We will reply to your message within an hour.
Retract the nose by pulling the knob.
Lock the nose into the retracted position by pulling the knob and rotating it 90°.
Quickly align, join, or hold machine components in place in food, pharmaceutical, and other sanitary environments. Pulling the plunger knob and twisting it 90° will lock the nose into its retracted position.
Lock the nose into the retracted position by pulling the handle and rotating it 90°.
The ring allows you to attach these spring plungers to a lanyard.
Lock the nose into the retracted position by pulling the ring and rotating it 90°.
Use the lanyard as a tether to secure the spring plunger to machinery and prevent accidental drops.
Thread onto machinery or attach a knob or handle to the threaded spindle.
Install by hand or with a hex key in low-clearance applications.
Lock the nose in the retracted position by pulling the knob and rotating it 90°.
Insert the nose into a panel; then thread on the nut and tighten using an installation wrench.
Install with a hex key for more torque than slotted long-nose spring plungers.
Install with a driver.
Fasten from the nose end with a wrench for more torque than slotted long-nose spring plungers.
These spring plungers have a nose that is about three-times longer than standard long hex-nose spring plungers.
Slotted on both ends for installation with a screwdriver.
Install these spring plungers with a screwdriver—they're slotted on one or both ends.
Install with a hex key for more torque than slotted ball-nose spring plungers.
Also known as jam set screws, these lock other screws in place, hold pins, and adjust spring tension. A black-oxide finish provides corrosion resistance in dry environments.
Stainless steel set screws have excellent corrosion resistance in most environments.
A wing-like toggle holds against the back of the material and spreads the force over a large area to hold 30 lbs. or more.
A spring-loaded toggle holds against the back of the material.
Use these stud-style anchors with nuts.
Bolts are beveled under the head for use in countersunk holes.
A shallow head makes these bolts good for low-clearance applications.
These stainless steel anchor studs offer excellent corrosion resistance.
A black-oxide finish provides mild corrosion resistance.
In addition to providing a backing for springs, these screw caps can also be used to control spring tension.
A quieter, more vibration-resistant alternative to traditional steel die springs, these polyurethane springs resist oxidation, oil, and abrasion in high-load, high-pressure applications.