The ring allows you to attach these spring plungers to a lanyard.

Use the lanyard as a tether to secure the spring plunger to machinery and prevent accidental drops.

Quickly align, join, or hold machine components in place in food, pharmaceutical, and other sanitary environments. Pulling the plunger knob and twisting it 90° will lock the nose into its retracted position.

Install by hand or with a hex key in low-clearance applications.

A quarter turn of the handle locks these plungers in the retracted position. The T-handle is easy to grip.

A smooth ball handle is easy to grip and won't catch on other parts.

Add a knob or handle to the threaded shank.

Lock the nose into the retracted position by pulling and rotating the knob.

Lock the nose in the retracted position by pulling the knob and rotating it 90°.

Weld these catches in place for a strong permanent hold.

Latch in several different directions—these latches either have spring-loaded balls or a ball-shaped strike plate.

These latches are adjustable; push the ball in and rotate it to adjust force as well as compensate for misalignment.

Their spring-loaded design withstands vibration, rattling, and shaking better than other push-to-close grab latches for a more secure hold.

Turn the screw on the latch to adjust the gripping force on the strike plate.

There's no need for a mating strike plate for these latches—their spring-loaded arm snaps to engage when closing the door.

These latches are spring-loaded to overcome resistance caused by gaskets and air pressure to close doors tightly.

Close and open these roller latches with a push—there's no need for a handle.

These spring-loaded latches withstand vibration, rattling, and shaking better than other face-mount push-to-close latches. Quickly push the latches closed to secure doors.

Keep doors on refrigerators and industrial enclosures closed.

For use on spray booths and drying ovens, these latches automatically open when the internal pressure of the enclosure reaches a set level.

When released, the spring-loaded ring handle returns to its recessed position to stay out of the way.

Quickly push these latches closed to secure doors and pull the ring handle with your finger to open them.

Attach these padlockable latches vertically to the side edge of doors on refrigerators, ovens, and industrial enclosures with the strike plate mounted behind it on the frame.

An emergency release handle offers a means of escape if a door closes with someone inside an enclosure.

Push doors closed and a return spring automatically snaps these locks together to secure them tightly in place. Pull them open with the included two-way key, which is also known as a double-bit key.

To prevent snags and accidental bumps, these locks have a recessed grip instead of a standard handle. They keep doors shut when you push them closed.

Pull the edge of the lock to open your door—the low-profile grip fits in tight spaces. These locks are a convenient alternative to cam and draw locks since they don’t require you to turn a cam or pull a latch.

For use on on sliding doors—including those on T-slotted framing systems—these locks have a two-piece design that locks when pushed closed. An edge-pull handle makes these locks easy to open and fits where traditional handles don’t.

An emergency release gives you a way to escape if the door closes with you or someone else inside the enclosure. Mount these locks horizontally to the face of doors on refrigerators and industrial enclosures with the strike plate mounted on the frame.

Quickly push to secure sliding doors on industrial cabinets and enclosure panels. These locks open with a square key.

The low profile means less of the lock is exposed, reducing the potential for damage.

Twist the knob on these locks to open doors and push them closed to secure. These locks are a convenient alternative to cam locks, which require you to rotate the cam to open and close doors.

Bolts are spring-loaded to stay latched until you activate the pull.

The spring-loaded bolt stays latched until you pull it back—slide the bolt and drop the knob into the notch to secure.

Choose these locks if you need locks that each open with a different key.

To prevent accidental opening, these latches have a safety catch.

Mount these latches on a corner to draw perpendicular surfaces together.

With a spring-loaded handle, these hold tighter than other turn-to-open draw latches and compensate for slight misalignment.

Mount these latches on a corner to draw perpendicular surfaces together. They have a safety catch to prevent accidental opening.

Lift and turn the handle 180° to open and close these latches. Add a padlock to secure.

For a complete latching system that you can open remotely, these latches come with a cable and handle. To close these latches, push them in, and they firmly grip the strike bolt on your door to hold it shut.

Mount your handle where it’s easy to reach even if your latch is not. To close these latches, push them in, and they firmly grip the strike bolt on your door to hold it shut.

With just a push, these latches firmly grip the strike bolt on your door to hold it shut. They come with a handle attached to the latch—no need to install a cable or rod.

These locks have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.

Get the vibration resistance of a tight-hold lock with the simple operation of a quarter-turn lock. These locks open with a two-way key. Also known as a double-bit key, it matches a keying system that’s common for industrial enclosures and other machinery but is more secure than a hex key or screwdriver.

Secure these locks with a Phillips screwdriver to keep a simple keying system around your facility. When you close them, a lever raises to tightly press your door or drawer shut with an attached screw.

These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.

These hinges with holes are spring loaded—pull the handle to retract the pin and disconnect a door; release the handle and the pin snaps back.

To make reconnecting doors easier than other pull release quick disconnect hinges, these have a keeper that holds the pin in a retracted position.

Remove the ring to pull out the pin.

Squeeze the hinge handles together to retract the pin and disconnect a door; release the handles and the pin snaps back.

For an easy connection, push the trailer-mounted ring into the vehicle-mounted jaw of these couplers, and a spring-loaded lever automatically secures the ring for towing.

Prevent accidental release and keep the tip from snagging.

Floor locks bolt or weld to the underside of your equipment and have a spring-loaded base with a nonskid floor pad to keep equipment stationary.