Retract the nose by pulling the knob.

Quickly align, join, or hold machine components in place in food, pharmaceutical, and other sanitary environments. Pulling the plunger knob and twisting it 90° will lock the nose into its retracted position.

Lock the nose into the retracted position by pulling the ring and rotating it 90°.

Thread onto machinery or attach a knob or handle to the threaded spindle.

Install by hand or with a hex key in low-clearance applications.

A quarter turn of the handle locks these plungers in the retracted position. The T-handle is easy to grip.

A smooth ball handle is easy to grip and won't catch on other parts.

Add a knob or handle to the threaded shank.

Use an arbor press or similar pressure tool to install these spring plungers into a panel.

Lock the nose into the retracted position by pulling and rotating the knob.

Install with a hex key for more torque than slotted long-nose spring plungers.

Fasten from the nose end with a wrench for more torque than slotted long-nose spring plungers.

Noses are up to four times longer than standard long-nose press-fit spring plungers.

Install these spring plungers with a screwdriver—they're slotted on one or both ends.

Designed with a flange to keep the plunger from being pushed through a hole when the ball is depressed.

Weld these catches in place for a strong permanent hold.

Bolts are spring-loaded to stay latched until you activate the pull.

The spring-loaded bolt stays latched until you pull it back—slide the bolt and drop the knob into the notch to secure.