Wrench-Adjustable Screw Jacks
Use these low-profile jacks in confined spaces. The screw adjustment lets you make small changes to the height of your load.
Jack with rigid saddle is also known as a spreader jack.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Saddle | |||||||
|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Max. Lift | Dia. | Base Wd. | Body Material | Each | |
With Rigid Saddle | ||||||||
| 3 | 6,000 | 3"-4" | 1" | 1 1/2" | 2" | Steel | 0000000 | 0000000 |
Ratchet Jacks
These jacks can be used to lift, spread, push, pull, and clamp. The ratcheting action raises or lowers the load one notch at a time. For clamping, turn the top plate 90° and ratchet the jack to secure your workpiece.
Note: Jacks must be loaded with at least 150 lbs. to safely lower your load one notch at a time. When loaded with less than 150 lbs., the notches are bypassed and the load will drop freely.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Toe | Base | Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max., tons | Range, lbs. | Max. Clamping Force, lbs. | Ht. | Max. Lift | Lg. | Wd. | Lg. | Wd. | Handle Lg. | Handle Material | Body Material | Fasteners Included | No. of Holes | Hole Dia. | Each | |
| 1 1/4 | 150-2,500 | 750 | 4 1/2"-49 3/4" | 45 1/4" | 4 1/2" | 1 3/8" | 7" | 4" | 32" | Steel | Iron | No | 12 | 1/2" | 000000 | 0000000 |
| 2 1/4 | 150-4,500 | 750 | 4 1/2"-38 5/8" | 34 1/8" | 4 1/2" | 1 3/8" | 7" | 4" | 32" | Steel | Iron | No | 12 | 1/2" | 000000 | 000000 |
Low-Profile Hydraulic Bottle Jacks
These jacks have a short body to fit in low-clearance spaces. Jacks with a low-profile handle pump from side to side, requiring less vertical space than other bottle jacks. Use them for lifting, spreading, bending, pushing, and straightening. For horizontal use, the pumping mechanism (where the handle meets the jack) must be positioned under the jack body.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Base | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Height | Maximum Lift | Ram OD | Dia. | Lg. | Wd. | Handle Length | Body Material | Features | Each | |
| 5 | 10,000 | 2 1/2"-3 1/4" | 3/4" | 1 1/8" | 3" | __ | __ | 9 1/2" | Steel | Low-Profile Handle, Removable Handle | 0000000 | 0000000 |
| 5 | 10,000 | 3 1/2"-5" | 1 1/2" | 1 1/8" | 3" | __ | __ | 9 1/2" | Steel | Low-Profile Handle, Removable Handle | 0000000 | 000000 |
| 10 | 20,000 | 4 3/4"-6" | 1 3/16" | 1 5/8" | 4 3/8" | __ | __ | 17 3/8" | Steel | Low-Profile Handle, Removable Handle | 0000000 | 000000 |
| 20 | 40,000 | 5 1/8"-6 3/8" | 1 3/16" | 2 1/8" | 4 3/4" | __ | __ | 23 7/8" | Steel | Low-Profile Handle, Removable Handle | 0000000 | 000000 |
| 30 | 60,000 | 7 1/4"-10 1/4" | 3 1/8" | 2 3/8" | __ | 7 5/8" | 5 5/8" | 39 3/8" | Steel | Removable Handle | 0000000 | 000000 |
Foot-Operated Tall-Body Hydraulic Bottle Jacks
Jacks are equipped with two foot pedals for hands-free use, one to raise the ram and another to lower it. Twice as tall as standard jacks, they save you time pumping. Use them for lifting, spreading, bending, pushing, and straightening.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Hand-Operated Tall-Body Hydraulic Bottle Jacks
Save time pumping with jacks that are twice as tall as standard bottle jacks. Use them for lifting, spreading, bending, pushing, and straightening. Secure equipment to the ram through a mounting hole on the ram’s tip.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Base | Mounting | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Max. Lift | Ram OD | Wd. | Lg. | Handle Lg. | Body Material | Fasteners Included | No. of Holes | Hole Dia. | Features | Each | |
| 1 1/2 | 3,000 | 25 5/8"-43 5/8" | 18" | 7/8" | 4 1/2" | 5 7/8" | 20" | Steel | __ | __ | __ | Removable Handle | 0000000 | 0000000 |
| 3 | 6,000 | 20 3/8"-35 1/2" | 15 1/8" | 1 3/16" | 4 3/8" | 5 7/8" | 20" | Steel | No | 2 | 5/16" | Removable Handle | 0000000 | 000000 |
| 5 | 10,000 | 20 1/8"-36 5/8" | 16 1/2" | 1 3/8" | 4 5/8" | 6 1/4" | 20" | Steel | No | 2 | 3/8" | Removable Handle | 0000000 | 000000 |
