut to lug nut with the speed of a racecar pit crew. Up to five standard 6-point lug nuts stack up in the shank of these sockets, so you don’t have to stop to take the lug nuts out of the socket.

Tighten or loosen nuts and bolts without damaging the finish.

Attach these sockets to your spline-drive impact wrench.

Quickly position these sockets on square fasteners.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Turn 5-point tamper-resistant nuts and bolts often found on water and gas valves.

These sockets are made to withstand the high torque and force of impact tools.

The short bit on these sockets fits in spaces where height clearance is limited.

Extra-long bits help you access hard-to-reach fasteners.

These sockets are designed to tolerate continuous use with power tools and impact tools in high-volume production and assembly.

Pivot the head for access to fasteners in tight spots.

A rubber coating provides a comfortable grip.

Position the head anywhere along the handle.

Turn sockets from above when there's not room to swing a standard wrench handle.

Apply more torque than your wrench can deliver on its own. Use a multiplier with a torque wrench to ensure you do not exceed the maximum input torque.

With twice as many corners, 8-point sockets grab onto square-drive screws and nuts more quickly than 4-point sockets.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

The sockets in these sets have a cutout and extra length so you can reach and twist nuts without having to disconnect your line.

With more than double the clearance of standard sockets, the sockets in these sets access nuts on extra-long bolts.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

These sets organize what you need when working around live electrical circuits.

Grip the indentations around the outside of tri-groove fasteners.

Keep a convenient variety of drive styles and sizes of bit sockets on hand.

Tighten or loosen hard-to-reach fasteners with the extra-long bits in these socket sets.

Pivot the head of the sockets in these sets to access fasteners from an angle.

In addition to a standard square drive, the sockets in these sets have a hex-shaped base so you can use a ratchet wrench along with an open-end or box wrench for additional leverage.

Extra-long bits allow access to hard-to-reach fasteners.

In addition to a standard square drive, the sockets in these sets have a hex-shaped base so you can use a ratchet wrench along with an open-end or box wrench for additional leverage.

Pivot the head to access fasteners from an angle.

Attach one of the heads in these sets to a torque wrench for more leverage to loosen a stubborn fastener.

Get a strong grip in tight areas, even on fasteners that are rounded or damaged.

Remove and install dual wheels on trucks and trailers with the sockets in these sets.

These sockets are made to withstand the high torque and force of impact tools.

Use one socket to switch between two fastener sizes.

Carry fewer impact sockets—these five reversible impact sockets turn 10 fastener sizes. Flip the socket around to turn a different size.

The hex shape grips hex fasteners and prevents rounding. These sockets are made to withstand the high torque and force of impact tools.

Convert from one square drive size to another.

Pivot the head to access fasteners from an angle.

Push the square drive through the adapter to change size.

These adapters are insulated to protect against accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC 60900.

Safely lengthen the reach of your socket while working near flammable vapors and combustible residue.

The male ends of these extensions are rounded, so they can pivot to use your tool at an angle.

Lock your socket into these extensions to prevent accidental disengagement.

Reach a variety of spots with the confidence that your extension won’t disengage.

Tighten and loosen fasteners in hard-to-reach spots with a variety of extensions that lengthen the reach of your socket.

A digital display shows how torque measurements change as you turn the wrench. Set the desired torque and angle—lights and an audible alarm indicate when target has been reached or exceeded.

Already set to a specific torque limit, these adapters audibly click and release when you reach that setting to prevent overtightening.

Convert your socket into a flex socket without worrying about the adapter falling off.

Change a standard wrench handle into a ratcheting wrench.

Attach your square-drive sockets to drills, powered screwdrivers, and other tools that accept a hex shank.

Attach one of these adapters to a ratcheting box wrench to convert it to a ratcheting socket wrench.

Attach to your socket for a longer reach.

Attach one of these extensions to your impact socket to turn fasteners in hard-to-reach spaces.

Convert from one square drive size to another.

Attach your impact square-drive sockets to power drills, impact drivers, and other tools that accept a hex shank.

Pull the collar to quickly attach and remove sockets.

Use the pulsing of an air hammer along with the controlled turning of a hand wrench to release stuck fasteners without breaking them.

Attach your square-drive impact socket to a spline-drive impact wrench.

These adapters, which convert from one square drive size to another, were designed to tolerate continuous use with impact tools in high-volume production and assembly.

Use these adapters to connect sockets to impact wrenches and other power tools—they’re designed to tolerate continuous use in high-volume production and assembly.

The pin on these retainers is permanently connected to the ring, so they're less likely to dislodge when used with an impact wrench compared to two-piece retaining rings.

Store sockets on posts marked with the size.

Magnets hold sockets securely in place.

Move the sliding clips to any position along the rail to hold a variety of sockets.