| 8 | 16,000 | 30 13/16"-53 13/16" | 23" | 1 5/8" | 5 1/8" | 6 1/2" | 20" | Steel | __ | __ | __ | Removable Handle | 0000000 | 000000 |
Heavy Duty Hydraulic Bottle Jacks
With fewer moving parts than standard bottle jacks, these are made for frequent use. The ram body screws onto the base so that it can be opened for inspection and repair. The ram is nickel-plated for corrosion resistance. Jacks can be used for lifting, spreading, bending, pushing, and straightening. For horizontal use, the pumping mechanism (where the handle meets the jack) must be positioned under the jack body.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Base | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Max. Lift | Ram OD | Wd. | Lg. | Handle Lg. | Body Material | Features | Each | |
| 3 | 6,000 | 8 1/2"-17 3/8" | 8 1/2" | 7/8" | 4 1/2" | 5 7/8" | 21" | Steel | Removable Handle | 0000000 | 0000000 |
| 3 | 6,000 | 10 1/4"-20 1/2" | 10 1/4" | 1 1/4" | 4 1/4" | 5 7/8" | 21" | Steel | Removable Handle | 0000000 | 000000 |
| 5 | 10,000 | 8 5/8"-17 5/8" | 9" | 1 1/4" | 4 3/4" | 6 1/4" | 21" | Steel | Removable Handle | 0000000 | 000000 |
| 5 | 10,000 | 10 1/4"-22" | 11 3/4" | 1 3/8" | 4 5/8" | 6 1/4" | 21" | Steel | Removable Handle | 0000000 | 000000 |
| 8 | 16,000 | 9 1/8"-19 1/2" | 10 1/8" | 1 3/8" | 5 1/4" | 6 1/2" | 21" | Steel | Removable Handle | 0000000 | 000000 |
| 8 | 16,000 | 11"-23 1/2" | 12 1/2" | 1 5/8" | 5 1/8" | 6 1/2" | 21" | Steel | Removable Handle | 0000000 | 000000 |
| 12 | 24,000 | 9"-19 1/2" | 10 1/2" | 1 5/8" | 5 3/4" | 6 3/4" | 21" | Steel | Removable Handle | 0000000 | 000000 |
| 20 | 40,000 | 11"-17 1/2" | 6 1/2" | 1 7/8" | 6 7/8" | 6 3/4" | 30 3/4" | Steel | Removable Handle | 0000000 | 000000 |
| 30 | 60,000 | 11 1/8"-18 1/8" | 7" | 2 1/8" | 7" | 5 1/2" | 30 3/4" | Steel | Removable Handle | 0000000 | 000000 |
| 60 | 120,000 | 12"-18 5/8" | 6 5/8" | 3 1/8" | 7 1/2" | 9 3/8" | 39 1/2" | Steel | Removable Handle | 000000 | 00000000 |
Hydraulic Bottle Jacks
Use these versatile jacks for lifting, spreading, bending, pushing, and straightening. For horizontal use, the pumping mechanism (where the handle meets the jack) must be positioned under the jack body.
Warning: Never use to support people or loads over people.
Capacity | Base | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Max. Lift | Ram OD | Lg. | Wd. | Handle Lg. | Body Material | Features | Each | ||
| A | 2 | 4,000 | 6 1/4"-12 1/8" | 5 7/8" | 7/8" | 2 7/8" | 3 1/2" | 12" | Steel | Removable Handle | 0000000 | 000000 |
| A | 4 | 8,000 | 6 3/4"-13" | 6 1/4" | 1 1/8" | 3 1/2" | 4" | 12" | Steel | Removable Handle | 0000000 | 00000 |
| A | 6 | 12,000 | 7 7/8"-15 1/8" | 7 1/4" | 1" | 3 7/8" | 4 3/8" | 12" | Steel | Removable Handle | 0000000 | 00000 |
| A | 8 | 16,000 | 7 7/8"-15 1/8" | 7 1/4" | 1 1/2" | 4" | 4 5/8" | 12" | Steel | Removable Handle | 0000000 | 00000 |
| A | 12 | 24,000 | 7 1/8"-12 3/8" | 5 3/8" | 1 5/8" | 4 3/4" | 5 1/4" | 12" | Steel | Removable Handle | 0000000 | 000000 |
| A | 12 | 24,000 | 8 5/8"-15 7/8" | 7 1/4" | 1 5/8" | 4 3/4" | 5 1/4" | 12" | Steel | Removable Handle | 0000000 | 000000 |
| A | 20 | 40,000 | 7 7/8"-14 1/8" | 6 1/4" | 2 1/4" | 5 5/8" | 6 1/8" | 12" | Steel | Removable Handle | 0000000 | 000000 |
| A | 20 | 40,000 | 9 5/8"-17 3/4" | 8 1/8" | 2 1/4" | 5 5/8" | 6 1/8" | 12" | Steel | Removable Handle | 0000000 | 000000 |
| A | 30 | 60,000 | 9 7/8"-16 7/8" | 7 1/8" | 2 1/4" | 6 3/4" | 6 7/8" | 12" | Steel | Removable Handle | 0000000 | 000000 |
| B | 6 | 12,000 | 8 1/2"-20 1/2" | 12" | 1 3/4" | 4 3/4" | 5 1/4" | 27 5/8" | Steel | Removable Handle | 000000 | 000000 |
| B | 13 | 26,000 | 9 1/8"-22 1/2" | 13 3/8" | 1 7/8" | 7" | 7 3/8" | 27 5/8" | Steel | Removable Handle | 000000 | 000000 |
Rams for Hydraulic Jacks
Push or pry apart material with these rams by attaching them to a hydraulic pump. Use hose to connect the ram to a pump; add a pressure gauge to monitor hydraulic oil pressure levels and guard against overload.
Style A rams are wedge-shaped to squeeze into tight spaces to pry, lift, and spread.
For technical drawings and 3-D models, click on a part number.
Pumps for Hydraulic Jacks
Connect these pumps to a ram to create a hydraulic jack. Use hose to connect; add a pressure gauge to monitor hydraulic oil pressure levels and guard against overload.
To use Style 1 and 2 pumps vertically, point the pump head (where the handle meets the pump) downward. Style 2 pumps are made of aluminum, making them lighter and more corrosion resistant than steel and iron pumps.
Pumps with two-speeds are quick to pump until the load is engaged, then pump more slowly for precise positioning.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Pump | Mounting | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Working Orientation | Oil Capacity, cu. in. | No. of Speeds | Lg. | Wd. | Ht. | Max. Pressure, psi | Pipe Size  | Thread Type | Gender | Material | Fasteners Included | No. of Holes | Hole Dia. | Each | |
Manual | ||||||||||||||||
| 1 | Horizontal, Vertical | 20 | 2 | 14 1/4" | 5" | 5 1/8" | 10,000 | 3/8 | NPTF | Female | Steel | No | 2 | 1/4" | 0000000 | 0000000 |
| 1 | Horizontal, Vertical | 45 | 1 | 24 7/8" | 5 3/8" | 5 3/4" | 10,000 | 3/8 | NPTF | Female | Steel | __ | __ | __ | 0000000 | 000000 |
| 1 | Horizontal, Vertical | 45 | 2 | 25 5/8" | 5 3/8" | 5 3/4" | 10,000 | 3/8 | NPTF | Female | Steel | __ | __ | __ | 0000000 | 000000 |
| 1 | Horizontal, Vertical | 145 | 2 | 23" | 5 1/2" | 6 5/8" | 10,000 | 3/8 | NPTF | Female | Steel | No | 4 | 7/16" | 0000000 | 000000 |
| 2 | Horizontal, Vertical | 20 | 1 | 13 1/4" | 3 3/4" | 5 5/8" | 10,000 | 1/4 | NPTF | Female | Aluminum | No | 2 | 1/4" | 000000 | 000000 |
| 2 | Horizontal, Vertical | 20 | 2 | 13 1/4" | 3 3/4" | 5 5/8" | 10,000 | 1/4 | NPTF | Female | Aluminum | No | 2 | 1/4" | 000000 | 000000 |
| 2 | Horizontal, Vertical | 55 | 2 | 21" | 4 3/4" | 7" | 10,000 | 3/8 | NPTF | Female | Aluminum | __ | __ | __ | 000000 | 000000 |
| 2 | Horizontal, Vertical | 155 | 2 | 21 3/4" | 7 1/8" | 9" | 10,000 | 3/8 | NPTF | Female | Aluminum | No | 2 | 3/8" | 000000 | 00000000 |
Hose for Hydraulic Jacks
This steel-reinforced hose has male threads.
Plastic hose consists of multiple layers for abrasion resistance and long life.
For technical drawings and 3-D models, click on a part number.
Black Rubber | Yellow Plastic | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Thread Type | Gender | Max. Pressure, psi | Lg., ft. | Reinforcement Material | Each | Each | ||
| 1/4, 3/8 | NPTF | Male | 10,000 | 6 | Steel | 000000 | 0000000 | 0000000 | 0000000 |
| 1/4 | NPTF | Male | 10,000 | 6 | Steel | 000000 | 00000 | 000000 | 00 |
| 3/8 | NPTF | Male | 10,000 | 6 | Steel | 000000 | 000000 | 0000000 | 000000 |
| 3/8 | NPTF | Male | 10,000 | 10 | Steel | 000000 | 000000 | 0000000 | 000000 |
| 3/8 | NPTF | Male | 10,000 | 20 | Steel | 000000 | 000000 | 0000000 | 000000 |
Pressure Gauges for Hydraulic Jacks
Monitor hydraulic oil pressure levels to guard against overload. These gauges are liquid filled to reduce needle vibration and include an adapter to mount the gauge in line with the hose.
For technical drawings and 3-D models, click on a part number.